Category Archives: Uncategorized

CRL 98″ EZ-Adjust Header Kits

Catalog Number: EHK980RB
Finish: OIL RUBBED BRONZE

Secures Shower Enclosure Not Going to Ceiling
Allows Horizontal (Side-to-Side) Adjustment of Hinge After Installation
No Hole Drilling Required Through Header or Adaptor, if Using Prima Hinge Model PPH06 or Senior Prima Hinge Model SRPPH06
Constructed of Heavy 6063-T5 Aluminum Alloy
For Use With 5/16″, 3/8″, and 1/2″ (8, 10, and 12 mm) Thick Glass

The CRL EZ-Adjust Shower Door Header Kit provides a safe and beautiful frameless shower installation by securing enclosures that do not reach the ceiling. Acting as a “crown” over the top of the glass, the EZ-Adjust Shower Door Header Kit is bracketed to each wall. The EZ-Adjust System allows adjustability after installation in that the hinge (PPH06 and SRPPH06 only) can be moved left and right as desired. No drilling through the Header is required for an Adaptor Block if Using Prima Hinge Model PPH06 or Senior Prima Hinge Model SRPPH06, due to a built-in adaptation to the hinges. Constructed of heavy 6063-T5 aluminum alloy, the EZ-Adjust Header Kit is stocked in several popular finishes. A choice of 98 and 144 inch (2.49 and 3.66 meters) stock lengths allow the user to cut as desired. A Snap-In Filler Insert for the door pocket, along with Wall Mounting Brackets and Clear Glazing Vinyl round out the Kit.
Finishes:

CRL 144″ EZ-Adjust Header Kits


Catalog Number: EHK144BA
Finish: BRITE ANODIZED

Secures Shower Enclosure Not Going to Ceiling
Allows Horizontal (Side-to-Side) Adjustment of Hinge After Installation
No Hole Drilling Required Through Header or Adaptor, if Using Prima Hinge Model PPH06 or Senior Prima Hinge Model SRPPH06
Constructed of Heavy 6063-T5 Aluminum Alloy
For Use With 5/16″, 3/8″, and 1/2″ (8, 10, and 12 mm) Thick Glass

The CRL EZ-Adjust Shower Door Header Kit provides a safe and beautiful frameless shower installation by securing enclosures that do not reach the ceiling. Acting as a “crown” over the top of the glass, the EZ-Adjust Shower Door Header Kit is bracketed to each wall. The EZ-Adjust System allows adjustability after installation in that the hinge (PPH06 and SRPPH06 only) can be moved left and right as desired. No drilling through the Header is required for an Adaptor Block if Using Prima Hinge Model PPH06 or Senior Prima Hinge Model SRPPH06, due to a built-in adaptation to the hinges. Constructed of heavy 6063-T5 aluminum alloy, the EZ-Adjust Header Kit is stocked in several popular finishes. A choice of 98 and 144 inch (2.49 and 3.66 meters) stock lengths allow the user to cut as desired. A Snap-In Filler Insert for the door pocket, along with Wall Mounting Brackets and Clear Glazing Vinyl round out the Kit.
Finishes:

CRL 144″ Apollo Style Shower Door Headers


Catalog Number: 3800064
Finish: BRITE SILVER

For 3/8″ and 1/2″ (10 and 12 mm) Tempered Glass
Available in Several Finishes
Sold in 12’ Stock Lengths

This CRL Apollo Style Header is a unique, heavy profile which provides maximum strength and unmatched beauty to the traditional shower enclosure.
Finishes:

CRL 144″ Euro Style Shower Door Headers

Catalog Number: 3800032
Finish: GOLD

For 3/8″ & 1/2″ (10 & 12 mm) Tempered Glass
Available in Several Finishes
Sold in 12’ Stock Lengths

This CRL Euro Style Header has slick, smooth styling makes the Euro Header the high fashion choice for today’s up-to-date, contemporary bathrooms.

Finishes:

CRL 144″ Round/Flat Profile Deluxe Headers Only


Catalog Number: SDH144BAEXT
Finish: BRITE ANODIZED

Available in Several Finishes
This is a Separately Sold Header Extrusion Bar Only for the CRL Header Kit

This extrusion bar is a component part only of a complete CRL Header Kit. To see the entire Kit that this part comes from, enter the same part number as this one in the Search Box, but delete EXT from the end of the Catalog Number.

Finishes:

CRL 144″ Round/Flat Profile Deluxe Header Kits


Catalog Number: SDH144BA
Finish: BRITE ANODIZED

Acts as a Decorative Crown Over Shower Enclosure to Secure Fixed Panels of Glass Not Going All the Way to the Ceiling
Available in Three Standard Lengths
Choice of Profiles: Round on One Side and Flat on the Other, or Flat on Both Sides of Header
Includes Snap-In Filler for Door Pocket, Wall Mounting Brackets, and Appropriate Vinyl for Snug Fit of Glass

The CRL Deluxe Header Only will provide additional support and a level of safety while securing glass panels not reaching the ceiling. Deluxe Header Kits are designed to allow installers to do in-house fabrication using a selection of component parts. Sold in 66, 98 and 144 inch (1676, 2489 and 3657 millimeter) lengths, the double profile extrusion has a narrow 1-1/4 inch (31.8 millimeter) face to minimize the visible sight line. A choice of facing edges (round or flat with mitered edges) is possible by simply reversing the extrusion. 90º, 135º or Adjustable Corners are sold separately. Also Available is a special Adapter Block for use on pivot hinge installations. A 2-1/4 inch (57.2 millimeter) Blank Mounting Bracket is offered for installations when the Header does not meet the wall at 90º, and the standard Wall Mounting Brackets cannot be used. Header is constructed of aluminum alloy 6463. This Header is adaptable to Senior Prima or Prima Hinges, Junior Prima Hinges should be used with the Junior Header Kit.

Finishes:

CRL 66″ Round/Flat Profile Deluxe Headers Only

Catalog Number: SDH660BAEXT
Finish: BRITE ANODIZED

Available in Several Finishes
This is a Separately Sold Header Extrusion Bar Only for the CRL Header Kit

This extrusion bar is a component part only of a complete CRL Header Kit. To see the entire Kit that this part comes from, enter the same part number as this one in the Search Box, but delete EXT from the end of the Catalog Number.

Finishes:

CRL 66″ Round/Flat Profile Deluxe Header Kits


Catalog Number: SDH660BA
Finish: BRITE ANODIZED

Acts as a Decorative Crown Over Shower Enclosure to Secure Fixed Panels of Glass Not Going All the Way to the Ceiling
Available in Three Standard Lengths
Choice of Profiles: Round on One Side and Flat on the Other, or Flat on Both Sides of Header
Includes Snap-In Filler for Door Pocket, Wall Mounting Brackets, and Appropriate Vinyl for Snug Fit of Glass

The CRL Deluxe Header Kit will provide additional support and a level of safety while securing glass panels not reaching the ceiling. Deluxe Header Kits are designed to allow installers to do in-house fabrication using a selection of component parts. Sold in 66, 98 and 144 inch (1676, 2489 and 3657 millimeter) lengths, the double profile extrusion has a narrow 1-1/4 inch (31.8 millimeter) face to minimize the visible sight line. A choice of facing edges (round or flat with mitered edges) is possible by simply reversing the extrusion. 90º, 135º or Adjustable Corners are sold separately. Also Available is a special Adapter Block for use on pivot hinge installations. A 2-1/4 inch (57.2 millimeter) Blank Mounting Bracket is offered for installations when the Header does not meet the wall at 90º, and the standard Wall Mounting Brackets cannot be used. Header is constructed of aluminum alloy 6463. This Header Kit is adaptable to Senior Prima or Prima Hinges, Junior Prima Hinges should be used with the Junior Header Kit.

Finishes:

CRL 98″ Flat/Flat Profile Deluxe Headers Only


Catalog Number: SQH980BAEXT
Finish: BRITE ANODIZED

Available in Several Finishes
This is a Separately Sold Header Extrusion Bar Only for the CRL Header Kit

This extrusion bar is a component part only of a complete CRL Header Kit. To see the entire Kit that this part comes from, enter the same part number as this one in the Search Box, but delete EXT from the end of the Catalog Number.

Finishes:

CRL 98″ Flat/Flat Profile Deluxe Header Kits


Catalog Number: SQH980BA
Finish: BRITE ANODIZED

Acts as a Decorative Crown Over Shower Enclosure to Secure Fixed Panels of Glass Not Going All the Way to the Ceiling
Available in Three Standard Lengths
Choice of Profiles: Round on One Side and Flat on the Other, or Flat on Both Sides of Header
Includes Snap-In Filler for Door Pocket, Wall Mounting Brackets, and Appropriate Vinyl for Snug Fit of Glass

The CRL Deluxe Header Kit will provide additional support and a level of safety while securing glass panels not reaching the ceiling. Deluxe Header Kits are designed to allow installers to do in-house fabrication using a selection of component parts. The extrusion has a narrow 1-1/4 inch (31.8 millimeter) face to minimize the visible sight line. 90º, 135º or Adjustable Corners are sold separately. Also Available is a special Adapter Block for use on pivot hinge installations. A 2-1/4 inch (57.2 millimeter) Blank Mounting Bracket is offered for installations when the Header does not meet the wall at 90º, and the standard Wall Mounting Brackets cannot be used. Header is constructed of aluminum alloy 6463. This Header Kit is adaptable to Senior Prima or Prima Hinges, Junior Prima Hinges should be used with the Junior Header Kit.
Finishes:

CRL 98″ Round/Flat Profile Deluxe Headers Only


Catalog Number: SDH980BAEXT
Finish: BRITE ANODIZED

Available in Several Finishes
This is a Separately Sold Header Extrusion Bar Only for the CRL Header Kit

This CRL Deluxe Header Only will provide additional support and a level of safety while securing glass panels not reaching the ceiling. Deluxe Headers are designed to allow installers to do in-house fabrication using a selection of component parts. Sold in 66, 98 and 144 inch (1676, 2489 and 3657 millimeter) lengths, the double profile extrusion has a narrow 1-1/4 inch (31.8 millimeter) face to minimize the visible sight line. A choice of facing edges (round or flat with mitered edges) is possible by simply reversing the extrusion. 90º, 135º or Adjustable Corners are sold separately. Also Available is a special Adapter Block for use on pivot hinge installations. A 2-1/4 inch (57.2 millimeter) Blank Mounting Bracket is offered for installations when the Header does not meet the wall at 90º, and the standard Wall Mounting Brackets cannot be used. Header is constructed of aluminum alloy 6463. This Header is adaptable to Senior Prima or Prima Hinges, Junior Prima Hinges should be used with the Junior Header.
Finishes:

CRL 98″ Round/Flat Profile Deluxe Header Kits


Catalog Number: SDH980BA
Finish: BRITE ANODIZED

Acts as a Decorative Crown Over Shower Enclosure to Secure Fixed Panels of Glass Not Going All the Way to the Ceiling
Available in Three Standard Lengths
Choice of Profiles: Round on One Side and Flat on the Other, or Flat on Both Sides of Header
Includes Snap-In Filler for Door Pocket, Wall Mounting Brackets, and Appropriate Vinyl for Snug Fit of Glass

The CRL Deluxe Header Kit will provide additional support and a level of safety while securing glass panels not reaching the ceiling. Deluxe Header Kits are designed to allow installers to do in-house fabrication using a selection of component parts. Sold in 66, 98 and 144 inch (1676, 2489 and 3657 millimeter) lengths, the double profile extrusion has a narrow 1-1/4 inch (31.8 millimeter) face to minimize the visible sight line. A choice of facing edges (round or flat with mitered edges) is possible by simply reversing the extrusion. 90º, 135º or Adjustable Corners are sold separately. Also Available is a special Adapter Block for use on pivot hinge installations. A 2-1/4 inch (57.2 millimeter) Blank Mounting Bracket is offered for installations when the Header does not meet the wall at 90º, and the standard Wall Mounting Brackets cannot be used. Header is constructed of aluminum alloy 6463. This Header Kit is adaptable to Senior Prima or Prima Hinges, Junior Prima Hinges should be used with the Junior Header Kit.

Finishes:

CRL Brass Wall Mount Brackets


Catalog Number: BWB2

For Use Only with SDH980, SDH660, and SDH144 Deluxe Header Kits

These CRL Brass Wall Mounting Brackets for Prima, Rondo or Shell Hinges are used with our Deluxe Header Kits. Two brackets and screws per package.

Finishes:

CRL Brass Adjustable Header Corner


Catalog Number: BHC373
Finish: BRASS

Screws Provided
Slides Neatly Into the “T” Slot in the Top of Our Deluxe Header
Available in 90 Degree, 135 Degree, and Adjustable Corners

These CRL Brass Adjustable Aluminum Corners are used with our Deluxe Header Kits. Screws are included with each corner purchased.

Finishes:

CRL Adapter Blocks Used with Senior Prima Hinges


Catalog Number: SRHAB01BA
Finish: BRITE ANODIZED

Allows Hinges to be Mounted Into Deluxe Header Kits
Fits Senior Prima, and Senior Cardiff Series Pivot Hinges
Available in Several Finishes

This CRL Senior Adapter Block is commonly used with the Senior Prima (not Junior or Regular series), and Senior Cardiff Series of hinges. The Senior Adapter Block allows the hinge to be mounted directly into the Shower Deluxe Header Assembly and can be adjusted sideways to any position required. The Adapter Block has a clearance notch which allows it to fit under the wall bracket when the hinge is mounted close to a wall. A drilled 1/4 inch (6 millimeter) hole in the header is required for installation and the hinge base plate must be removed to mount the hinge to the header. Each Senior Adapter Block is individually packed with a screw.

Finishes:

CRL Adapter Blocks Used with Prima Hinges


Catalog Number: HAB01BA
Finish: BRITE ANODIZED

Allows Hinges to be Mounted Into Deluxe Header Kits
Fits Prima, Cardiff, Shell and Rondo Series Pivot Hinges
Available in Several Finishes

This CRL Adapter Block is commonly used with the Prima (not Junior or Senior series), Cardiff, Shell, and Rondo Series of hinges. The Adapter Block allows the hinge to be mounted directly into the Shower Deluxe Header Assembly and can be adjusted sideways to any position required. The Adapter Block has a clearance notch which allows it to fit under the wall bracket when the hinge is mounted close to a wall. A drilled 3/16 inch (5 millimeter) hole in the header is required for installation and the hinge base plate must be removed to mount the hinge to the header. Each Adapter Block is individually packed with a screw.

Finishes:

CRL 90º End Mount Header Bracket


Catalog Number: CD406CH
Finish: CHROME

For Wall Mount Application

This CRL 90º End Mount Header Bracket can be used with our Junior Header Kits.

Finishes:

CRL 5/16″ & 3/8″ Header Vinyl


Catalog Number: HV380

For Use With the Deluxe Header Kits

The CRL Clear Deluxe Header Vinyl is used with our Deluxe Header Kits. CRL offers replacement vinyl if you want to keep extra on hand. Appropriate lengths of vinyl for 1/4 and 5/16 inch (6 and 8 millimeters) glass are also offered. All are sold in increments of eight feet. Minimum order is eight feet.

Finishes:

CRL 1/4″ Shower Header Vinyl


Catalog Number: HV140

For Use With the Deluxe Header Kits

The CRL Clear Deluxe Header Vinyl is used with our Deluxe Header Kits. CRL offers replacement vinyl if you want to keep extra on hand. Appropriate lengths of vinyl for 5/16 and 3/8 inch (8 and 10 millimeters) glass are also offered. All are sold in increments of eight feet. Minimum order is eight feet.

Finishes:

CRL Adjustable Corner


Catalog Number: CD373

Screws Provided
Slides Neatly Into the “T” Slot in the Top of Our Deluxe Header
Available in 90 Degree, 135 Degree, and Adjustable Corners

These CRL Adjustable Aluminum Corners are used with our Deluxe Header Kits. Screws are included with each corner purchased.

Finishes:

CRL Header Corners


Catalog Number: BHC135
Finish: BRASS

Screws Provided
Slides Neatly Into the “T” Slot in the Top of Our Deluxe Header
Available in 90 Degree, 135 Degree, and Adjustable Corners

These CRL Brass 135º Aluminum Corners are used with our Deluxe Header Kits. Screws are included with each corner purchased.

Finishes:

CRL Standard Wall Mounting Bracket


Catalog Number: SHB100

Package of Two
Same Bracket That is Included in Every Deluxe Header Kit

These CRL Standard Wall Mounting Brackets come standard with each Deluxe Shower Door Header Kit purchased. But make sure to keep a few extras on hand just in case!
Finishes:

CRL 2-1/4″ Blank Mounting Bracket


Catalog Number: SHB225

For Shower Door Deluxe Headers
Make Your Own Angles With This Blank Bracket

This CRL 2-1/4″ Aluminum Blank Mounting Bracket is used with our Shower Door Headers when the Header does not meet the wall at a typical 90 degrees and standard wall mounting brackets will not work. Make this Blank Wall Mounting Bracket any angle by identifying the angle needed in the field and fabricating the bracket accordingly. Simple scribing, cutting, and filing will make this bracket exactly what you need to attach to the “off-angle” wall. Sold individually.
Finishes:

CRL Replacement Vinyls for Dry Glaze U-Channel for 3/8″ Glass


Catalog Number: FV4DUC

Replacement Vinyl for Cat. No. DUC38 Dry Glaze U-Channels
Clear Vinyl Secures Glass in Channel and Eliminate the Need for Messy Silicone
Two Pieces Available: Flexible and Rigid

The CRL Flexible Vinyl is inserted into Cat. No. DUC38 U-Channel on the interior of the shower, while the CRL Rigid Leg Vinyl is inserted into the U-Channel on the exterior side. Minimum order is one each. A Packing Charge will be added to orders of fewer than 10 combined lengths.

Finishes:

CRL Dry Glaze U-Channel for 3/8″ Glass Only


Catalog Number: DUC38BA
Finish: BRITE ANODIZED

Clear Vinyl Secures Glass in Channel and Eliminate the Need for Messy Silicone
Recess in Bottom Channel Hides Caulk Line
Channel and Matching End Caps Available in Several Popular Finishes

Dry Glaze U-Channel offers the installer many benefits. It eliminates the need for messy silicone between the glass and metal, dramatically reducing installation time. If the glass is ever scratched or damaged it can be removed without the need to cut out the sealant. The extruded aluminum channel is wrapped in a protective poly sleeve with two pieces of clear vinyl to secure 3/8″ (10 mm) glass. The “Flexible” Vinyl goes on the interior of the shower, while the “Rigid Leg” Vinyl “rolls in” on the exterior side. Matching finish End Caps adhere to channel ends, and must be ordered separately.

Finishes:

CRL Regular U-Channel for 1/2″ Glass – 98″


Catalog Number: SDCR12BA
Finish: BRITE ANODIZED

Wet Glazed With Clear Silicone to Secure Fixed Panels of Glass
Lower Profile Allows Maximum Glass Exposure
Popular 98″ (2.49 m) Stock Lengths

This CRL Regular U-Channel has a low profile. The 3/8 inch (9.5 millimeter) height allows for maximum glass exposure. Most commonly used on the bottom and side of fixed panels, while the Deep U-Channel is commonly used on top for maximum coverage. Cat. No. 33SMRC Mildew Resistant Clear Silicone is used to secure glass in the channel.

Finishes:

CRL Regular U-Channel for 3/8″ Glass – 98″


Catalog Number: SDCR38BA
Finish: BRITE ANODIZED

Wet Glazed With Clear Silicone to Secure Fixed Panels of Glass
Lower Profile Allows Maximum Glass Exposure
Popular 98″ (2.49 m) Stock Lengths

This CRL Regular U-Channel has a low profile. The 3/8 inch (9.5 millimeter) height allows for maximum glass exposure. Most commonly used on the bottom and side of fixed panels, while the Deep U-Channel is commonly used on top for maximum coverage. Cat. No. 33SMRC Mildew Resistant Clear Silicone is used to secure glass in the channel.
Finishes:

CRL Deep U-Channel for 3/8″ Glass – 144″


Catalog Number: SDCD3812BA
Finish: BRITE ANODIZED

Deep Pocket Does Excellent Job of Securing Fixed Panels of Glass
Wet Glazed With Clear Silicone to Secure Glass
Popular 98″ (2.49 m) or 144″ (3.66 m) Stock Lengths
End Caps Offered to Conceal Ends of Channel
May Be Used Alone or With Regular Depth U-Channel

This 3/4 inch (19 millimeter) tall profile CRL Deep U-Channel is used for securing fixed panels of glass to the wall, ceiling or floor. Widths suitable for 3/8 and 1/2 inch (10 and 12 millimeter) thick glass are available, and are individually wrapped to protect the finish. The 3/4 inch (19 millimeter) tall profile Deep U-Channel can be used also as the top channel in installations where the glass must be inserted into the top, then lowered into the Regular U-Channel used at the bottom of the enclosure. 144 inch (3.66 meter) stock length.

Finishes:

CRL Deep U-Channel for 3/8″ Glass – 98″


Catalog Number: SDCD38BA
Finish: BRITE ANODIZED

Deep Pocket Does Excellent Job of Securing Fixed Panels of Glass
May Be Used Alone or With Regular Depth U-Channel
Wet Glazed With Clear Silicone to Secure Glass
All Available in Popular 98″ (2.49 m) Lengths, Some Available in Economical 144″ (3.66 m) Stock Lengths
End Caps Offered to Conceal Ends of Channel

Deep U-Channel is for securing fixed panels of glass to the wall, ceiling or floor. Widths suitable for 3/8 and 1/2 inch (10 and 12 millimeter) thick glass are available, and are individually wrapped to protect the finish. The 3/4 inch (19 millimeter) tall profile Deep U-Channel can be used also as the top channel in installations where the glass must be inserted into the top, then lowered into the Regular U-Channel used at the bottom of the enclosure. Over a dozen stock finishes are offered.

Finishes:

CRL Deep U-Channel for 1/2″ Glass – 144″


Catalog Number: SDCD1212BA
Finish: BRITE ANODIZED

Deep Pocket Does Excellent Job of Securing Fixed Panels of Glass
Wet Glazed With Clear Silicone to Secure Glass
Popular 98″ (2.49 m) or 144″ (3.66 m) Stock Lengths
End Caps Offered to Conceal Ends of Channel
May Be Used Alone or With Regular Depth U-Channel

This 3/4 inch (19 millimeter) tall profile CRL Deep U-Channel is used for securing fixed panels of glass to the wall, ceiling or floor. Widths suitable for 3/8 and 1/2 inch (10 and 12 millimeter) thick glass are available, and are individually wrapped to protect the finish. The 3/4 inch (19 millimeter) tall profile Deep U-Channel can be used also as the top channel in installations where the glass must be inserted into the top, then lowered into the Regular U-Channel used at the bottom of the enclosure. 144 inch (3.66 meter) stock length.

Finishes:

CRL Deep U-Channel for 1/2″ Glass – 98″


Catalog Number: SDCD12BA
Finish: BRITE ANODIZED

Deep Pocket Does Excellent Job of Securing Fixed Panels of Glass
May Be Used Alone or With Regular Depth U-Channel
Wet Glazed With Clear Silicone to Secure Glass
All Available in Popular 98″ (2.49 m) Lengths, Some Available in Economical 144″ (3.66 m) Stock Lengths
End Caps Offered to Conceal Ends of Channel

Deep U-Channel is for securing fixed panels of glass to the wall, ceiling or floor. Widths suitable for 3/8 and 1/2 inch (10 and 12 millimeter) thick glass are available, and are individually wrapped to protect the finish. The 3/4 inch (19 millimeter) tall profile Deep U-Channel can be used also as the top channel in installations where the glass must be inserted into the top, then lowered into the Regular U-Channel used at the bottom of the enclosure. Over a dozen stock finishes are offered.

Finishes:

CRL Jamb With Vinyl Wipe


Catalog Number: AJ78BA
Finish: BRITE ANODIZED

For Use on Strike Side or Hinge Side of the Door Opening
Clear Vinyl Included With Each Set
Available in Several Popular Finishes

This extruded CRL Aluminum Jamb with Clear Vinyl Wipe provides water resistance when the door is closed. Clear Vinyl is included with each set. It can be used on the strike side of the door opening with any of our Frameless Shower Door Hinges. Also applicable to the hinge side when used with Top and Bottom Mount Pivot Hinges, such as the Prima, Senior Prima, Junior Prima, Cardiff, Shell and Rondo Series. Stock length is 78 inches (1.98 meters).
Finishes:

CRL U-Channel with Wipe for 1/2″ Glass – 98″


Catalog Number: SDW12BA
Finish: BRITE ANODIZED

Aluminum Channel With Built-In Vinyl Wipe Fits Onto Bottom of Shower Door
Available in Several Finishes
Maintains Continuous Metal Sightline When Used on Door Next to Fixed Panels With Deep U-Channel

This door bottom mounted CRL U-Channel with Door Wipe has a 1/2 inch (12.7 millimeter) profile, which makes an even sight line when used next to a fixed panel glazed with Deep U-Channel on the bottom. While many will choose to use a clear wipe at the bottom of the shower door for an ‘all-glass’ look, others will want the continuous appearance of metal while using this Shower Door U-Channel With Wipe.

Finishes:

CRL U-Channel with Wipe for 3/8″ Glass – 98″


Catalog Number: SDW38BA
Finish: BRITE ANODIZED

Aluminum Channel With Built-In Vinyl Wipe Fits Onto Bottom of Shower Door
Available in Several Finishes
Maintains Continuous Metal Sightline When Used on Door Next to Fixed Panels With Deep U-Channel

This door bottom mounted CRL U-Channel with Door Wipe has a 1/2 inch (12.7 millimeter) profile, which makes an even sight line when used next to a fixed panel glazed with Deep U-Channel on the bottom. While many will choose to use a clear wipe at the bottom of the shower door for an ‘all-glass’ look, others will want the continuous appearance of metal while using this Shower Door U-Channel With Wipe.

Finishes:

CRL Junior Header Adapter Blocks


Catalog Number: JRHAB01BGA
Finish: BRITE GOLD

For Use With Junior Prima Hinges and Junior Header Kits Only

This CRL Junior Adapter Block is used with our Junior Prima Hinges and our Junior Header Kit. The Junior Header Kit for 1/4 inch (6 millimeter) glass provides support to shower enclosures not going all the way to the ceiling.

Finishes:

CRL 98″ Junior Header Kits


Catalog Number: HEADER06CH
Finish: CHROME

Kit Contains Everything Required for Installation
Secures Shower Enclosures Not Going All the Way to the Ceiling
Available in Several Finishes
Dual Profile Allows User Choice of Soft Rounded Side or Flat Side

The CRL Junior Header Kit for 1/4 inch (6 millimeter) thick glass provides support to shower enclosures not going all the way to the ceiling. Installers can do in-house or jobsite fabrication using the components provided.

Finishes:

CRL Junior Header Replacement Snap-In Filler


Catalog Number: 1N06CH
Finish: BRITE ANODIZED

36″ (914 mm) Replacement Snap-In Filler
Several Colors Available
Works With Junior Header

CRL 6 mm Junior Header Snap-In Filler is a 36 inch (914 millimeter) replacement piece that puts the finishing touch on the Junior Header. By simply press fitting the Filler into the Header directly above the door pocket, you create an even sightline of metal, and fill what would have been an unattractive Header pocket.
Finishes:

CRL 122″ Snap-In Filler Strip


Catalog Number: 3800502
Finish: BRITE GOLD

For Use With Apollo and Euro Headers

This CRL Snap-In Filler Strip snaps into header to fill in the pocket above the shower door, between the fixed panels. Vinyl fills 1/2 inch pocket when using 3/8 inch glass. For use with Apollo and Euro Headers. Filler strip snaps into header above door for a smooth, seamless look. Sold per length.

Finishes:

CRL 72″ Snap-In Filler Strip


Catalog Number: S1F720BAEXT
Finish: BRITE ANODIZED

For Use With CRL Shower Door Deluxe Headers

A 36 inch (914 millimeter) piece of Snap-in-Filler is provided with each Deluxe Header Kit, and is also available for replacement in both 36 and 72 inch (914 and 1829 millimeter) lengths. Snap-in-Filler puts the finishing touch on the installation of the Deluxe Header. By simply press fitting the Filler into the Header directly above the door pocket, you create an even sightline of metal, and fill what would have been an unattractive Header pocket.

Finishes:

CRL 36″ Snap-In Filler Strip


Catalog Number: S1F360BAEXT
Finish: BRITE ANODIZED

For Use With CRL Shower Door Deluxe Headers

A 36 inch (914 millimeter) piece of Snap-in-Filler is provided with each Deluxe Header Kit, and is also available for replacement in both 36 and 72 inch (914 and 1829 millimeter) lengths. Snap-in-Filler puts the finishing touch on the installation of the Deluxe Header. By simply press fitting the Filler into the Header directly above the door pocket, you create an even sightline of metal, and fill what would have been an unattractive Header pocket.

Finishes:

CRL End Caps for 1/2″ Deep U-Channel


Catalog Number: SDCEC12BN
Finish: BRUSHED NICKEL

Available in Several Attractive Finishes
Covers Open End of SDCD12 and DUC38 Series U-Channels
Easy to Install

This CRL End Cap is designed to cover exposed ends of the Deep U-Channel to improve the beauty of your shower installation. Available in several attractive finishes, the End Caps are easily installed using a dab of Silicone.

Finishes:

CRL End Caps for 3/8″ Deep U-Channel


Catalog Number: SDCEC38CH
Finish: CHROME

Available in Several Attractive Finishes
Covers Open End of SDCD38 Series U-Channels
Easy to Install

This CRL End Cap is designed to cover exposed ends of the Deep U-Channel to improve the beauty of your shower installation. Available in three attractive finishes, the End Caps are easily installed using a dab of Silicone.

Finishes:

CRL Frameless Header 98″ Length


Catalog Number: 3800757
Finish: BRITE SILVER

Available in Brite Silver and Brite Gold

This CRL Frameless Header is designed for use on 1/4 inch frameless glass units.

Finishes:

CRL 3/8″ Twin Roll Headers 98″ Length


Catalog Number: 3800790
Finish: BRITE GOLD

Available in 2 Finishes

This CRL 3/8″ Twin Roll Header is designed for use with sliding panels that have a total weight of 200 pounds or less.

Finishes:

CRL Twin Roll Headers 98″ Length


Catalog Number: 3800591
Finish: BRITE GOLD

Available in Several Colors

This CRL Twin Roll Header is designed for use with sliding panels that have a total weight of 135 pounds or less.

Finishes:

CRL Twin Roll Headers 15′ Length


Catalog Number: 3800591
Finish: BRITE GOLD

Available in Several Colors

This CRL Twin Roll Header is designed for use with sliding panels that have a total weight of 135 pounds or less.

Finishes:

CRL Daylite Headers 98″ Length


Catalog Number: 3800596
Finish: SATIN SILVER

Available in Several Finishes

This CRL Daylite Header is designed to be used with the standard framed style daylite unit.

Finishes:

98″ Standard Bottom Track


Catalog Number: 3800604
Finish: SATIN SILVER

Available in 98″ or 15’0″ (2.5 or 4.6 m) Lengths

This CRL Standard Bottom Track is a classic design, for use with framed twin roll panels.

Finishes:

98″ E-Z Clean Bottom Track


Catalog Number: 3800615
Finish: BRITE GOLD

Available in 98″ or 15’0″ (2.5 or 4.6 m) Lengths

The CRL E-Z Clean Bottom Track can be used with either framed or 1/4 and 3/8 inch frameless track guides.

Finishes:

98″ E-Z Clean Track


Catalog Number: 3800797
Finish: BRITE SILVER

Available in 98″ or 15’0″ (2.5 or 4.6 m) Lengths

33sc, rtv408c, bl9934, at04512, 491014, 17600.

Finishes:

98″ Magnetic 135º Post


Catalog Number: 3800620
Finish: SATIN SILVER

Available in 98″ or 11’10″ (2.5 or 3.6 m) Lengths

This CRL Magnetic 135º Post is for use with framed daylite units.

Finishes:

11’10″ Magnetic 135º Post


Catalog Number: 3800626
Finish: BRITE SILVER

Available in 98″ or 11’10″ (2.5 or 3.6 m) Lengths

This CRL Magnetic 135º Post is for use with framed daylite units.

Finishes:

11’10″ Magnetic 90º Post


Catalog Number: 3800634
Finish: BRITE SILVER

Available in 98″ or 11’10″ (2.5 or 3.6 m) Lengths

This CRL Magnetic 90º Post is for use with framed daylite units.

Finishes:

98″ Magnetic 90º Post


Catalog Number: 3800628
Finish: SATIN SILVER

Available in 98″ or 11’10″ (2.5 or 3.6 m) Lengths

This CRL Magnetic 90º Post is for use with framed daylite units.

Finishes:

98″ Universal Post


Catalog Number: 3800636
Finish: SATIN SILVER

Available in 98″ or 11’10″ (2.5 or 3.6 m) Lengths

This CRL Universal Post is available in several finishes and lengths.

Finishes:

11’10″ Universal Post


Catalog Number: 3800642
Finish: BRITE SILVER

Available in 98″ or 11’10″ Lengths

This CRL Universal Post is available in several finishes and lengths.

Finishes:

98″ Standard Rails


Catalog Number: 3800503
Finish: BRITE GOLD

Available in 98″ or 11′-10″ (2.5 or 3.6 m) Lengths

This CRL Standard Rail can be used as side rail on twin roll sliding enclosures and as top and bottom rail on doors and fixed panels.

Finishes:

11’10″ Standard Rails


Catalog Number: 3800507
Finish: BRITE GOLD

Available in 98″ or 11’10″ Lengths

This CRL Standard Rail can be used as side rail on twin roll sliding enclosures and as top and bottom rail on doors and fixed panels.

Finishes:

98″ Magnetic Rails


Catalog Number: 3800510
Finish: BRITE SILVER

Available in 98″ or 11’10″ (2.5 or 3.6 m) Lengths

This CRL Magnetic Rail is used as a side rail on magnetic closure doors.

Finishes:

16′ Hanger Rails


Catalog Number: 3800522
Finish: BRITE SILVER

Available in 98″ or 16’0″ (2.5 or 4.9 m) Lengths

This CRL Hanger Rail is used as the top rail on twin roll sliding door units. The mounting slot on the top allows for the mounting of a roller bracket.

Finishes:

98″ Hanger Rails


Catalog Number: 3800516
Finish: SATIN SILVER

Available in 98″ or 16’0″ (2.5 or 4.9 m) Lengths

This CRL Hanger Rail is used as the top rail on twin roll sliding door units. The mounting slot on the top allows for the mounting of a roller bracket.

Finishes:

16′ E-Z Clean Rails


Catalog Number: 3800530
Finish: BRITE SILVER

Available in 98″ or 16’0″ (2.5 or 4.9 m) Lengths

This CRL E-Z Clean Rail is used as a bottom rail on twin roll sliding door sets, the E-Z Clean rail has a guide slot in it for use with E-Z Clean bottom track and track guide 3801007.

Finishes:

98″ E-Z Clean Rails


Catalog Number: 3800524
Finish: SATIN SILVER

Available in 98″ or 16’0″ (2.5 or 4.9 m) Lengths

This CRL E-Z Clean Rail is used as a bottom rail on twin roll sliding door sets, the E-Z Clean rail has a guide slot in it for use with E-Z Clean bottom track and track guide 3801007.

Finishes:

12′ Frameless Adapter Rails


Catalog Number: 3800737
Finish: BRITE SILVER

Available in 98″ or 12’0″ (2.5 or 3.6 m) Lengths

This CRL Frameless Adapter Rail is used as wall jamb and bottom rail for fixed panels in 1/4 inch dual configuration kits. Panels are wet glazed using clear setting blocks and clear silicone.

Finishes:

CRL Frameless Shower Door Half-Round Threshold


Catalog Number: SDT980BA
Finish: BRITE ANODIZED

Assists Watershed Back Into Shower
Perfect for Flat or Out-Sloping Curbs

This CRL Shower Door Threshold is mounted directly below the shower door to let the water drain back into the shower stall. Ideal for flat or out-sloping curbs. The rounded low contour on the Half Round Threshold will not harm feet. The Tapered Style Sill leaves a minimal sightline from the exterior of the shower. Thresholds may be used in conjunction with a bottom sweep.

Finishes:

CRL Frameless Shower Door Tapered Threshold


Catalog Number: S1L001CH
Finish: CHROME

Assists Watershed Back Into Shower
Perfect for Flat or Out-Sloping Curbs

These CRL Shower Door Thresholds are mounted directly below the shower door to let the water drain back into the shower stall. Ideal for flat or out-sloping curbs. The rounded low contour of the Half Round Threshold will not harm feet. The Tapered Style Sill leaves a minimal sightline from the exterior of the shower. These thresholds may be used in conjunction with a bottom sweep. Use Mildew Resistant Silicone Sealant to adhere to curb of shower stall.

Finishes:

98″ Twin Roll Jambs


Catalog Number: 3800534
Finish: BRITE SILVER

Available in 98″ or 12’0″ (2.5 or 3.6 m) Lengths

This CRL Twin Roll Wall Jamb is used as the upright wall receiver for the sliding panels.

Finishes:

12′ Twin Roll Jambs


Catalog Number: 3800538
Finish: BRITE SILVER

Available in 98″ or 12’0″ (2.5 or 3.6 m) Lengths

This CRL Twin Roll Wall Jamb is used as the upright wall receiver for the sliding panels.

Finishes:

98″ Pivot Bottom Jamb


Catalog Number: 3800564
Finish: SATIN SILVER

Available in 98″ or 16’0″ (2.5 or 4.9 m) Lengths

This CRL Pivot Bottom Jamb is available in several finishes and lengths.

Finishes:

98″ Pivot Wall Jambs


Catalog Number: 3800548
Finish: SATIN SILVER

Available in 98″ or 16’0″ (2.5 or 4.9 m) Lengths

This CRL Pivot Wall Jamb is used with a pivot bracket and retainer set catalog number 3801019 or 3801031.

Finishes:

11’10″ Magnetic Fill Jambs


Catalog Number: 3800587
Finish: BRITE GOLD

Available in 98″ or 11’10″ (2.5 or 3.6 m) Lengths

This CRL Magnetic Fill Jamb slips on to a side rail.

Finishes:

98″ Magnetic Fill Jambs


Catalog Number: 3800580
Finish: SATIN SILVER

Available in 98″ or 11’10″ (2.5 or 3.6 m) Lengths

This CRL Magnetic Fill Jamb slips on to a side rail.

Finishes:

12′ Magnetic Strike


Catalog Number: 3800754
Finish: BRITE SILVER

Available in 98″ or 12’0″ (2.5 or 3.6 m) Lengths

This CRL Magnetic Strike Jamb is for use on glass-to-glass closures. This extrusion will bond to 1/4 inch glass only. There is an insert groove for a magnet.

Finishes:

98″ Magnetic Strike


Catalog Number: 3800749
Finish: BRITE SILVER

Available in 98″ or 12’0″ (2.5 or 3.6 m) Lengths

This CRL Magnetic Strike Jamb is for use on glass-to-glass closures. This extrusion will bond to 1/4 inch glass only. There is an insert groove for a magnet.

Finishes:

16′ Magnetic Strike Jambs


Catalog Number: 3800576
Finish: SATIN SILVER

Available in 98″ or 16’0″ (2.5 or 4.9 m) Lengths

This CRL Magnetic Strike Jamb is used for wall mounting.

Finishes:

98″ Magnetic Strike Jambs


Catalog Number: 3800572
Finish: SATIN SILVER

Available in 98″ or 16’0″ (2.5 or 4.9 m) Lengths

This CRL Magnetic Strike Jamb is used for wall mounting.
Finishes:

98″ Narrow Bottom Jambs


Catalog Number: 3800556
Finish: SATIN SILVER

Available in 98″ or 16’0″ (2.5 or 4.9 m) Lengths

This CRL Narrow Bottom Jamb comes in several colors and different lengths.
Finishes:

98″ – 1/2″ Wide U-Channel


Catalog Number: 3800543
Finish: BRITE GOLD

Available in 98″ and 12′ (2.5 and 3.6 m) Lengths in Several Finishes

This CRL Curb U-Channel is for use on frameless units.
Finishes:

98″ – 3/8″ Wide U-Channel


Catalog Number: 3800670
Finish: BRITE SILVER

Available in 98″ (2.5 m) Lengths and Several Finishes

This CRL Curb U-Channel is for use on frameless units.
Finishes:

10′ Long 2″ High Filler Stock


Catalog Number: 3800699
Finish: BRITE GOLD

Available in 98″ or 10′ (2.5 or 3 m) Lengths

This CRL 2″ High U-Channel Filler Stock is available in several finishes and lengths.

Finishes:

98″ Long 2″ High Filler Stock


Catalog Number: 3800695
Finish: BRITE GOLD

Available in 98″ or 10′ (2.5 or 3 m) Lengths

This CRL 2″ High U-Channel Filler Stock is available in several finishes and lengths.

Finishes:

CRL Roman Series Glass-to-Glass Mount Hinges


Catalog Number: R0M045CH
Finish: CHROME

Many Beautiful Finishes
Self-Centering With Reversible 5 Degree Pivot Pin
Custom Pivot Pin Available
Three Year Warranty

The CRL Roman 045 Series 135 Degrees Glass-to-Glass Hinges are able to accommodate 5/16 to 1/2 inch (8 to 12 millimeter) glass. Roman Hinges are self-centering, and contain a reversible 5 Degree Pivot Pin. In addition, Custom Pivot Pins are available to accommodate “off angle” installations. Made of solid brass with all moving parts (pins and springs) in stainless steel.

Finishes:

CRL Cologne Series Glass-to-Glass Mount Hinges


Catalog Number: C0L045CH
Finish: CHROME

Accommodates 3/8″ to 1/2″ (10 to 12 mm) Glass
Available in Many Beautiful Finishes
Three Year Warranty

The CRL Cologne Series of professional hinges is designed to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. Available in both Wall Mount and Glass-to-Glass styles, it provides design flexibility. Cologne Series Hinges are constructed of solid brass with all moving parts (pins and springs) in stainless steel. Two strategically placed pins inside the hinge provide template options, and satisfy two schools of thought for mounting shower door hinges. It allows the Cologne Hinge to be used with it’s own CRL “mouse-ears” cut-out, or in some cases fit competitive “mouse-ear” cut-outs. On the other hand, to enable increased adjustability, the two pins can be removed which allows the Cologne Hinge to fit it’s own CRL rectangular shape, square cornered cut-out, or in some cases, fit competitive rectangular shaped, square cornered cut-outs.
Finishes:

CRL Prima 135L Left Hand Glass-to-Glass Mount Hinge


Catalog Number: PPH135LCH
Finish: CHROME

135 Degree Glass-to-Glass, Self-Centering with Optional 5 Degree Pivot Pin Set
3 Year Warranty
U.S. Patent 5297313
Available in Several Beautiful Finishes

The CRL Prima Series of professional hinges is able to accommodate 5/16 to 3/8 inch (8 to 10 millimeter) tempered safety glass. A variety of four styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Prima Hinges are self-centering, with four springs for maximum retention strength. Optional 5 Degree Pivot Pin Sets are available to accommodate “off angle” installations. Some advantages of pivot type hinges include the fact that they carry the majority of the weight on the bottom, and have the ability to be inset from the wall, enabling clearance for towel bars and other projections.

Finishes:

CRL Prima 135R Right Hand Glass-to-Glass Mount Hinge


Catalog Number: PPH135RCH
Finish: CHROME

135 Degree Glass-to-Glass, Self-Centering with Optional 5 Degree Pivot Pin Set
3 Year Warranty
U.S. Patent 5297313
Available in Several Beautiful Finishes

The CRL Prima Series of professional hinges is able to accommodate 5/16 to 3/8 inch (8 to 10 millimeter) tempered safety glass. A variety of four styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Prima Hinges are self-centering, with four springs for maximum retention strength. Optional 5 Degree Pivot Pin Sets are available to accommodate “off angle” installations. Some advantages of pivot type hinges include the fact that they carry the majority of the weight on the bottom, and have the ability to be inset from the wall, enabling clearance for towel bars and other projections.

Finishes:

CRL Geneva 045 135º Glass-to Glass Hinge


Catalog Number: GEN045CH
Finish: CHROME

Self-Centering with Reversible 5 Degree Pivot Pin
Custom Pivot Pin Available
Available in Several Beautiful Finishes
3 Year Warranty

These new CRL Geneva 045 Series 135 Degree Glass-to-Glass Hinges are used in conjunction with the appropriate Geneva Pony Wall Mount Hinge for a 135 Degree angle. Geneva Hinges are self-centering, and contain a reversible 5 Degree Pivot Pin. In addition, Custom Pivot Pins are available to accommodate “off angle” installations. Made of solid brass with all moving parts (pins and springs) in stainless steel.

Finishes:

CRL Geneva 545 5º Pre-Set Glass-to-Glass Hinge


Catalog Number: GEN545CH
Finish: CHROME

Self-Centering with Reversible 5 Degrees Pivot Pin with Custom Pivot Pin Available
Available in Several Beautiful Finishes
3 Year Warranty

These new CRL Geneva 135 Degrees Glass-to-Glass Hinges are used in conjunction with the appropriate Geneva Pony Wall Mount Hinge for a 135 Degrees angle. Geneva Hinges are self-centering, and contain a reversible 5 Degree Pivot Pin. In addition, Custom Pivot Pins are available to accommodate “off angle” installations. Made of solid brass with all moving parts (pins and springs) in stainless steel.

Finishes:

CRL Adjustable Pinnacle 345 Series 135º Glass-to-Glass Hinge


Catalog Number: P1N345CH
Finish: CHROME

Adjustable to Any Angle Up To 90 Degrees Without Removing Door
Available in Several Beautiful Finishes
3 Year Warranty

The CRL Pinnacle Adjustable Series of professional hinges is able to accommodate 5/16 to 1/2 inch (8 to 12 millimeter) tempered safety glass. A variety of two styles, Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Pinnacle Adjustable Series has taken our popular Pinnacle Series to a new level. Adjustment to accommodate the angle desired (up to 90 degrees) is done after the door is installed. Once the door is hung, simply loosen the allen screws and turn the door to the desired closed position. Tighten the Allen screws in the new self-centering location. The door can swing 90 degrees inwards and outwards (adjusting angle from factory set position will reduce 90 degrees swing in that direction). For doors pulling outwards only (using a clear door jamb), you can adjust the hinge to close 5 degrees inside the shower area, thus having the door close snugly against the jamb.

Finishes:

CRL Pinnacle 045 Glass-to-Glass Hinge


Catalog Number: P1N045CH
Finish: CHROME

Self-Centering with Reversible 5 Degree Pivot Pin
Available in Several Beautiful Finishes
Three Year Warranty

The CRL Pinnacle Series of professional hinges is able to accommodate 5/16 to 1/2 inch (8 to 12 millimeter) glass. A variety of six styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Pinnacle Hinges are self-centering, and contain a Reversible 5 Degree Pivot Pin. In addition, Custom Pivot Pins are available to accommodate “off angle” installations.

Finishes:

CRL Vienna Series Glass-to-Glass Mount Hinges


Catalog Number: V1E045CH
Finish: CHROME

Accommodates 3/8″ to 1/2″ (10 to 12 mm) Glass
Available in Many Beautiful Finishes
Three Year Warranty

The CRL Vienna Series of professional hinges is designed to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. Available in both Wall Mount and Glass-to-Glass styles, it provides design flexibility. Vienna Series Hinges are constructed of solid brass with all moving parts (pins and springs) in stainless steel. Two strategically placed pins inside the hinge provide template options, and satisfy two schools of thought for mounting shower door hinges. This allows the Vienna Hinge to be used with it’s own CRL “mouse-ears” cut-out, or in some cases fit competitive “mouse-ears” cut-outs. On the other hand, to enable increased adjustability, the two pins can be removed. This allows the Vienna Hinge to fit it’s own CRL rectangular shape, square cornered cut-out, or in some cases, fit competitive rectangular shaped, square cornered cut-outs. An Optional Custom Pivot pin can be ordered to accommodate off angle installations.

Finishes:

Hydraulic One Way Swing Door Hinge Biloba 8060 Series


Catalog Number: 31M8060CH
Finish: CHROME

A Great Alternative to Floor Closers and Patch Fittings
For Self-Closing Glass Doors From 3/8″ to 1/2″ (10 to 12 mm) Thick
Hold Open at 90 Degrees
Adjustable Closing Speed

Ideal for hermetic closing. Swings one way a full 90 degrees, with stops at 0º and 90º. Closing speed can be adjusted. For doors up to 39 inches (1 meter) wide. Maximum weight per two hinges is 220 pounds (100 kilograms). Minimum order is one each.

Finishes:

Hydraulic One Way Swing Door Hinge Biloba 8060 Series


Catalog Number: 31M8015CH
Finish: CHROME

A Great Alternative to Floor Closers and Patch Fittings
For Self-Closing Glass Doors and Gates from 3/8″ to 1/2″ (10 to 12 mm) Thick
Adjustable Closing Speed

Swings in and out a full 90 degrees, with stops at 0º, +90º, and -90º. Closing speed can be adjusted. For doors up to 39 inches (1 meter) wide. Maximum weight per two hinges is 220 pounds (100 kilograms). Minimum order is one each.
Finishes:

Hydraulic Door Hinge Biloba 8010 Series Wall-to-Glass


Catalog Number: 31M8010CH
Finish: CHROME

A Great Alternative to Floor Closers and Patch Fittings
For Self-Closing Glass Doors and Gates from 3/8″ to 1/2″ (10 to 12 mm) Thick
Adjustable Closing Speed

Swings in and out a full 90 degrees, with stops at 0º, +90º, and -90º. Closing speed can be adjusted. For doors up to 39 inches (1 meter) wide. Maximum weight per two hinges is 220 pounds (100 kilograms). Minimum order is one each.

Finishes:

180º Wall Mount Hinge for 1/4″ Glass

Catalog Number: 3802009
Finish: SILVER

#
Provides the Appearance of a Heavy Glass Unit While You Actually Supply Only 1/4″ (6 mm) Glass

This CRL Frameless Dual Configuration Enclosure Kit has two possible configurations:

Finishes:

CRL Zurich 06 Glass-to-Glass Outswing Hinge


Catalog Number: ZUR06PS
Finish: POLISHED STAINLESS

Ideal for Bi-Fold Application
Available in Several Beautiful Finishes
10 Year Warranty
ZURICH hinges are unavailable for the German market (ZURICH Beschläge sind für den deutschen Markt nicht verfügbar!)

The CRL Zurich Series of professional hinges is able to accommodate 5/16 to 3/8 inch (8 to 10 millimeter) tempered safety glass. A variety of 6 styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. The Zurich Series was C.R.Laurence’s first offering of the popular bi-fold hinges. All six styles of Zurich Hinges feature stainless steel construction and are available in seven finishes. The brass finish is also available in solid brass construction with a protective coating. In addition, screws and washers are interchangeable for a special design accent. Only two holes per attachment are required, with no cut-out necessary.

Finishes:

90º Wall Mount Hinge for 1/4″ Glass

Catalog Number: 3802006
Finish: SILVER

#
Provides Appearance of a Heavy Glass Unit While You Actually Supply Only 1/4″ (6 mm) Glass

This CRL Frameless Dual Configuration Enclosure Kit has two possible configurations:

Finishes:

CRL Slider Kits for 3/8″ Glass 60″ Wide x 72″ High

Catalog Number: S386072BA
Finish: BRITE ANODIZED

#
New and Improved Roller System Provides Smooth Gliding Panels With the Touch of a Finger
#
Bonded Hanger System for Easy Installation
#
# Bolt-Through Hanger System Available on Special Order Custom Units Available

Our new CRL Frameless Double KD Slider Kits provide all the extrusions necessary for installation (header, top hanger rails, bottom track and side jambs), and include a 24 inch (610 millimeter) towel bar, knob, rollers, guide and installation hardware. The glass and silicone sealer are supplied by the installer. The easy to clean bottom track utilizes a center mounted guide. Available in custom sizes, configurations and finishes by contacting CRL Technical Sales.

Finishes:

CRL Zurich 04 Glass-to-Glass Inswing Hinge


Catalog Number: ZUR04PS
Finish: POLISHED STAINLESS

Ideal for Bi-Fold Application
Available in Several Beautiful Finishes
10 Year Warranty
ZURICH hinges are unavailable for the German market (ZURICH Beschläge sind für den deutschen Markt nicht verfügbar!)

The CRL Zurich Series of professional hinges is able to accommodate 5/16 to 3/8 inch (8 to 10 millimeter) tempered safety glass. A variety of six styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. The Zurich Series was C.R.Laurence’s first offering of the popular bi-fold hinges. All six styles of Zurich Hinges feature stainless steel construction and are available in six finishes. The brass finish is also available in solid brass construction with a protective coating. In addition, screws and washers are interchangeable for a special design accent. Only two holes per attachment are required, with no cut-out necessary.

Finishes:

CRL Slider Kits for 3/8″ Glass 60″ Wide x 60″ High

Catalog Number: S386060BA
Finish: BRITE ANODIZED

#
New and Improved Roller System Provides Smooth Gliding Panels With the Touch of a Finger
#
Bonded Hanger System for Easy Installation
#
# Bolt-Through Hanger System Available on Special Order Custom Units Available

Our new CRL Frameless Double Door KD Slider Kits provide all the extrusions necessary for installation (header, top hanger rails, bottom track and side jambs), and also include a 24 inch (610 millimeter) towel bar, knob, guide, rollers and installation hardware. The easy to clean bottom track utilizes a center mounted guide. Available in custom sizes, configurations and finishes by contacting CRL Technical Sales.

Finishes:

CRL Sydney Series Adjustable Hinges


Catalog Number: SYD180BS
Finish: BRUSHED STAINLESS

Our Spider Type Design for the Construction of Frameless Showers
Glass-to-Glass Model Has Settings at 90, 135 or 180 Degrees
Choice of Two Mounting Options: Glass-to-Glass and Glass-to-Wall
Constructed of 316 Stainless Steel in Your Choice of Brushed or Polished Finishes

For a new design in Frameless Shower Door Hinges, look no further than our Sydney Series. The unique “Spider Type” design is certain to give the frameless shower door a different look that will surely be noticed. Constructed of durable 316 stainless steel, Sydney Hinges are available in Wall-to- Glass and Glass-to-Glass models. The Glass-to-Glass model offers three settings at 90, 135, and 180 degrees. For doors falling in between these common installation angles, the springs may be removed to allow a “free-swinging” hinge. Two holes are required per hinge for each panel to accommodate the through-bolts, with no cut- cut necessary. The 316 stainless steel body of the Sydney Hinge allows the door to swing 90 degrees outward. Polished Stainless Steel and Brushed Stainless Steel finishes are offered.

Finishes:

CRL Slider Kits for 1/4″ Glass 60″ Wide x 72″ High

Catalog Number: S146072BA
Finish: BRITE ANODIZED

#
New and Improved Roller System Provides Smooth Gliding Panels With the Touch of a Finger
#
Bonded Hanger System for Easy Installation
#
# Bolt-Through Hanger System Available on Special Order Custom Units Available

Our new CRL Frameless Double “MK” Series Slider Kits provide all the extrusions necessary for installation (header, top hanger rails, bottom track and side jambs), and include a 24 inch (610 millimeter) towel bar, knob, rollers, guide and installation hardware. The glass and silicone sealer are supplied by the installer. The easy to clean bottom track utilizes a center mounted guide. Available in custom sizes, configurations and finishes by contacting CRL Technical Sales.

Finishes:

CRL Cicero 90º Glass-to-Glass Hinge


Catalog Number: 3803042
Finish: CHROME

For 3/8″ and 1/2″ (10 and 12 mm) Tempered Glass
Solid Forged Brass Hinges With Square Corners & Edges
Available in Several Finishes

The CRL Cicero Series Shower Door Hinge features precision machined stainless steel components with mouse ear design for added holding strength. The Cicero Series has the same timeless styling as the Anaheim hinge, but with clean, rounded corners and beveled edges. It is self closing from 25 degrees to self centering 0 degree return. (5 degree positive closure and 45 degree configurations available) An allen wrench is included with each hinge. This series hinge conservatively rated at 40 pounds per hinge.

Finishes:

CRL Slider Kits for 1/4″ Glass 60″ Wide x 60″ High

Catalog Number: S146060BA
Finish: BRITE ANODIZED

#
New and Improved Roller System Provides Smooth Gliding Panels With the Touch of a Finger
#
Bonded Hanger System for Easy Installation
#
# Bolt-Through Hanger System Available on Special Order Custom Units Available

Our new CRL Frameless Double KD Slider Kits provide all the extrusions necessary for installation (header, top hanger rails, bottom track and side jambs), and include a 24 inch (610 millimeter) towel bar, knob, rollers, guide and installation hardware. The glass and silicone sealer are supplied by the installer. The easy to clean bottom track utilizes a center mounted guide. Available in custom sizes, configurations and finishes by contacting CRL Technical Sales.

Finishes:

CRL Arctic Series Adjustable Hinges


Catalog Number: ARC180BS
Finish: BRUSHED STAINLESS

Our Most Unique Design for the Construction of Frameless Showers
Set Doors at 90, 135, or 180 Degrees, or Anywhere In-Between
Constructed of Stainless Steel in Your Choice of Brushed or Polished Finishes
Fits 5/16″ (8 mm) and 3/8″ (10 mm) Thick Glass (Holes Required)
ARCTIC hinges are not available in Europe

This CRL Arctic Series Hinge is constructed of stainless steel, and is available in Glass-to-Glass and Glass-to-Wall models. Both are intended for use with 5/16 and 3/8 inch (8 and 10 millimeter) tempered safety glass. Neither requires that the glass be notched, only that each glass panel have two 1/2 inch (12 millimeter) holes drilled for the through-bolts. The body of the Arctic Hinge is all stainless steel with a pivot point that swings a full 180 degrees. Arctic gives you the option to set doors at 90, 135, or 180 degrees, or anywhere in-between. That’s a feature most other hinges can’t offer. If you’re looking for something new in frameless hinges, try the Arctic Series.

Finishes:

CRL Hardware Pack for Cottage Series Sliding Shower Kits

Catalog Number: DK68B

#
Designed for 3/8″ (10 mm) glass
#
Available in Brite Anodized/Brushed Nickel, Brite Gold Anodized, and Oil Rubbed Bronze Finishes

This CRL Hardware Package for Cottage Series Sliding Shower Kits is available in matching finishes. It includes: Screws, Bumpers and Plastic anchors.
Finishes:

CRL Anaheim 90º Glass-to-Glass Hinge


Catalog Number: 3800132
Finish: CHROME

For 3/8″ and 1/2″ (10 and 12 mm) Tempered Glass
Solid Forged Brass Hinges With Square Corners & Edges
Available in Several Finishes

The CRL Anaheim Series Shower Door Hinge features precision machined stainless steel components with mouse ear design for added holding strength. The versatile, adaptable styling of this hinge will compliment a traditional as well as a contemporary shower installation. This graceful simple design, besides being very functional, is also timeless. It is self closing from 25 degrees to self centering 0 degree return. (5 degree positive closure and 45 degree configurations available) An allen wrench is included with each hinge. This series hinge conservatively rated at 40 pounds per hinge.

Finishes:

CRL Berlin Series Glass-to-Glass Mount Hinges


Catalog Number: BER090CH
Finish: CHROME

Rounded Design Ideal for “Soft Decors”
Available in Several Beautiful Finishes
3 Year Warranty

The Berlin Series of professional hinges is able to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) tempered safety glass. A variety of 4 styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Berlin Series of Hinges combines elegant design with superb quality. This family of hinges features a Wall Mount Hinge with Offset Back Plate, which leaves the mounting plate visible only from inside the shower. Three Glass-to-Glass models round out the selection. Choose from several beautiful finishes which will match the decor of most bathrooms. Berlin Hinges are constructed of solid brass, and will provide a new inspiration combined with a classic past.

Finishes:

CRL Junior Cathedral Series Glass-to-Glass Mount Hinges


Catalog Number: JRCAT090CH
Finish: CHROME/GOLD

Self-Centering with Reversible 5 Degree Pivot Pin
Available in Several Beautiful Two-Tone Finishes
3 Year Warranty

CRL Junior Cathedral Series of professional hinges are able to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) glass. A variety of four styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. The Junior Cathedral Series Hinge blends a unique two-tone design with the same internal mechanism as our Junior Geneva Hinge. The Junior Cathedral has a positive hold on the glass, utilizing a cut-out plus a hole to prevent door slippage. Constructed of solid brass, they come in one Wall Mount and three Glass-to-Glass styles. They contain a Reversible Pivot Pin for optional 5 degree offset door closure. The Junior Cathedral is self-centering, and is available in several color blends.

Finishes:

CRL Monaco Series Glass-to-Glass Mount Hinges


Catalog Number: M0N090CH
Finish: CHROME

Precise Closing Feature to Zero Degrees
Available in Several Beautiful Finishes
3 Year Warranty

The CRL Monaco Series introduces charm, richness and character to the choice of frameless shower door hinges using 1/4 to 5/16 inch (6 to 8 millimeter) safety glass. Available in two wall mount and four glass-to-glass styles, Monaco Hinges present numerous design and configuration options. Aesthetically pleasing beveled edges and corners give Monaco Hinges the look many architects and designers desire. Several standard finishes are stocked.

Finishes:

CRL Bottom Guides for Cottage Series Sliding Shower Doors

Catalog Number: DK6914

#
Designed for 1/4″ (6 mm) Glass

CRL Bottom Guide for CK/DK Cottage Series Sliders components add versatility to our Frameless Sliding Shower Door Kits, and allows you the option of adding additional panels to create a designer enclosure, or simply construct your own sliding unit by combining the various parts. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

CRL Petite Series Glass-to-Glass Mount Hinges


Catalog Number: PET090CH
Finish: CHROME

Precise Closing Feature to Zero Degrees
Available in Several Beautiful Finishes
3 Year Warranty

The CRL Petite Series of professional hinges is able to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) tempered safety glass. A variety of three styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Petite Series provides a complete spectrum of hinges for frameless shower doors using 1/4 to 5/16 inch (6 to 8 millimeter) safety glass. Developed to allow virtually every application configuration, Petite Series Hinges deliver design freedom. Petite Hinges have mitered edges with curved corners to provide an aesthetically pleasing look. Petite Hinges have 25% thicker plates than competitive hinges, thereby reducing deflection and providing greater holding power.
Finishes:

CRL Wall Jamb for CK/DK Cottage/EK Suite Series Sliders

Catalog Number: DK7080BA
Finish: BRITE ANODIZED

#
Simply Field Fabricate As Desired
#
Jamb Can Be Cut at a Taper to Fill Vertical Gap When Glass Should Have Been Cut Out of Square But Was Not

CRL Tapered Wall Jambs for CK/DK Cottage and EK Suite Series Sliders add versatility to our Frameless Sliding Shower Door Kits. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

CRL Milano Series Glass-to-Glass Mount Hinges


Catalog Number: M1L090CH
Finish: CHROME

Precise Closing Feature to Zero Degrees
Available in Several Beautiful Finishes
Three Year Warranty

The CRL Milano Series of professional hinges is able to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) tempered safety glass. A variety of three styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The traditionally designed Milano Series of Hinges are constructed of solid brass material for reliable and durable performance. The closing action of the Milano allows the door precise closing to zero degrees. Two Wall Mount styles and one Glass-to-Glass style provide design flexibility. The Milano Series offers five elegant finishes from which to choose. Accommodates 1/4 to 5/16 inch (6 to 8 millimeter) thick glass.

Finishes:

CRL Custom Tapered Wall Jamb for CK/DK Cottage/EK Suite Series Sliders

Catalog Number: DK70BA
Finish: BRITE ANODIZED

#
Individual Supplementary Extrusions and Hardware Components to Convert Our Frameless Shower Door Kits Into Angled Enclosures or Wider Inline Units
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Tapered Wall Jambs for CK/DK Cottage and EK Suite Series Sliders add versatility to our Frameless Sliding Shower Door Kits. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

CRL Sill Adaptor for CK/DK Cottage/EK Suite Series Sliders

Catalog Number: DK71720RB
Finish: OIL RUBBED BRONZE

#
Simply Field Fabricate As Desired
#
Bottom Sill Spacer Can Be Cut at a Taper to Bring the Bottom Sill to a Level Position

CRL Tapered Sill Adapter for CK/DK Cottage and EK Suite Series Sliders add versatility to our Frameless Sliding Shower Door Kits. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

CRL Trianon Series Glass-to-Glass Mount Hinges


Catalog Number: TR1092CH
Finish: CHROME

Self-Centering with Reversible 5 Degree Pivot Pin
Available in Several Beautiful Finishes
3 Year Warranty

The CRL Trianon 092 Series of professional hinges is able to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) glass. A variety of five styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. Trianon Hinges can be used to support glass in swinging door installations. They feature radiused corners and beveled edges in several decorator finishes. Trianon Hinges are constructed of solid brass with a self-centering mechanism for door alignment when within 15 degree of the center. They contain a Reversible Pivot Pin for optional 5 degree offset door closure. Five distinct models include two Wall Mount styles, along with three Glass-to-Glass styles.

Finishes:

CRL Custom Tapered Sill Adaptor for CK/DK Cottage/EK Suite Series Sliders

Catalog Number: DK71BA
Finish: BRITE ANODIZED

#
Individual Supplementary Extrusions and Hardware Components to Convert Our Frameless Shower Door Kits Into Angled Enclosures or Wider Inline Units
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Tapered Sill Adapter for CK/DK Cottage and EK Suite Series Sliders add versatility to our Frameless Sliding Shower Door Kits. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

CRL Junior Geneva Series Glass-to-Glass Mount Hinges


Catalog Number: JRG092CH
Finish: CHROME

Self-Centering with Reversible 5 Degree Pivot Pin
Available in Several Beautiful Finishes
Three Year Warranty

CRL Junior Geneva Series of professional hinges are able to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) glass. A variety of six styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. The same elegant European design that has made our Geneva Series so popular is available in a smaller version, the Junior Geneva, to offer additional application opportunities. Used to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) thick glass, the Junior Geneva is made of solid brass. There are three Wall Mount styles along with 90, 135 and 180 Degrees Glass-to-Glass styles. The Junior Geneva is self-centering and available in seven popular finishes. They contain a Reversible Pivot Pin for optional 5 degree offset door closure.

Finishes:

CRL Grande Series Glass-to-Glass Mount Hinges


Catalog Number: GRA090CH
Finish: CHROME

Can be Side Mounted at Top and Bottom
Available in Several Beautiful Finishes
3 Year Warranty

Our CRL Grande Series of professional hinges are able to accommodate 5/16 to 3/8 inch (8 to 10 millimeter) tempered safety glass. A variety of five styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Grande Hinge incorporates a larger mounting surface to provide superior support for frameless shower doors. The beveled edges are an attractive accent to Grande’s strong rectangular design, and the Offset Back Plate Wall Mount Model gives a clean exterior appearance. Grande Hinges can be mounted on the top and bottom corners of the door, or anywhere in-between. Grande is constructed of solid brass for years of reliable service.

Finishes:

CRL Classique Series Glass-to-Glass Mount Hinges


Catalog Number: CLA090CH
Finish: CHROME

Features Round Design and Beveled Edges
Available in Several Beautiful Finishes
3 Year Warranty

The Classique Series of professional hinges is able to accommodate 5/16 to 3/8 inch (8 to 10 millimeter) tempered safety glass. A variety of 5 styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Classique Shower Door Hinge is a design apart from traditional hinges. Beautiful round design and beveled edges are the result of an artist’s unique concept of the perfect hinge for decors with strong curved and contoured influences.
Finishes:

CRL EK Series Outside Top Hanger Bracket

Catalog Number: EK670BA
Finish: BRITE ANODIZED

#
Several Architectural Finishes Available
#
Component to “EK” Series Shower Kits

This CRL Outside or Exterior Side Top Hanger Bracket is used with the EK Series Slider Kit. Works in conjunction with Interior Top Hangers Cat. No. EK671.

Finishes:

CRL EK Series Inside Top Hanger Bracket

Catalog Number: EK671BA
Finish: BRITE ANODIZED

#
Several Architectural Finishes Available
#
Component Item to The “EK” Series Shower Sliders

This CRL Inside or Interior Side Top Hanger Bracket is used with EK Series Slider Kit. Works in conjunction with Exterior Top Hangers cat. No. EK670.

Finishes:

CRL 121″ Header for Suite “EK” Series Sliders

Catalog Number: EK61121BA
Finish: BRITE ANODIZED

#
Several Designer Finishes Available
#
For 1/4″ (6 mm) Glass
#
Low profile 2-1/4″ (57 mm) Header is Reversible So You Can Expose Either the Curved or Flat Side

CRL component items for our new “EK” Suite Series Frameless Sliding Shower Doors are ideal for use as replacement parts, or for units you wish to fabricate yourself. Stock lengths of the Extrusions, individual Towel Bars, Knobs, and accessory hardware provide all of the options you need to build your own inline enclosures for 1/4 inch (6 millimeter) glass. You can also send our Technical Sales Shower Door Department a drawing of the enclosure. They will be happy to quote a custom unit.

Finishes:

CRL 61″ Header for Suite “EK” Series Sliders

Catalog Number: EK61BA
Finish: BRITE ANODIZED

#
Several Designer Finishes Available
#
For 1/4″ (6 mm) Glass
#
Low profile 2-9/16″ (65 mm) Header is Reversible So You Can Expose Either the Curved or Flat Side

CRL component items for our new “EK” Suite Series Frameless Sliding Shower Doors are ideal for use as replacement parts, or for units you wish to fabricate yourself. Stock lengths of the Extrusions, individual Towel Bars, Knobs, and accessory hardware provide all of the options you need to build your own inline enclosures for 1/4 inch (6 millimeter) glass. You can also send our Technical Sales Shower Door Department a drawing of the enclosure. They will be happy to quote a custom unit.

Finishes:

CRL 98″ T-Seal Polycarbonate

Catalog Number: DK98T

#
Vinyl Seals Used Glass-to-Glass or Glass-to-Wall

Polycarbonates Seals adhere to the glass or wall using our Clear Very Hi-Bond Tape.

Finishes:

CRL 98″ L-Seal Polycarbonate

Catalog Number: DK98L

#
This is a Frameless Sliding Shower Enclosure Component
#
Vinyl Seals Used Glass-to-Glass or Glass-to-Wall

Polycarbonates Seals adhere to the glass or wall using our Clear Very Hi-Bond Tape.

Finishes:

CRL Cathedral Series Glass-to-Glass Mount Hinges


Catalog Number: CAT090CH
Finish: CHROME

Unique Two-Tone Design
Available in Several Beautiful Finishes
3 Year Warranty

The CRL Cathedral Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) thick tempered safety glass. A variety of 4 styles, Wall Mount and Glass-to-Glass types, gives design flexibility. The Cathedral Series Hinge combines a unique two-tone accent design with a positive hold cut-out and through-stud system. The Cathedral Series offers the same internal mechanism as our popular Geneva Series and contains a Reversible Pivot Pin for optional 5 degree offset door closure. A Custom Pivot Pin is available for “off-angle” installations.
Finishes:

CRL Top Hanger Bracket for 1/2″

Catalog Number: DK67BA
Finish: BRITE ANODIZED

#
Roller Bracket Assembly Used in Cottage Series Applications for 1/4″ (6 mm) Glass
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Top Hanger for CK/DK Cottage Series Sliders components add versatility to our Frameless Sliding Shower Door Kits, and allows you the option of adding additional panels to create a designer enclosure, or simply construct your own sliding unit by combining the various parts. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

CRL Top Hanger Bracket for 3/8″

Catalog Number: DK66BA
Finish: BRITE ANODIZED

#
Roller Bracket Assembly Used in Cottage Series Applications for 3/8″ (10 mm) Glass
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Top Hanger for CK/DK Cottage Series Sliders components add versatility to our Frameless Sliding Shower Door Kits, and allows you the option of adding additional panels to create a designer enclosure, or simply construct your own sliding unit by combining the various parts. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

CRL Estate Series Glass-to-Glass Mount Hinges


Catalog Number: EST090CH
Finish: CHROME

Self-Centering Action
Available in Several Beautiful Finishes
3 Year Warranty

The CRL Estate Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) tempered safety glass. A variety of four styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. These beautifully finished, solid brass forged Estate Hinges make it possible to mount 3/8 to 1/2 inch (10 to 12 millimeter) thick shower doors without surrounding frames, so the door has an almost “floating” appearance. The Estate Hinges heavy-duty stainless steel springs allow the door to swing 90 degrees inwards and outwards. A friction cam allows the door to be firmly maintained in any position, except when within 15 degrees of the closed position, where it is tapered to assist in centering the door.
Finishes:

CRL Concord Series Glass-to-Glass Mount Hinges


Catalog Number: SDH090CH
Finish: CHROME

Self-Centering Action
Available in Many Beautiful Finishes
3 Year Warranty

The CRL Concord Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) tempered safety glass. A variety of four styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. These beautifully finished, solid brass forged Concord Hinges make it possible to mount 3/8 to 1/2 inch (10 to 12 millimeter) thick shower doors without surrounding frames, so the door has an almost “floating” appearance. The Concords heavy-duty stainless steel springs allow the door to swing 90 degrees inwards and outwards. A friction cam allows the door to be firmly maintained in any position, except when within 15 degrees of the closed position, where it is tapered to assist in centering the door.

Finishes:

CRL 80″ Side Jamb

Catalog Number: DK65BA
Finish: BRITE ANODIZED

#
Side Jamb is Used Against the Vertical Wall in “DK” Series Slider Applications
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Side Jamb for CK/DK Cottage Series Sliders components add versatility to our Frameless Sliding Shower Door Kits, and allows you the option of adding additional panels to create a designer enclosure, or simply construct your own sliding unit by combining the various parts. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

CRL Roman Series Glass-to-Glass Mount Hinges


Catalog Number: R0M092CH
Finish: CHROME

New Model Eliminates Small End Plate Covering Hinge on Edge of Fixed Panel
Requires Holes in Fixed Panel and Cut-Out in Door
Three Year Warranty

The CRL Roman 092 Series 90 Degrees Glass-to-Glass Hinges are able to accommodate 5/16 to 1/2 inch (8 to 12 millimeter) glass. This new style requires only two holes (per hinge) in the fixed panel, and a cut-out in the door. This new Roman style hinge eliminates the necessity of a small end plate, leaving a more aesthetic, uninterrupted glass edge for the fixed panel.
Finishes:

CRL 144″ Shower Side Jamb

Catalog Number: DK65144BA
Finish: BRITE ANODIZED

#
Side Jamb is Used Against the Vertical Wall in “DK” Series Slider Applications
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Side Jamb for CK/DK Cottage Series Sliders components add versatility to our Frameless Sliding Shower Door Kits, and allows you the option of adding additional panels to create a designer enclosure, or simply construct your own sliding unit by combining the various parts. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

CRL 72″ Sidelite Sill

Catalog Number: DK64BA
Finish: BRITE ANODIZED

#
Sidelite Sill Used in Cottage Series Applications Where Fixed Panel is Same Height as Doors
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Sidelite Sill for CK/DK Cottage Series Sliders components add versatility to our Frameless Sliding Shower Door Kits, and allows you the option of adding additional panels to create a designer enclosure, or simply construct your own sliding unit by combining the various parts. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

CRL 144″ Shower Sidelite Sill

Catalog Number: DK64144BA
Finish: BRITE ANODIZED

#
Sidelite Sill Used in Cottage Series Applications Where Fixed Panel is Same Height as Doors
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Sidelite Sill for CK/DK Cottage Series Sliders components add versatility to our Frameless Sliding Shower Door Kits, and allows you the option of adding additional panels to create a designer enclosure, or simply construct your own sliding unit by combining the various parts. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

CRL Cologne Series Glass-to-Glass Mount Hinges

Catalog Number: C0L092CH
Finish: CHROME

Accommodates 3/8″ to 1/2″ (10 to 12 mm) Glass
Available in Many Beautiful Finishes

Three Year Warranty

The CRL Cologne Series of professional hinges is designed to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. Available in both Wall Mount and Glass-to-Glass styles, it provides design flexibility. Cologne Series Hinges are constructed of solid brass with all moving parts (pins and springs) in stainless steel. Two strategically placed pins inside the hinge provide template options, and satisfy two schools of thought for mounting shower door hinges. It allows the Cologne Hinge to be used with it’s own CRL “mouse-ears”
cut-out, or in some cases fit competitive “mouse-ear” cut-outs. On the other hand, to enable increased adjustability, the two pins can be removed which allows the Vienna Hinge to fit it’s own CRL rectangular shape, square cornered cut-out, or in some cases, fit competitive rectangular shaped, square cornered cut-outs.
Finishes:

CRL 72″ Bottom Sill


Catalog Number: DK63BA
Finish: BRITE ANODIZED

#
# Individual Supplementary Extrusions and Hardware Components to Convert Our Frameless Shower Door Kits Into Angled Enclosures or Wider Inline Units Bottom Sill Extrusion Used in All Cottage Series Applications
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Bottom Sill for CK/DK Cottage Series Sliders components add versatility to our Frameless Sliding Shower Door Kits, and allows you the option of adding additional panels to create a designer enclosure, or simply construct your own sliding unit by combining the various parts. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

CRL 144″ Shower Bottom Sill

Catalog Number: DK63144BA
Finish: BRITE ANODIZED

#
# Individual Supplementary Extrusions and Hardware Components to Convert Our Frameless Shower Door Kits Into Angled Enclosures or Wider Inline Units Bottom Sill Extrusion Used in All Cottage Series Applications
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Bottom Sill for CK/DK Cottage Series Sliders components add versatility to our Frameless Sliding Shower Door Kits, and allows you the option of adding additional panels to create a designer enclosure, or simply construct your own sliding unit by combining the various parts. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

CRL Vienna Series Glass-to-Glass Mount Hinges


Catalog Number: V1E092CH
Finish: CHROME

Accommodates 3/8″ to 1/2″ (10 to 12 mm) Glass
Available in Many Beautiful Finishes
Three Year Warranty

The CRL Vienna Series of professional hinges is designed to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. Available in both Wall Mount and Glass-to-Glass styles, it provides design flexibility. Vienna Series Hinges are constructed of solid brass with all moving parts (pins and springs) in stainless steel. Two strategically placed pins inside the hinge provide template options, and satisfy two schools of thought for mounting shower door hinges. This allows the Vienna Hinge to be used with it’s own CRL “mouse-ears” cut-out, or in some cases fit competitive “mouse-ears” cut-outs. On the other hand, to enable increased adjustability, the two pins can be removed. This allows the Vienna Hinge to fit it’s own CRL rectangular shape, square cornered cut-out, or in some cases, fit competitive rectangular shaped, square cornered cut-outs. An Optional Custom Pivot pin can be ordered to accommodate off angle installations.
Finishes:

CRL Pinnacle Series Glass-to-Glass Mount Hinges


Catalog Number: P1N092CH
Finish: CHROME

New Model Eliminates Small End Plate Covering Hinge on Edge of Fixed Panel
Requires Holes in Fixed Panel and Cut-Out in Door
3 Year Warranty

The new style CRL Pinnacle 092 Series 90 Degrees Glass-to-Glass Hinge replaces the old style Pinnacle 090 Series 90 Degrees Glass-to-Glass Hinge which required a cut-out in both the door and the fixed panel. This new style requires only two holes (per hinge) in the fixed panel, and a cut-out in the door.

Finishes:

CRL Geneva Series Glass-to-Glass Mount Hinges


Catalog Number: GEN092CH
Finish: CHROME

New Model Eliminates Small End Plate Covering Hinge on Edge of Fixed Panel
Requires Holes in Fixed Panel and Cut-Out in Door
3 Year Warranty

The CRL Geneva 092 Series 90 Degrees Glass-to-Glass Hinges replace the old style Geneva 090 Series 90 Degrees Glass-to-Glass Hinge which required a cut-out in both the door and the fixed panel. This new style requires only two holes (per hinge) in the fixed panel, and a cut-out in the door.

Finishes:

CRL Sausalito Wall Mount Short Back Plate Hinge


Catalog Number: 3800162
Finish: CHROME

For 3/8″ & 1/2″ (10 & 12 mm) Tempered Glass
Solid Forged Brass Construction
Available in Several Finishes

The CRL Sausalito Series Shower Door Hinge features precision machined stainless steel components with dual precision wound stainless steel return springs. The sleek clean lines of these oversized, forged solid brass hinges will add an optimal sense of style to any contemporary installation. The large surface area provides superior support for glass mounting. It is self closing from 25 degrees to self centering 0 degree return. (5 degree positive closure and 45 degree configurations available) Matched finish stainless steel Allen style clamp screws with an Allen wrench is included. Wall mount hinges include matched finish stainless steel mounting screws. Conservatively rated at 50 pounds per hinge.

Finishes:

CRL Anaheim Wall Mount Short Back Plate Hinge


Catalog Number: 3800122
Finish: CHROME

For 3/8″ & 1/2″ (10 & 12 mm) Tempered Glass
Solid Forged Brass Hinges With Square Corners & Edges
Available in Several Finishes

The CRL Anaheim Series Shower Door Hinge features precision machined stainless steel components with mouse ear design for added holding strength. The versatile, adaptable styling of this hinge will compliment a traditional as well as a contemporary shower installation. This graceful simple design, besides being very functional, is also timeless. It is self closing from 25 degrees to self centering 0 degree return. (5 degree positive closure and 45 degree configurations available) An allen wrench is included with each hinge. This series hinge conservatively rated at 40 pounds per hinge.

Finishes:

CRL 72″ Header Filler

Catalog Number: DK62BA
Finish: BRITE ANODIZED

#
# Individual Supplementary Extrusions and Hardware Components to Convert Our Frameless Shower Door Kits Into Angled Enclosures or Wider Inline Units Header Filler Used Where Fixed Panels are Located
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Header Filler for CK/DK Cottage Series Sliders components add versatility to our Frameless Sliding Shower Door Kits, and allows you the option of adding additional panels to create a designer enclosure, or simply construct your own sliding unit by combining the various parts. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

CRL Vienna 074 Wall Mount Short Back Plate Hinge


Catalog Number: V1E074CH
Finish: CHROME

Accommodates 3/8″ to 1/2″ (10 to 12 mm) Glass
Available in Several Beautiful Finishes
Three Year Warranty

The CRL Vienna Series of professional hinges is designed to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. Available in both Wall Mount and Glass-to-Glass styles, it provides design flexibility. Vienna Series Hinges are constructed of solid brass with all moving parts (pins and springs) in stainless steel. Two strategically placed pins inside the hinge provide template options, and satisfy two schools of thought for mounting shower door hinges. It allows the Vienna Hinge to be used with it’s own CRL “mouse-ears” cut-out, or in some cases fit competitive “mouse-ear” cut-outs. On the other hand, to enable increased adjustability, the two pins can be removed which allows the Vienna Hinge to fit it’s own CRL rectangular shape, square cornered cut-out, or in some cases, fit competitive rectangular shaped, square cornered cut-outs. An Optional Custom Pivot pin can be ordered to accommodate off angle installations.

Finishes:

CRL 144″ Shower Header Filler


Catalog Number: DK62144BA
Finish: BRITE ANODIZED

#
# Components to Convert Our Frameless Shower Door Kits Into Angled Enclosures or Wider Inline Units Header Filler Used Where Fixed Panels are Located
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Header Filler for CK/DK Cottage Series Sliders components add versatility to our Frameless Sliding Shower Door Kits, and allows you the option of adding additional panels to create a designer enclosure, or simply construct your own sliding unit by combining the various parts. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

CRL 72″ Shower Header

Catalog Number: DK61BA
Finish: BRITE ANODIZED

#
# Individual Supplementary Extrusions and Hardware Components to Convert Our Frameless Shower Door Kits Into Angled Enclosures or Wider Inline Units Top Header Extrusion Acts as a Crown, and is Used in All Cottage Series Applications
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Header for CK/DK Cottage Series Sliders components add versatility to our Frameless Sliding Shower Door Kits, and allows you the option of adding additional panels to create a designer enclosure, or simply construct your own sliding unit by combining the various parts. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

CRL Pinnacle 574 5º Pre-Set Wall Mount Short Back Plate Hinge


Catalog Number: P1N574CH
Finish: CHROME

Factory Set For 5 Degree Offset Closure into Shower Interior
Available in Several Beautiful Finishes
3 Year Warranty

The CRL Pinnacle Series of professional hinges is able to accommodate 5/16 to 1/2 inch (8 to 12 millimeter) glass. A variety of six styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Pinnacle Hinges are self-centering, and contain a Reversible 5 Degree Pivot Pin. In addition, Custom Pivot Pins are available to accommodate “off angle” installations.

Finishes:

CRL 144″ Shower Header

Catalog Number: DK61144BA
Finish: BRITE ANODIZED

#
Individual Supplementary Extrusions and Hardware Components to Convert Our Frameless Shower Door Kits Into Angled Enclosures or Wider Inline Units
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Header for CK/DK Cottage Series Sliders components add versatility to our Frameless Sliding Shower Door Kits, and allows you the option of adding additional panels to create a designer enclosure, or simply construct your own sliding unit by combining the various parts. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

CRL Pinnacle 074 Short Back Plate Hinge


Catalog Number: P1N074CH
Finish: CHROME

Factory Set for Standard Closing Position
Available in Several Beautiful Finishes
3 Year Warranty

The CRL Pinnacle Series of professional hinges is able to accommodate 5/16 to 1/2 inch (8 to 12 millimeter) glass. A variety of six styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Pinnacle Hinges are self-centering, and contain a Reversible 5 Degree Pivot Pin. In addition, Custom Pivot Pins are available to accommodate “off angle” installations.

Finishes:

CRL Geneva 574 5º Pre-Set Wall Mount Short Back Plate Hinge


Catalog Number: GEN574CH
Finish: CHROME

Self-Centering with Reversible 5 Degree Pivot Pin
Available in Several Beautiful Finishes
3 Year Warranty

The Geneva Series of professional hinges is able to accommodate 5/16 to 1/2 inch (8 to 12 millimeter) glass. A variety of six styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. The cut-out with the short Back Plate allows glass to be closer to the wall. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Geneva Hinges are self-centering, and contain a Reversible 5 Degree Pivot Pin. In addition, Custom Pivot Pins are available to accommodate “off angle” installations.
Finishes:

CRL Geneva 074 Wall Mount Short Back Plate Hinge


Catalog Number: GEN074CH
Finish: CHROME

Self-Centering with Reversible 5 Degree Pivot Pin
Available in Several Beautiful Finishes
Three Year Warranty

The CRL Geneva Series of professional hinges is able to accommodate 5/16 to 1/2 inch (8 to 12 millimeter) glass. A variety of six styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. The cut-out with the short Back Plate allows glass to be closer to the wall. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Geneva Hinges are self-centering, and contain a Reversible 5 Degree Pivot Pin. In addition, Custom Pivot Pins are available to accommodate “off angle” installations.

Finishes:

CRL International Beveled Edge Wall Mount Hinges


Catalog Number: BWM1BN
Finish: BRUSHED NICKEL

Reliable Performance at a Value Price

Our NEW International Series Hinge blends value with performance. Offered in both traditional square cornered style, or with modern beveled edges,the International Series Hinge provides design flexibility. Wall Mount with Full Back Plate and 180 Degree Glass-to-Glass Models cover the majority of popular installation configurations. The solid brass constructed International Series Hinge will accommodate 5/16″ (8 mm), 3/8″ (10 mm), and 1/2″ (12 mm) thick tempered glass. Stocked in popular polished chrome and brushed nickel finishes.

Finishes:

CRL International Square Corner Wall Mount Hinges


Catalog Number: SWM1BN
Finish: BRUSHED NICKEL

Reliable Performance at a Value Price

Our NEW International Series Hinge blends value with performance. Offered in both traditional square cornered style, or with modern beveled edges,the International Series Hinge provides design flexibility. Wall Mount with Full Back Plate and 180 Degree Glass-to-Glass Models cover the majority of popular installation configurations. The solid brass constructed International Series Hinge will accommodate 5/16″ (8 mm), 3/8″ (10 mm), and 1/2″ (12 mm) thick tempered glass. Stocked in popular polished chrome and brushed nickel finishes.

Finishes:

CRL Prima Series L-Bracket Wall Mount Hinges


Catalog Number: PPH03CH
Finish: CHROME

Self-Centering with Optional 5 Degree Pivot Pin Set
Available in Many Beautiful Finishes
3 Year Warranty
U.S. Patent 5297313

The CRL Prima Series of professional hinges is able to accommodate 5/16 to 3/8 inch (8 to 10 millimeter) tempered safety glass. A variety of four styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Prima Hinges are self-centering, with four springs for maximum retention strength. Optional 5 Degree Pivot Pin Sets are available to accommodate “off angle” installations. Some advantages of pivot type hinges include the fact that they carry the majority of the weight on the bottom, and have the ability to be inset from the wall, enabling clearance for towel bars and other projections. The Prima Series is adaptable to CRL’s Deluxe Header System for shower enclosures not extending to full ceiling height.
Finishes:

CRL Cicero Wall Mount “H” Full Back Plate Hinge


Catalog Number: 3803001
Finish: BRASS

For 3/8″ and 1/2″ (10 and 12 mm) Tempered Glass
Solid Forged Brass Hinges With Square Corners & Edges
Available in Several Finishes

The CRL Cicero Series Shower Door Hinge features precision machined stainless steel components with mouse ear design for added holding strength. The Cicero Series has the same timeless styling as the Anaheim hinge, but with clean, rounded corners and beveled edges. It is self closing from 25 degrees to self centering 0 degree return. (5 degree positive closure and 45 degree configurations available) An allen wrench is included with each hinge. This series hinge conservatively rated at 40 pounds per hinge.

Finishes:

CRL Petite 045 Wall Mount 45º Inside Plane Hinge


Catalog Number: PET045CH
Finish: CHROME

Precise Closing Feature to Zero Degrees
Available in Several Beautiful Finishes
Three Year Warranty

The CRL Petite Series of professional hinges is able to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) tempered safety glass. The Petite 045 Series is designed to be able to mount a door on a wall that runs at a 45 degree inside plane. A variety of three styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Petite Series provides a complete spectrum of hinges for frameless shower doors using 1/4 to 5/16 inch (6 to 8 millimeter) safety glass. Developed to allow virtually every application configuration, Petite Series Hinges deliver design freedom. Petite Hinges have mitered edges with curved corners to provide an aesthetically pleasing look. Petite Hinges have 25% thicker plates than competitive hinges, thereby reducing deflection and providing greater holding power.

Finishes:

CRL Petite 037 Wall Mount Full Back Plate Hinge


Catalog Number: PET037CH
Finish: CHROME

Precise Closing Feature to Zero Degrees
Available in Several Beautiful Finishes
3 Year Warranty

The CRL Petite Series of professional hinges is able to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) tempered safety glass. A variety of three styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Petite Series provides a complete spectrum of hinges for frameless shower doors using 1/4 to 5/16 inch (6 to 8 millimeter) safety glass. Developed to allow virtually every application configuration, Petite Series Hinges deliver design freedom. Petite Hinges have mitered edges with curved corners to provide an aesthetically pleasing look. Petite Hinges have 25% thicker plates than competitive hinges, thereby reducing deflection and providing greater holding power.

Finishes:

CRL Petite 054 Wall Mount 45º Outside Plane Hinge


Catalog Number: PET054CH
Finish: CHROME

Precise Closing Feature to Zero Degrees
Available in Several Beautiful Finishes
3 Year Warranty

The CRL Petite Series of professional hinges is able to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) tempered safety glass. The Petite 054 Series is designed to be able to mount a door on a wall that runs at a 45 degrees outside plane. The Petite Series provides a complete spectrum of hinges for frameless shower doors using 1/4 to 5/16 inch (6 to 8 millimeter) safety glass. Developed to allow virtually every application configuration, Petite Series Hinges deliver design freedom.

Finishes:

CRL Monaco 045 Wall Mount 45º Inside Plane Hinge


Catalog Number: M0N045CH
Finish: CHROME

Used to Wall Mount on a 45 Degree Inside Plane
Available in Several Beautiful Finishes
3 Year Warranty

The CRL Monaco Series introduces charm, richness and character to the choice of frameless shower door hinges using 1/4 to 5/16 inch (6 to 8 millimeter) safety glass. Available in two wall mount and four glass-to-glass styles, Monaco Hinges present numerous design and configuration options. Aesthetically pleasing beveled edges and corners give Monaco Hinges the look many architects and designers desire. Several standard finishes are stocked.

Finishes:

CRL Monaco 054 Wall Mount 45º Outside Plane Hinge


Catalog Number: M0N054CH
Finish: CHROME

Used to Wall Mount on a 45 Degree Outside Plane
Available in Several Beautiful Finishes
Three Year Warranty

The CRL Monaco Series introduces charm, richness and character to the choice of frameless shower door hinges using 1/4 to 5/16 inch (6 to 8 millimeter) safety glass. Available in two wall mount and four glass-to-glass styles, Monaco Hinges present numerous design and configuration options. Aesthetically pleasing beveled edges and corners give Monaco Hinges the look many architects and designers desire. Several standard finishes are stocked.

Finishes:

CRL Monaco 037 Wall Mount Full Back Plate Hinge


Catalog Number: M0N037CH
Finish: CHROME

Precise Closing Feature to Zero Degrees
Available in Several Beautiful Finishes
3 Year Warranty

The CRL Monaco Series introduces charm, richness and character to the choice of frameless shower door hinges using 1/4 to 5/16 inch (6 to 8 millimeter) safety glass. Available in two wall mount and four glass-to-glass styles, Monaco Hinges present numerous design and configuration options. Aesthetically pleasing beveled edges and corners give Monaco Hinges the look many architects and designers desire. Several standard finishes are stocked.
Finishes:

CRL Anaheim Wall Mount Full Back Plate Hinge

Catalog Number: 3800112
Finish: CHROME

For 3/8″ & 1/2″ (10 & 12 mm) Tempered Glass
Solid Forged Brass Hinges With Square Corners & Edges
Available in Several Finishes

The CRL Anaheim Series Shower Door Hinge features precision machined stainless steel components with mouse ear design for added holding strength. The versatile, adaptable styling of this hinge will compliment a traditional as well as a contemporary shower installation. This graceful simple design, besides being very functional, is also timeless. It is self closing from 25 degrees to self centering 0 degree return. (5 degree positive closure and 45 degree configurations available) An allen wrench is included with each hinge. This series hinge conservatively rated at 40 pounds per hinge.

Finishes:

CRL Milano Series Wall Mount Hinges


Catalog Number: M1L037CH
Finish: CHROME

Precise Closing Feature to Zero Degrees
Available in Several Beautiful Finishes
3 Year Warranty

The CRL Milano Series of professional hinges is able to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) tempered safety glass. A variety of three styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The traditionally designed Milano Series of Hinges are constructed of solid brass material for reliable and durable performance. The closing action of the Milano allows the door precise closing to zero degrees. Two Wall Mount styles and one Glass-to-Glass style provide design flexibility. The Milano Series offers five elegant finishes from which to choose. Accommodates 1/4 to 5/16 inch (6 to 8 millimeter) thick glass.

Finishes:

CRL Junior Geneva 574 5º Pre-Set Wall Mount Short Back Plate Hinge


Catalog Number: JRG574CH
Finish: CHROME

Self-Centering with Reversible 5 Degree Pivot Pin
3 Year Warranty

CRL Junior Geneva Series of professional hinges are able to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) glass. A variety of six styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. The same elegant European design that has made our Geneva Series so popular is available in a smaller version, the Junior Geneva, to offer additional application opportunities. Used to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) thick glass, the Junior Geneva is made of solid brass. There are three Wall Mount styles along with 90, 135 and 180 Degrees Glass-to-Glass styles. The Junior Geneva is self-centering and available in seven popular finishes. They contain a Reversible Pivot Pin for optional 5 degree offset door closure.

Finishes:

CRL Junior Geneva 074 Wall Mount Short Back Plate Hinge


Catalog Number: JRG074CH
Finish: CHROME

Self-Centering with Reversible 5 Degrees Pivot Pin
Available in Several Beautiful Finishes
3 Year Warranty

CRL Junior Geneva Series of professional hinges are able to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) glass. A variety of six styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. The same elegant European design that has made our Geneva Series so popular is available in a smaller version, the Junior Geneva, to offer additional application opportunities. Used to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) thick glass, the Junior Geneva is made of solid brass. There are three Wall Mount styles along with 90, 135 and 180 Degrees Glass-to-Glass styles. The Junior Geneva is self-centering and available in seven popular finishes. They contain a Reversible Pivot Pin for optional 5 degree offset door closure.

Finishes:

CRL Junior Geneva 037 Wall Mount Full Back Plate Hinge


Catalog Number: JRG037CH
Finish: CHROME

Self-Centering with Reversible 5 Degree Pivot Pin
Available in Several Beautiful Finishes
Three Year Warranty

CRL Junior Geneva Series of professional hinges are able to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) glass. A variety of six styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. The same elegant European design that has made our Geneva Series so popular is available in a smaller version, the Junior Geneva, to offer additional application opportunities. Used to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) thick glass, the Junior Geneva is made of solid brass. There are three Wall Mount styles along with 90, 135 and 180 Degrees Glass-to-Glass styles. The Junior Geneva is self-centering and available in seven popular finishes. They contain a Reversible Pivot Pin for optional 5 degree offset door closure.

Finishes:

CRL Trianon Series Wall Mount Hinge


Catalog Number: TR1037CH
Finish: CHROME

Self-Centering with Reversible 5 Degree Pivot Pin
Available in Several Beautiful Finishes
3 Year Warranty

The CRL Trianon Series of professional hinges is able to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) glass. A variety of five styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. Trianon Hinges can be used to support glass in swinging door installations. They feature radiused corners and beveled edges in several decorator finishes. Trianon Hinges are constructed of solid brass with a self-centering mechanism for door alignment when within 15 degrees of the center. They contain a Reversible Pivot Pin for optional 5 degree offset door closure. Five distinct models include two Wall Mount styles, along with three Glass-to-Glass styles.

CRL Grande Series Wall Mount Hinges


Catalog Number: GRA037CH
Finish: CHROME

Can be Side Mounted at Top and Bottom
Available in Several Beautiful Finishes
3 Year Warranty

Our CRL Grande Series of professional hinges are able to accommodate 5/16 to 3/8 inch (8 to 10 millimeter) tempered safety glass. A variety of five styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Grande Hinge incorporates a larger mounting surface to provide superior support for frameless shower doors. The beveled edges are an attractive accent to Grande’s strong rectangular design, and the Offset Back Plate Wall Mount Model gives a clean exterior appearance. Grande Hinges can be mounted on the top and bottom corners of the door, or anywhere in-between. Grande is constructed of solid brass for years of reliable service.

Finishes:

CRL Classique Series Wall Mount Hinges


Catalog Number: CLA037CH
Finish: CHROME

Features Round Design and Beveled Edges
Available in Several Beautiful Finishes
3 Year Warranty

The CRL Classique Series of professional hinges is able to accommodate 5/16 to 3/8 inch (8 to 10 millimeter) tempered safety glass. A variety of five styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Classique Shower Door Hinge is a design apart from traditional hinges. Beautiful round design and beveled edges are the result of an artist’s unique concept of the perfect hinge for decors with strong curved and contoured influences. There are five distinct models, including a Flush Back Plate Wall Mount Hinge for clean exterior sight lines. The Classique’s beveled edges make an excellent presentation of sleek design, while the solid brass construction ensures superior quality and long life.

Finishes:

CRL Zurich 05 Wall Mount Outswing Hinge


Catalog Number: ZUR05PS
Finish: POLISHED STAINLESS

Ideal for Bi-Fold Application
Available in Several Beautiful Finishes
10 Year Warranty
ZURICH hinges are unavailable for the German market (ZURICH Beschläge sind für den deutschen Markt nicht verfügbar!)

The CRL Zurich Series of professional hinges is able to accommodate 5/16 to 3/8 inch (8 to 10 millimeter) tempered safety glass. A variety of six styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. The Zurich Series was CRL’s first offering of the popular bi-fold hinges. All six styles of Zurich Hinges feature stainless steel construction and are available in a variety of finishes. The brass finish is also available in solid brass construction with a protective coating. In addition, screws and washers are interchangeable for a special design accent. Only two holes per attachment are required, with no cut-out necessary.

Finishes:

CRL Zurich 03 Wall Mount Inswing Hinge


Catalog Number: ZUR03PS
Finish: POLISHED STAINLESS

Ideal for Bi-Fold Application
Available in Several Beautiful Finishes
10 Year Warranty
ZURICH hinges are unavailable for the German market (ZURICH Beschläge sind für den deutschen Markt nicht verfügbar!)

The CRL Zurich Series of professional hinges is able to accommodate 5/16 to 3/8 inch (8 to 10 millimeter) tempered safety glass. A variety of six styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. The Zurich Series was C.R. Laurence’s first offering of the popular bi-fold hinges. All six styles of Zurich Hinges feature stainless steel construction and are available in a variety of finishes. The brass finish is also available in solid brass construction with a protective coating. In addition, screws and washers are interchangeable for a special design accent. Only two holes per attachment are required, with no cut-out necessary.

Finishes:

CRL Arctic Series Wall Mount Hinges


Catalog Number: ARC044BS
Finish: BRUSHED STAINLESS

Our Most Unique Design for the Construction of Frameless Showers
Set Doors at 90, 135, or 180 Degrees, or Anywhere In-Between
Constructed of Stainless Steel in Your Choice of Brushed or Polished Finishes
Fits 5/16″ (8 mm) and 3/8″ (10 mm) Thick Glass (Holes Required)
ARCTIC hinges are not available in Europe

This CRL Arctic Series Hinge is constructed of stainless steel, and is available in Glass-to-Glass and Glass-to-Wall models. Both are intended for use with 5/16 and 3/8 inch (8 and 10 millimeter) tempered safety glass. Neither requires that the glass be notched, only that each glass panel have two 1/2 inch (12 millimeter) holes drilled for the through-bolts. The body of the Arctic Hinge is all stainless steel with a pivot point that swings a full 180 degrees. Arctic gives you the option to set doors at 90, 135, or 180 degrees, or anywhere in-between. That’s a feature most other hinges can’t offer. If you’re looking for something new in frameless hinges, try the Arctic Series.

Finishes:

CRL Sydney Series Wall Mount Hinges


Catalog Number: SYD044PS
Finish: POLISHED STAINLESS

Our Spider Type Design for the Construction of Frameless Showers
Choice of Two Mounting Options: Glass-to-Glass and Glass-to-Wall
Constructed of 316 Stainless Steel in Your Choice of Brushed or Polished Finishes

For a new design in Frameless Shower Door Hinges, look no further than our Sydney Series. The unique “Spider Type” design is certain to give the frameless shower door a different look that will surely be noticed. Constructed of durable 316 stainless steel, Sydney Hinges are available in Wall-to- Glass and Glass-to-Glass models. The Glass-to-Glass model offers three settings at 90, 135, and 180 degrees. For doors falling in between these common installation angles, the springs may be removed to allow a “free-swinging” hinge. Two holes are required per hinge for each panel to accommodate the through-bolts, with no cut- cut necessary. The 316 stainless steel body of the Sydney Hinge allows the door to swing 90 degrees outward. Polished Stainless Steel and Brushed Stainless Steel finishes are offered.

Finishes:

CRL Elite Series Wall Mount Hinges


Catalog Number: ELT074CH
Finish: CHROME

Ability to be Side Mounted at Top and Bottom Corners
Available in Several Beautiful Finishes
3 Year Warranty

The CRL Elite Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) thick tempered safety glass. The Elite Series is a premium hinge for the wider and heavier glass doors. Unlike most other hinges, the Elite can be side mounted on the top and bottom corners of the door, or anywhere in-between. Containing a positive three-screw clamping system, the Elite Hinge incorporates a cut-out and through-stud that eliminates slippage. The Elite Series offers the same internal mechanism as our popular Geneva Series and contains a Reversible Pivot Pin for optional 5 degree offset door closure. A Custom Pivot Pin is available for “off-angle” installations.

Finishes:

CRL Ultimate Series Wall Mount Hinges


Catalog Number: ULT037PS
Finish: POLISHED STAINLESS

Self-Centering with Reversible 5 Degree Pivot Pin
Available in Two Beautiful Finishes
3 Year Warranty

The CRL Ultimate Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. A variety of two styles, Wall Mount and Glass-to-Glass types, gives design flexibility. The Ultimate Series Hinge is named primarily for its combination of design elegance and service life. Featuring the same beautiful rounded corners and beveled edges of the Pinnacle Hinge, the Ultimate Hinge is constructed entirely of stainless steel. This all-stainless construction gives the Ultimate Hinge a durability not usually found in brass hinges. The Ultimate has superior survivability in conditions of accelerated corrosion, such as seaside communities with high atmospheric salt levels. The Ultimate Hinge has stainless steel plunger tips, pins and springs to endure long service life and reliable door closure. It also has the same Reversible 5 Degree Pivot Pin featured in our Geneva, Cathedral, Pinnacle and Elite Series. A Custom Pivot Pin is available for “off-angle” installations.

Finishes:

CRL Estate Series Wall Mount Hinges


Catalog Number: EST037CH
Finish: CHROME

Self-Centering Action
Available in Many Beautiful Finishes
3 Year Warranty

The CRL Estate Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) tempered safety glass. A variety of four styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. These beautifully finished, solid brass forged Estate Hinges make it possible to mount 3/8 to 1/2 inch (10 to 12 millimeter) thick shower doors without surrounding frames, so the door has an almost “floating” appearance. The Estates heavy-duty stainless steel springs allow the door to swing 90 degrees inwards and outwards. A friction cam allows the door to be firmly maintained in any position, except when within 15 degrees of the closed position, where it is tapered to assist in centering the door.

Finishes:

CRL Concord Series Wall Mount Hinges


Catalog Number: SDH037CH
Finish: CHROME

Self-Centering Action
Available in Several Beautiful Finishes
3 Year Warranty

The CRL Concord Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) tempered safety glass. A variety of four styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. These beautifully finished, solid brass forged Concord Hinges make it possible to mount 3/8 to 1/2 inch (10 to 12 millimeter) thick shower doors without surrounding frames, so the door has an almost “floating” appearance. The Concords heavy- duty stainless steel springs allow the door to swing 90 degrees inwards and outwards. A friction cam allows the door to be firmly maintained in any position, except when within 15 degrees of the closed position, where it is tapered to assist in centering the door.

Finishes:

CRL Roman 537 5º Pre-Set Wall Mount Full Back Plate Hinge


Catalog Number: R0M537CH
Finish: CHROME

Factory Set for 5º Offset Closure into Shower Interior
Available in Several Beautiful Finishes
Three Year Warranty

The CRL Roman Series of professional hinges is able to accommodate 5/16 to 1/2 inch (8 to 12 millimeter) glass. A variety of five styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Roman Hinges are self-centering, Factory Set for 5º Offset Closure into Shower Interior. In addition, Custom Pivot Pins are available to accommodate “off angle” installations.

Finishes:

CRL Roman 037 Wall Mount Full Back Plate Hinge


Catalog Number: R0M037CH
Finish: CHROME

Self-Centering with Reversible 5 Degree Pivot Pin
Available in Several Beautiful Finishes
Three Year Warranty

The CRL Roman Series of professional hinges is able to accommodate 5/16 to 1/2 inch (8 to 12 millimeter) glass. A variety of five styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Roman Hinges are self-centering, and contain a Reversible 5 Degree Pivot Pin. In addition, Custom Pivot Pins are available to accommodate “off angle” installations.

CRL Cologne 537 5º Pre-Set Wall Mount Full Back Plate Hinge


Catalog Number: C0L537CH
Finish: CHROME

Factory Set for 5 Degree Offset Closure into Shower Interior
Available in Several Beautiful Finishes
3 Year Warranty

The CRL Cologne Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. A variety of styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Cologne Hinges are self-centering, and contain a Reversible 5º Pivot Pin. In addition, Custom Pivot Pins are available to accommodate “off angle” installations.

Finishes:

CRL Cologne 037 Wall Mount Full Back Plate Hinge


Catalog Number: C0L037CH
Finish: CHROME

Accommodates 3/8″ to 1/2″ (10 to 12 mm) Glass
Available in Several Beautiful Finishes
Three Year Warranty

The CRL Cologne Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. A variety of styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Cologne Hinges are self-centering, and contain a Reversible 5º Pivot Pin. In addition, Custom Pivot Pins are available to accommodate “off angle” installations.

Finishes:

CRL Adjustable Cologne 337 Wall Mount Full Back Plate Hinge


Catalog Number: C0L337CH
Finish: CHROME

Adjustable to Any Angle Up To 90 Degrees Without Removing Door
Available in Several Beautiful Finishes
Three Year Warranty

The CRL Cologne Adjustable Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) tempered safety glass. A variety of two styles, Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Cologne Adjustable Series has taken our popular Cologne Series to a new level. Adjustment to accommodate the angle desired (up to 90 degrees) is done after the door is installed. Once the door is hung, simply loosen the allen screws and turn the door to the desired closed position. Tighten the Allen screws in the new self-centering location. The door can swing 90 degrees inward and also 90 degrees outward (adjusting angle from factory set position will reduce 90 degree swing in that direction). For doors pulling outwards only (using a clear door jamb), you can adjust the hinge to close 5 degree inside the shower area, thus having the door close snugly against the jamb.

Finishes:

CRL Vienna Hinge and Handle Set


Catalog Number: V1ES3CH
Finish: CHROME

Set Includes Two Hinges and One Pull
Available in Our Most Popular Colors
All Together in Easy-To-Order Sets

This CRL Shower Pull and Hinge Set consists of one each BM6x6 Tubular Back-To-Back Pull Handle that has hole spacing of six inches (152.4 millimeters) Center-to-Center, and two each Vienna 037 Series Wall Mount Hinges. We’ve made it easier for you to get two of our most popular Hinge and our best-selling Pull Handle by combining them in one easy-to-order set. These Wall Mount Hinges or Top and Bottom Mount Pivot Hinges make up over 90 percent of our demand.

Finishes:

CRL Vienna 537 5º Pre-Set Wall Mount Full Back Plate Hinge


Catalog Number: V1E537CH
Finish: CHROME

Accommodates 3/8″ to 1/2″ (10 to 12 mm) Glass
Available in Several Beautiful Finishes
Three Year Warranty

The CRL Vienna Series of professional hinges is designed to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. Available in both Wall Mount and Glass-to-Glass styles, it provides design flexibility. Vienna Series Hinges are constructed of solid brass with all moving parts (pins and springs) in stainless steel. Two strategically placed pins inside the hinge provide template options, and satisfy two schools of thought for mounting shower door hinges. It allows the Vienna Hinge to be used with it’s own CRL “mouse-ears” cut-out, or in some cases fit competitive “mouse-ear” cut-outs. On the other hand, to enable increased adjustability, the two pins can be removed which allows the Vienna Hinge to fit it’s own CRL rectangular shape, square cornered cut-out, or in some cases, fit competitive rectangular shaped, square cornered cut-outs.

Finishes:

CRL Vienna 037 Wall Mount Full Back Plate Hinge


Catalog Number: V1E037CH
Finish: CHROME

Accommodates 3/8″ to 1/2″ (10 to 12 mm) Glass
Available in Several Beautiful Finishes
Three Year Warranty

The CRL Vienna Series of professional hinges is designed to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. Available in both Wall Mount and Glass-to-Glass styles, it provides design flexibility. Vienna Series Hinges are constructed of solid brass with all moving parts (pins and springs) in stainless steel. Two strategically placed pins inside the hinge provide template options, and satisfy two schools of thought for mounting shower door hinges. It allows the Vienna Hinge to be used with it’s own CRL “mouse-ears” cut-out, or in some cases fit competitive “mouse-ear” cut-outs. On the other hand, to enable increased adjustability, the two pins can be removed which allows the Vienna Hinge to fit it’s own CRL rectangular shape, square cornered cut-out, or in some cases, fit competitive rectangular shaped, square cornered cut-outs.

Finishes:

CRL Adjustable Vienna 337 Wall Mount Full Back Plate Hinge


Catalog Number: V1E337CH
Finish: CHROME

Adjustable to Any Angle Up To 90 Degrees Without Removing Door
Available in Several Beautiful Finishes
Three Year Warranty

The CRL Vienna Adjustable Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) tempered safety glass. A variety of two styles, Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Vienna Adjustable Series has taken our popular Vienna Series to a new level. Adjustment to accommodate the angle desired (up to 90 degrees) is done after the door is installed. Once the door is hung, simply loosen the allen screws and turn the door to the desired closed position. Tighten the Allen screws in the new self-centering location. The door can swing 90 degrees inward and also 90 degrees outward (adjusting angle from factory set position will reduce 90 degree swing in that direction). For doors pulling outwards only (using a clear door jamb), you can adjust the hinge to close 5 degree inside the shower area, thus having the door close snugly against the jamb.

Finishes:

CRL Pinnacle Hinge and Handle Set


Catalog Number: P1NS3CH
Finish: CHROME

Set Includes Two Hinges and One Pull
Available in Our Most Popular Colors
All Together in Easy-To-Order Sets

This CRL Shower Pull and Hinge Set consists of one each BM6x6 Tubular Back-To-Back Pull Handle that has hole spacing of six inches (152.4 millimeters) Center-to-Center, and two each Pinnacle 037 Series Wall Mount Full Back Plate Standard Hinges. We’ve made it easier for you to get two of our most popular Hinge and our best-selling Pull Handle by combining them in one easy-to-order set. These Wall Mount Hinges or Top and Bottom Mount Pivot Hinges make up over 90 percent of our demand.

Finishes:

CRL Adjustable Pinnacle 337 Series Wall Mount Full Back Plate Hinge


Catalog Number: P1N337CH
Finish: CHROME

Adjustable to Any Angle Up To 90 Degree Without Removing Door
Available in Several Beautiful Finishes
Three Year Warranty

The CRL Pinnacle Adjustable Series of professional hinges is able to accommodate 5/16 to 1/2 inch (8 to 12 millimeter) tempered safety glass. A variety of two styles, Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Pinnacle Adjustable Series has taken our popular Pinnacle Series to a new level. Adjustment to accommodate the angle desired (up to 90 degrees) is done after the door is installed. Once the door is hung, simply loosen the allen screws and turn the door to the desired closed position. Tighten the Allen screws in the new self-centering location. The door can swing 90 degrees inwards and outwards (adjusting angle from factory set position will reduce 90 degrees swing in that direction). For doors pulling outwards only (using a clear door jamb), you can adjust the hinge to close 5 degree inside the shower area, thus having the door close snugly against the jamb.

Finishes:

CRL Pinnacle 537 5º Pre-Set Wall Mount Full Back Plate Hinge


Catalog Number: P1N537CH
Finish: CHROME

Self-Centering with Reversible 5 Degree Pivot Pin
Available in Several Beautiful Finishes
Three Year Warranty

The CRL Pinnacle Series of professional hinges is able to accommodate 5/16 to 1/2 inch (8 to 12 millimeter) glass. Several different styles are available, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Pinnacle Hinges are self-centering, and contain a Reversible 5 Degree Pivot Pin. In addition, Custom Pivot Pins are available to accommodate “off angle” installations.

Finishes:

CRL Pinnacle 037 Wall Mount Full Back Plate Hinge


Catalog Number: P1N037CH
Finish: CHROME

Self-Centering with Reversible 5 Degree Pivot Pin
Available in Several Beautiful Finishes
Three Year Warranty

The CRL Pinnacle Series of professional hinges is able to accommodate 5/16 to 1/2 inch (8 to 12 millimeter) glass. Several different styles are available, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Pinnacle Hinges are self-centering, and contain a Reversible 5 Degree Pivot Pin. In addition, Custom Pivot Pins are available to accommodate “off angle” installations.

Finishes:

CRL Replacement Hinge for KD Door Kits

Catalog Number: MH1CH
Finish: BRITE ANODIZED

For 1/4″ (6 mm) Glass
Requires 1″ (25 mm) Hole in Glass Per Hinge
Works with HDK Series Frameless KD Shower Door Kits

These CRL Mini Hinges are designed to work with our HDK Series Frameless KD Shower Door Kits. They allow the look of heavy glass, while utilizing lower cost 1/4 inch (6 millimeter) thick glass. The hinges are applied through a 1 inch (25 millimeter) hole, and feature a molded nylon insert that allows a 3/16 inch (5 millimeter) horizontal adjustment in each direction. Minimum order is one each.

Finishes:

CRL 72″ High Frameless Hinge KD Kits

Catalog Number: HDK72BA
Finish: BRITE ANODIZED

Provides the Appearance of a Heavy Glass Unit While You Actually Supply Only 1/4″ (6 mm) Glass
Door is Manually Closed and Has a Magnetic Hold
Requires Only Two Holes in Glass

The CRL Frameless Hinge KD Door Kit allows the look of heavy glass, while lowering cost by utilizing 1/4 inch (6 millimeter) thick glass (not included). The hinges are applied through a one inch (25.4 millimeter) hole that is placed 1-1/4 inches (31.8 millimeters) from the edge of the glass.

Finishes:

CRL 64″ High Frameless Hinge KD Kits

Catalog Number: HDK64BA
Finish: BRITE ANODIZED

Provides the Appearance of a Heavy Glass Unit While You Actually Supply Only 1/4″ (6 mm) Glass
Door is Manually Closed and Has a Magnetic Hold
Requires Only Two Holes in Glass

The CRL Frameless Hinge KD Door Kit allows the look of heavy glass, while lowering cost by utilizing 1/4 inch (6 millimeter) thick glass (not included). The hinges are applied through a one inch (25.4 millimeter) hole that is placed 1-1/4 inches (31.8 millimeters) from the edge of the glass.

Finishes:

CRL Top Rail for 1/4″ Glass

Catalog Number: TR7214BA
Finish: BRITE ANODIZED

Concealed Overhead Roller Design Allows Greater Glass Exposure, Less Metal Exposure
Extruded Aluminum
For 1/4″ (6 mm) Thick Glass

This CRL Top Hanger for 1/4″ Glass is a replacement hanger for the S386060 Series Slider Kit. The same hanger TR72 for 3/8 inch (10 millimeter) is also available.

Finishes:

CRL Top Hanger Rail for 3/8″ Glass

Catalog Number: TR72BA
Finish: BRITE ANODIZED

Concealed Overhead Roller Design Allows Greater Glass Exposure, Less Metal Exposure
Extruded Aluminum
For 3/8″ (10 mm) Thick Glass

This CRL Top Hanger for 3/8″ Glass is a replacement hanger for the S386060 Series Slider Kit. The same hanger TR7214 for 1/4 inch (6 millimeter) is also available.

Finishes:

CRL Side Jamb for 3/8″ Glass

Catalog Number: SJ72BA
Finish: BRITE ANODIZED

Concealed Overhead Roller Design Allows Greater Glass Exposure, Less Metal Exposure
Extruded Aluminum
For Both 1/4″ and 3/8″ (6 and 10 mm) Glass

This CRL Side Rail for 1/4″ and 3/8″ Glass is a replacement rail for the S386060 Series Slider Kit.

Finishes:

CRL Header Extrusion for 3/8″ Glass

Catalog Number: H72BA
Finish: BRITE ANODIZED

Concealed Overhead Roller Design Allows Greater Glass Exposure, Less Metal Exposure
Extruded Aluminum
For Use With 3/8″ (10 mm) Thick Glass

This CRL Header for 3/8″ Glass is a replacement header for the S386060 Series Slider Kit.

Finishes:

CRL Header Extrusion for 1/4″ Glass

Catalog Number: H7214BA
Finish: BRITE ANODIZED

Concealed Overhead Roller Design Allows Greater Glass Exposure, Less Metal Exposure
Extruded Aluminum
For Use With 1/4″ (6 mm) Thick Glass

This CRL Header for 1/4″ Glass is a replacement header for the S1460 Series Slider Kit.

Finishes:

eXTReMe Tracker