In any case, if one hates shower curtains and the mold they can attract, she may want to opt for a glass shower door. After all, the door is a long-lived option with the way they’re made to endure years of usage. Then there is the attractive presentation that a door of glass compliments the room with.

So, if someone wants to make a bathroom appear larger, she can. All that is needed is light, bright colors and clear glass items such as new glass shower doors. Either the kind that have no design at all on them so they are clean looking or those with little etching.

If one has an odd shaped bathroom, she may want to put a neo angle shower in with clear glass shower doors. Or maybe mirror tile a wall to reflect the glass shower doors. One could use paints and create a stained glass on her glass shower doors.

All the problems associated with usage of the shower stall, can be divided into three groups. The first of them are caused by defective sanitary ware and can be detected at the stage of assembly and installation of the construction. These problems can be called objective, because they do not depend on the owner of cabin and its user, so they require a decision by the producers or suppliers of sanitary ware. Typically, the warranty conditions apply to such cases, so the consumer has the right to replace the purchased products to a new and better one or to get back the money spent on the purchase.

The second group of issues is those ones that are caused by illiterate assembly or unskilled installation of sanitary ware. There is a manual for assembling and installing the cabin that is supplied with each stall, allowing the owner to install the stall without problems. But on the other hand, production of some manufacturers has a number of features, which are known only to experienced professionals. Mistakes made by the user during self-installation of sanitary ware are often not subject to the terms of the contract for warranty reimbursement, so the owner will have to pay the stall repairs from his own pocket.

The third group of problems is those that are caused by neglect or improper care of the stall during its usage. Practice shows that the service life the shower stall may be reduced by two to three times as a result of devil-may-care attitude. Thus, regular and thorough maintenance of a shower is a reliable investment and guarantee the most long-term service of sanitary ware.

Competent care for the stall not only provides an opportunity to extend the life of sanitary ware, but it also allows you to keep its visual characteristics unchanged permanently.

Turning off the backlights every time right after taking a shower will significantly increase the lifetime of the lighting equipment, integrated into the stall.

Peculiarities of caring for sanitary ware depend greatly on the quality of the water that is delivered through the city water supply. The absence of filters, peculiarities of water mineral composition may affect, as well as too long service life of concrete pipes, which needed to be changed a long, long time ago. In order to reduce the aggressive influence of water on the constructive elements of the cabin, the water quality should be changed. Filters help to cope with this problem, so that they must be installed at number of two on each of the water pipes before connecting the stall to the water supply system. Filters of primary and fine purification neutralize the calcium plaque in water, resulting in significantly increased lifetime mixers and whirlpool jets. Such filters will work properly only if every 2-3 months they will be thoroughly cleaned under running water or replaced by new ones.

Tap water also has a devastating effect on the acrylic surface of the tray and onto a glass or plastic surface of the side walls and doors of a stall. Regular thorough cleaning of the stall will help to deal with this adverse effect.

After each shower acrylic tray should be washed with a special cleanser that does not contain abrasive particles and does not scratch the surface. Abrasive will clean acrylic in a short time, but it will also cover the surface with small scratches, which later would cause the appearance of yellow plaque and dull-coloring of the tray. Tray should be wiped dry with a clean rag after thorough rinsing in running water. The final stage – acrylic tray covered with a thin layer of shampoo, not mixed with water using a clean rag or sponge.

If you leave drops of water on the glass or plastic doors and walls of the stall after taking shower, they will to form on the surface stains and spots after drying out – that’s how a high content minerals and salts in the water affects. It is very difficult to wash these stains then – the cleaning process requires considerable labor and time costs, so its mach better to prevent their occurrence. It is highly recommended to work the surface up with a wiper after washing and drying it. The last step is especially necessary in the case of a break in the usage of the stall, when the owners are leaving for some time. After such a work up the walls and doors of stalls will shine as good as new, but if they will be left untreated, they will be covered with a thick layer of dust over the idle time

Poor water quality makes the owners to clean all exterior metal surfaces, which include hydro-massage jets, shower heads, faucets, of calcium plaque regularly. It is recommended to use special equipment for metal items for these works, which thoroughly cleans them without changing their appearance. In addition, users must wipe all the metal and chrome and mirrored surfaces from water droplets and then work them up with a wiper each time after taking a shower.

The price for shower stalls and their component parts is conditioned a set of structural and qualitative characteristics. So, you can always make choice that will match your aesthetic tastes, design-installation conditions and financial opportunities. Thus, it would be possible to pick up an acceptable option and successfully implement their ideas.

If you decide to assemble shower stall from the separate components, you first need to note that it may be located either in the corner of the bathroom, or adjacent to one of the walls. You will also need to prepare the tools and materials that may be found in your home: a drill with drill bits, screwdriver, screws and cement.

Before starting installation works, check out some important things: to see if the angle of docking wall shower is 90 °; how tightly the edge of tray should be close to the walls; if the bell sewer pipe coincides with a sink in the tray or not. It is better to attach the lower part of the construction to sewer immediately. Attach the adjustable legs to the bottom of the tray, placing the pre-cut pieces of cardboard or other material for the laying under each. Before you place the tray in a recess in the floor, handle the surface well with a hammer and chisel so that they are not sharp. If the angle is not straight, straighten the wall at the height of tray so that its edges are tightly adhered to the wall. Mount the sewer pipes so that when you install the tray socket sewer hole was just under the sink. Tray with adjustable legs must be put up exactly horizontally. And be careful – do not scratch the surface of tray!

As always, the best option is the middle one, without any extremes. Future lucky owner of the shower Device must be absolutely clear about where and how it will be placed. Moreover, if your project has any so called “bottlenecks”, there is a great reason to trace and fathom them most carefully.

The things that must be done before the installations:
• All communications, including water purification filters and reducers;
• Automatic network switchers;
• If necessary – ventilation, telephone and audio line;
• Finished floor and walls.
• Lighting (temporary one is acceptable)
• If the raised floor is required, it also must be assembled beforehand
Also, it must be clear what bathroom and will be installed in the bathroom except the stall, into order to prevent situations when the stall is already installed but the the toilet sink is left in the hallway.

The things that must be done after the installations:

The question of vertical sizes of the cabin is a difficult one. When mounting, booth is put up horizontally, loosen or, conversely, tightening adjustable feet, so the finished ceiling may complicate the assembly. That’s why, suspended ceiling must be mounted after the installing of he stall. Of course, it doesn’t matter for the installation of the bathtub. It’s better to remove the doors or take the time to install them.

It is not recommended to have incandescent bulbs closer than 2 ft from the wall or roof of the cab. The heated bulb can easily damage the acrylic surface.

The pressure of the hot and cold water in the water system should be restricted by using the reducers on the level of 4-4,5 atmospheres. In order to eliminate the salt deposits on the sprinklers and watering holes it is necessary to install mechanical cleaning filters on the entering water pipes in the bathroom.

It is very important to provide access to filters for periodic audits, cleaning or replacement.

The booth should be grounded in order to make it safe for using; the power line device must be equipped with a circuit breaker, designed for operating current not exceeding 30 mA. (most modern stalls already have the equipment).

If you live in an apartment, you need to fathom the width of the stairs or elevator doors in advance. It would be extremely annoying if the purchased and brought device will get stuck halfway.

Many future customers don’t identify the situation in the market whirlpool baths and shower stall correctly enough. After passing the shops or markets in search of stall or baths, or by visiting a large number of sites anyone can think that there are more than enough options to purchase. On the one hand this is true, but there may be problems – sometimes demand exceeds the supply. The fact is that manufacturers change their product range, some models and brands withdraw from the market, superseded by others. Unfortunately, sometimes the situation happens, when someone is not taking care of premature booking product but proceed to repair works, having in mind a specific model. And, when all communications are ready and it remains only to deliver and install the booth, it appears that there is no this model in the stores anymore. Then he/she has to quickly change plans and look for the same or similar model, and, as practice shows, it’s often more expensive than the one on which he/she had counted before.

The easiest variant is to conclude a supply contract, approve the date and pay of 30-50% cost of the product in advance. Such practices are fairly widespread; in fact, many companies may hold an advance reservation, even by the phone.

Either of models of booths, which are on the market today can be used to create interesting and unique interior for the bathroom. The only thing that may confuse some customers – a huge variety of models, but you will find that the choice had come by itself by considering their characteristics.

Thus, the simplest form is the so-called “shower corner”. There are no extra features. Such construction consists only of the tray and the doors. Enclosed shower stall has a fully enclosed space, that is, a roof, doors and tray. Enclosed space, if necessary, can maintain a constant temperature in the booth. Therefore, this construction can provide additional functions as a bath or a sauna, Charcot shower and so on.

In addition, the shower can be combined with a bath. In this case, the tray is deeper than usual and the booth itself has a much larger area. Also, such a stall can have the function of hydrojet massage, if it has necessary devices, build into the tray.

The tray may made of be cast iron or aluminum, as well as acrylic. Also, a shower has an aluminum frame and sliding or folding doors, moving on special rollers. These rollers are usually the most fragile elements of the whole structure, but this problem can be solved easily with the words “I’ll go buy rolls for a shower”.

On the outer sides of the bath nozzles are attached to the metal tubes. The optimum high pressure flow of water is carried out through the bush with a clearly defined diameter of the hole, which is usually called the liquid spray diffuser. Water filled with bubbles of air creates the effect of relaxing massage, and nozzles can be directed to any point of the body to improve its blood circulation. In addition, this massage prevents the emergence and development of cellulite Everyday adoption of such procedures helps to stay good-looking without even leaving the home!

Nowadays, there is a large variety hydromassage stalls to select from. Usually experts separate standard and corner stalls. Of course, there are some other types, but they are bought rather rare. In addition, the booths can be also separated on one-person models and models for several people.

Before you purchase a shower stall – make yourself sure in its efficiency, because it is obliged to serve you for years. Each booth must have a document, certifying its quality, including warranty. If dealer does not give you this document that is a reason to think about the origin of the shower stall. Primarily, pay attention to the pump – it is the most important piece of equipment. It must be designed in such a way that the pumping equipment will never be flushed with water. Pump is especially important for the hydrojet stalls.

It’s quite easy to remove some unsightly water spots from glass shower doors or other surfaces. Things you’ll need: vinegar, filtered water, spray bottle, sponge, towels and rubber gloves.

Combine 1 part vinegar with 4 parts of filtered water in the empty spray bottle, and test the mixture on the glass shower door to see if it is strong enough to remove the water spots. You may have to adjust this recipe according to how long the water spots have been left untreated. Use more vinegar for tough water spots. Then, put on a pair of rubber gloves to protect your hands and spray the mixture along the top of the glass shower door. Let the vinegar mixture sit for a few minutes. Use the sponge to wipe off the vinegar mixture. You should see the water spots begin to dissolve. If not, repeat with a stronger concentration of vinegar. You may have to use the abrasive side of the sponge to get stubborn stains off, but make sure to test an inconspicuous part of the glass shower door first to check for possible scratching. Once completed, dry the entire shower door with towels.

For the most stubborn water spots, you should try using 100 percent vinegar and an abrasive sponge to remove the water spots. Keep a squeegee in your bathroom and use it regularly to prevent future water spots. Consider equipping your home with a water softener to eliminate hard water. Make sure the bathroom is properly ventilated while cleaning.

The next specimen is far more expensive. Not everyone is able or willing to spend 30 thousands euro on the bath. “Red Diamond bathtub” is made or a luxurious pastime. It’s provided with two waterproof TV-screens, which can be removed by click of a button if you don’t need them. Control panel is decorated with Swarovski crystals and gold.

Support for champagne is also decorated with strass. Of course, it has massage and jacuzzi functions. And what’s more, it has build-into GSM module, which allows run it when you’re out of home. Driving up to your home, you can send message to your bath, and it will fill with water of required temperature by the time you arrive. There is also a thermos function.

But shower look can be created without such expenses. For example there is an idea of colour highlight for water in bath. Just imagine: muted light and glowing water. Special waterproof lamp “Aqua Glow Tub Light” was created for performing a highlight of the water. It can be just put on the bottom of tub fastened on the wall. It cab glow with any colour of a rainbow, so it can be used to perform colourtherapy and you can choose it according to your mood. You can get ready for sleep or make the baby calm wih blue; cheer up with orange; create romantic atmosphere with pink. And it costs only 20 $.

The final specimen is very unaffected. It was created by the Dane Ole Jensen, and he calls it just “soft bath”. It is made oethylene-propylene rubber and filled through a hose, but doesn’t have a sink. Author’s idea was that filled to the edges, it will be hard enough to lay on it, but still much softer than metal or plastic – just like a couch. The water can be poured out by simply taking the hose out. That why this bath is recommended to use in a backyard.

Tempered glass or so-called stalinite is an ordinary glass, which is tempered on a very high temperature – about 600 degrees – and then rapidly cooled. After such treatment glass characteristics become much better. Tempered glass has 6-7 times better impact resistance and can sustain high temperatures up to 300 degrees. In addition, sand-jet pictures look brilliant on it. Tempered glass is used quite widely; show-windows, greenhouses’ roofs, glass doors, partitions and ladders are usually of it and this list is not complete.

The area of shopping malls and offices is need of proper organization. Partitions, made of tempered glass, can separate premises into zones and saving their integrity at the same time. They can have form of any complexity, so they match any interior wonderfully.

Glass objects can be both a main zest and neutral element of the interior. Due to the transparence such objects dissolve in the space and make it visually bigger. Therefore, tempered glass is widely and successfully used today in the ultra-modern interiors.

Most of manufacturers now offer booths with many different functions. In addition to shower itself, there also may be hydro-jet massage, sauna, contrast douche, highlight and even TV, radio or telephone.

Closed shower stall are good for keeping steam and moisture inside and disabling it to fill the bathroom. It helps to keep the walls and ceiling surfaces keep from soaking and deformation.

When you have finally bought your own shower stall, very comfortable and with many useful functions, you should understand that it is only the first step. The next one is installation.

Installing stall on your own can lead to leaking and even a flood. Furthermore, booth may require electricity – improper wiring will cause short circuit. Remaking of such works will cost a fortune, that’s why it’s better to commit all the works to the professionals.

First of all, professionals will help you to choose proper place for your stall – it must be supplied with water and sink pipes and the wires. All the joints, occurred during the installation, must be choked up hermetically – it will prevent any leaks. It is also very important to set the right angle of the tray before its installations – it’s needed for proper water discharge.

Of course, it’s too hard to do all this things properly on your own. But there professional to help you, and will cope with it rapidly and qualifiedly.

Stylish, well-groomed, sparkling with freshness and purity bathroom tells volumes. A well maintained and beautiful bathroom is quite important in our lives, as kind of a symbol of cleanliness and health. So the modern design and qualitative bathroom repair is not only beneficial everyday mood, but also reliability in domestic matters.

Bathroom repair, as well as any other room in the apartment, should begin with a careful thinking through the interior, because the interior is a unique combination of color and style that reflects you best. It is very important to take everything into account, from flooring and tile colours to lighting and equipment model. You also need to realize that the bathroom repair is highly complicated, therefore better to find an organization that will perform all the repairs of your bathroom faithfully and qualitatively.

Experienced and skilled workers with recommendations – this is the main criterion by which by which should select experts for repairing works. The price of repair work will depend directly on the complexity of interior decisions and price of major repairs. Therefore advisable to draw up detailed cost estimates for the beginning and discuss it with professionals.

Comprehensive bathroom repair, as a rule, begins with the dismantling – removing old ceramic tiles and paint from the walls and ceiling. When complete with dismantling, proceed to the leveling of the walls (stucco work). Next comes the turn of sanitary pipe layout of the hot and cold water. Pipes can be polyethylene, polypropylene, plastic or metal; also experts recommend covering them with thermal insulation material. It is extremely important to comply with safety precautions when wiring electricity very strictly as there is a high humidity in any bathroom. All the electrical appliances must be grounded. Cast iron or steel tub also must be grounded. Special sockets and switches made for moist areas are required. To prevent the fungus walls must be processed with waterproof mastic.

When choosing a ceiling for the bathroom better opt for the moisture resistant false ceiling. It’s quite beautiful and, most importantly, long-living. These ceilings are made of aluminum modules, metal rods and other materials. The best material for flooring is tile, as it is reliable and has a great appearance. The wall finishing material may be chosen depending on your imagination. It could be ceramic tile, and washable wallpaper, and lots of others.

Typically, complex repair of standard bathroom takes on average of 3-4 weeks, depending on the complexity and workload. Modern, comfortable, functional bathroom is a reliable rear of your castle.

Here are some basic tips for the bathrooms repair:

– To avoid clogging the riser it’s necessary to lay the pipes with a small inclination in its direction. If there’s a curve (indention) on the riser, it mustn’t be fully horizontal.
- Walls with gypsum or asbestos base can be aligned with plaster instead of sand-cement mixture – it is safer for them.
- When repairing moist premises it is better to use moisture-resistant drywall on metal frame.
- It is highly recommended to use the stainless steel towel dryers from; plastic sink in the bathroom; rack ceiling, on the contrary made of metal, not plastic; wooden or made ​​of waterproof plywood doors and frames.
- When installing the screen to the bath it is better to leave space for the hatch that provides access to the pipework.

First and foremost, before you start repairing the bathroom, interior design and decor must be very considered thoroughly. It is not as unimportant as it seems at first glance.

Thus you first need to choose the style. This may be a classic, old-fashioned, high-tech, modern, or something original mixed. Just think and choose the one you like the most.

Next, choose an interior. Everything must comply with the chosen style. But the main thing is not to spoil everything the wrong light placement. Here you can turn to professionals – they will help you to emphasize the correct areas using illumination.

Materials that will be involved in a bathroom repair should be of the best quality – it’s better not to save on them, or will may be disappointed with the results.

When all the organizational issues are resolved, we can proceed to repair. Here is a sample list of the sequence of repair work:

1. purifying walls of the old tiles or paint
2. removing floor tiles
3. dismantling old bathroom equipment
4. dismantling the door frame if you are planning to change the door
5. dismantling the sewer and water pipes
6. replacing older cranes on a riser with the new ones
7. replacing bridges on a towel dryer
8. cutting grooves in the appropriate places for the laying of new water and sewer pipes
9. installing pressure reducers and water purification filters
10. mounting collector and divorce sewer and water pipes to the planned point
11. performing wiring
12. treating the wall up to the required state by plastering and priming
13. doing the floor lining
14. facing walls and laying the floor with tile
15. installing the bathtub
16. building a screen for bath
17. assembling hanging ceiling and installing spotlights
18. installing and linking up the bathroom equipment

Bathroom repair is usually completed by hanging mirrors and installing the necessary accessories.

How to find good building brigade?

What building materials should be bought?

And, finally, how long will repair works last and how much will they cost?

Here is supposed plan of repair works in small bathroom done by 2 workers.

1-2 days will be expended on dismounting of the old equipment, tile and removing the debris.

Communications installation will last for at least 2-4 days. If replanning is performed all the pipework must be removed into the walls. In this case the biggest part of time will be taken by cutting the grooves of walls. In addition, walls must be planed after such works in order to enable flat tile laying. 3 more days are need for installation of suction fittings and water filters. Total, separation will last for a week.

Then, tiler can start his work. In average, he will plaster and plane walls, doing the moistureproof works and buckle for 3 days. Electrician must start working at the same time. Tile facing will last for 5-10 days.

Hung ceiling will be installed in one day. One more day is required for installing all the bathroom equipment.

Totally, 3-4 weeks are required for repairing works in the bathroom.

It is better when all the bathroom equipment is bought just before the repair works start. It is important because it is necessary to know size of the bath or height of the washer before pipework installation is started. Moreover, the bath itself must be bought first – if it’s simple metal bath, it must be installed before facing the bathroom with tile. But if it is Jacuzzi, this is done in opposite way – bath is installed after the facing is done.

This statement is true not only for bathroom repair in a house or apartment. It is also very important to choose all the equipment in advance when repair works are planned, for example, in jim’s cloakroom – some devices may require specific first working.

For example, there must be built shower zone in a jim’s cloakroom. It is not planned to install the trays, because they are quite expensive and they will enlarge running costs and probability of injuries among the visitors. In this case the proper incline of the floor must be considered in advance; moistureproof works must be performed before laying the tile, wich also must be nonskid. Pipe-bend system also must be installed beforehand. Smoothing-out for the floor and walls tile is one more important thing – it also must be moistureproof, mycoproof and it must be easy to clean. Silicone smoothing-out may seem to be the best decision, but that’s not true – they don’t last for long in the floor tile joints and it’s quite hard to keep them clean.

If it is possible, it’s better to make a trap in the bathroom floor – it will keep you and your neighbors safe from accidental floods.

If you want to make a shower stall, you can install a tray in the floor during the repair works. However, you will need enclosures to protect the floor from splashes – a set of walls and door. But this enclosure don’t have any top and sometimes it’s installed in such a way that walls of the bathroom replace the walls of enclosure – that’s why you will need a special coating on the bathroom walls.

Ready-made shower stall are more expensive than enclosures. But there are thousands of models of different shower stalls on the market. Just like cars, they can have large amount of different conceptions and sets of functions even in the same price range. It’s important to remember before planning your new bathroom with a shower cubicle, that they can have different forms – square, round, rectangular, three-cornered or oval. Each form will create it’s own interior in the bathroom.

After choosing the stall it’s time to choose the mixer – a very small number of stalls have it pre-set. Shower panel might be used instead of mixer. It looks like a console, mounted on the wall, and has different mixers, jet valves and other devices. Shower panels have more functions than simple mixers and they are easy to install, but they require some additional space.

The most important thing is whichever bathroom equipment you will choose, you must be sure about its reliability and competence of the workers, performing the installation. Unlike the furniture, defective or badly mounted mixer can cause flood and property damage.

But even small-sized room should be equipped comfortable, practical and good-looking. But there are cases when one would have to make a choice of what is more important – comfort or beauty. And to reduce such victims to a minimum it’s needed to approach very carefully and thoroughly to the bathroom repair.

Bathroom is a room for the repair of which professional help is required. If you want to avoid future problems do not hire the first available team – be sure to read reviews of these specialists.

But before you give your bathroom into the hands of builders and plumbers, it should be considered, how you see your future bathroom. И это не только цвет стен и цвет пола. And it’s not just the color of the walls and floor color – at first the furniture, sanitary ware and simple technique that will stand in the bathroom should be chosen. Do not hurry to buy all of this. To begin write the entire list of what you want to put in the bathroom. It may be a bath, shower, heated towel rack, sink, boiler, washing machine, shelves, cabinets, mirrors and even a hairdryer. If a bathroom is combined, add the toilet and bidet. Now weight the desirable and possible – “stuffing” with available space. This is best done using software for modeling bathrooms. Such helping programs are very common on the websites of plumbing manufacturers or merchants. First of all, they are good in simplifying the selection of plumbing sizes – all the sizes and models are already available in the program, you only have to arrange them as you wish.

If the room is small, then at the stage of placement of these elements we will face with the fact that nothing fits. So at this stage it is time to apply the imagination. There are few options to think about. The first one is how to enlarge the bathroom, the second is how to lessen saniaty ware size and the third is how to decrease the amount of ware and furniture. Let’s look at these options in order.

The first case the possibility enlarging the bathroom. How do perform it if the neighbors don’t want to share with their area? If there several toilets in the apartment, it is worth sacrificing one to increase the area of the bathroom. Very often, such a combination makes it possible to substantially increase the usable area. But there are a couple of nuances that should be considered. Firstly, if the wall between the toilet and bath is bearing, any performance with it will be strictly prohibited. Secondly, it is necessary to coordinate such a reconfiguration.

The second option is to reduction of the size of sanitary ware or selection of combined options. For example, mounted (console) toilet takes something about 30 cm less space than usual. The same situation is with a bidet – mounted option frees another 30 cm. But note that for ease of the use of the toilet or bidet there should be free space of about 50-60 cm on front of the unit and 20-40 cm on the sides. It’s also possible to replace the bidet with a hygienic shower, which also gives space saving effect. Or you can buy a toilet combined with bidet.

If your family members really want a shower, and you can not refuse a big bathtub, then set the combined version. Such bath-shower greatly reduce occupied area. But if you decide to install a shower stall, then aside a corner for it. Corner models with sliding doors are something that is suitable for a small bathroom.

Washing machine also requires a separate place. It is not the smallest item in the bathroom, but it’s difficult to manage without it. Do not purchase a large washing machine, especially if you do not have a big family. Or you can try to place the washing machine under the sink – it also safes a lot of space.

Heated towel rail can be placed partly over the bathtub or above the washing machine. The boiler is often placed in niches or above the toilet. The only thing you can not to refuse yourself is the size of mirror. It is flat and increases the room visually, like nothing else.

In the presence of a small bathroom is not necessary to use bulky wall cabinets. It is better to use a transparent glass shelves. And indeed all the furniture should be as small as possible, as it were a toy. Small-sized objects increase the room, not just those that take up less space, but also visually.

And only after the bath was designed “on paper” and experts gave the green light for such a placement of plumbing devices, you can begin to purchase new equipment and furniture.

Dynamic illumination system automatically determines the temperature of water and switches the appropriate lighting. At a temperature below 32 degrees Celsius illumination will be green, from 32 to 41 – blue, from 41 to 45 – the red, and in order to prevent you from burning yourself with hot water, illumination will blink red when the temperature is greater than 45 degrees. There are LED lights built into the nozzle shower – it is them who give the colored lighting. LED nozzle will help to determine the temperature of water literally by eye, not thrusting your hand under the stream and not quarreling at suddenly gamy mixer. Also, LED nozzle won’t remain without attention with children. Taking the shower will turn into a colorful event for them. Such nozzle requires no wiring and even batteries to be working. Energy for powering high-brightness LEDs is produced by built-in micro-turbines.

Before operating the color shower, make sure that all safety measures are met. In addition, it would be better if all the electrical work for installing such shower would be carried out by experts.

In addition, all shower stalls have a lot of advantages:

Firstly, it is space saving. Small bathrooms are better predisposed to install shower stalls, because the area occupied by stall twice smaller than occupied by bathtub.

Secondly, it is safety. High-quality booth is made with the expectation of all possible traumatic situations while taking a shower. Plastic, which is not harmful to health, is taken as the basis Tempered glass, which is much stronger than the windshield, is used for doors and walls. If the door is broken, you can not cut yourself, because there won’t be any sharp pieces. Before committing to buying a shower you should check its durability and reliability.

Third, shower stalls have a variety of functions. In addition to a shower itself, a modern shower booth can equipped with a radio, telephone or even a sauna, if there is a cover for the detention of the pair.

Fourth, it is cautious attitude to health. Some shower stalls are designed for aromatherapy or inhalation. To carry out these functions, drops of oil are added in steam, and the cabin fills up a terrific flavor or medicine. In addition, there are booths made ​​for chromotherapy, which is able to establish emotional balance. Also, the shower stalls may be fully equipped with a very important function of massage, which helps you get relaxed and calm after heavy everyday life.

Fifth, there are a lot of ways to install a shower. Fully assembled models are shower cubicles, which include the lateral and posterior wall. Installing this system will allow to save space and get an excellent option for taking a shower. In addition, there are corner shower stalls, which will become indispensable equipment in the small bathroom.

The choice is up to the buyer and the right decision should be taken in accordance with the individual needs of each person.

Number of jets in various models is usually ranging from three to eight. They are arranged on the panel vertically in one, two or three rows. If you want to massage only one area of the body (such as neck) you can turn a single nozzle or group of nozzles above. If you turn all of them, they will influence several zone. Such a hydromassage is called circular and it’s very good for health. Jets make the main difference between hydromassage shower panel and the traditional shower stand.

The main modes of operation:

• Classic. Gentle whirlpool effect complements the traditional shower.
• Bracing. Pulsating jet is best option for a morning shower.
• Super-bracing. For those who didn’t get enough sleep, the cross massage will fit: intersecting jets from several (five or six) nozzles.
• Relaxing. Shower with soft jets, saturated with air, is good in the evening – after work or before bedtime.

The standard set of shower includes a shower, usually in two versions: the upper stationary bailer and hand on a flexible hose. Both may have several types of jets.

Most panels are made of acrylic and aluminum. Decorating can various. Just select: chrome, wood effect, stained glass, etc. All depends on the overall style of the bathroom.

Hydromassage panels and stands with mechanical control are always cheaper than with electronic one. In the first case the flow and water temperature is regulated manually by a lever or rotary valves (depending on the design of the mixer). In the second case, you need only to click on the indicator board. Typically, it shows all available options, and LEDs are used as indicators of their activation. Sometimes is possible to program the temperature of water, the source of its filing (with shower or jets) and the desired mode of operation.

Traditional rectangular variants now increasingly get more graceful shapes: panels are made curved or even “rounded”. There are special models for installation in a corner. Control knobs can be placed not only on the front of the plane, but also in special cavities on the sides. Pleasant trifles are also available: shelves for storing shampoos, sponges, comfortable seats, halogen or LED lamps, etc.

It’s quite easy to install hydromassage panel. It is only necessary to fasten the device on the wall with a few screws and plug the hidden bringing in. But it’s far more difficult to install a panel with electronic control and / or illumination. It must be grounded and connected to an electrical outlet. Moreover transformer, which is crucial, should remain inaccessible to spray and moisture.

But what should be preferred for equipping a bathroom? Sometimes it’s hard to make this choice. The bathtub and shower have their advantages each. Shower stalls combined with bathtub may solve this dilemma well.

Combined baths are the perfect option for those who are not ready to compromise in matters of personal comfort. Typically, a bath combined with shower is equipped with an impressive array of options. It can be equipped with hydromassage, foot massage, decorative illumination and even radio. The ability to use the model as a steam bathtub will be appreciated by lovers of bath treatment.

As a result, high-quality shower cubicle combined with bathtub can become a smart and functional solution for your home.

Most newfangled phenomenon in the design of shower nozzles and shower set – shower column. This is not a panel mounted on the wall. This is a metal column, inside which there is inflow, and it topped with a stationary shower nozzle of large diameter, and it can have different geometric shapes. The column can be additionally equipped with hand shower. Levers of the mixer are on a level that you are comfortable with.

Shower head in the process of evolution has undergone substantial changes. The very first shower heads would have caused us a smile: they look somewhat awkward and even ugly. Only recently, shower heads have begun to be designed. This has several causes. First, many modern bathtub are equipped with shower. And if the bath is modern, it is impossible to violate the harmony: shower head shall comply with standards. Secondly, today not only bathtubs with showers, but separate shower stalls are trendy. A bath is sometimes not even installed; it began to play a minor role.

Rod shower.

It recalls long-obsolete version: rigid pipe-rod, on which water is pumped from the mixer to watering. This type of shower heads now has a more modern form. Moreover, it is one of the most needed and popular. Such shower system is mounted on the wall. And, there are a variety of its types. Free-standing floor version is one of them.

Rods look quite elegant. There are massive waterings of large diameter on the end of such rods. Waterings themselves can also have a variety of shapes: dome-shaped, almost flat, round and very rare – rectangular. Manufacturers provide them with system of protection to prevent occurrence of limescale deposits. Outlet openings of such a shower have a special arrangement that allows reaching a variety of massage effects.

Rotary showers.

Frequently rotary showers are used as the upper stationary watering. Previously, this shower was just a part of equipping of multifunctional shower booths. Now it has acquired an independent form. Its location can be either ceiling or wall. Rotary showers consists of a metal propeller with many blades, pierced by many small holes, which spins under pressure of water jets. With this design, the water forms a variety of ribbons or spirals, which provides a massaging effect. Appearance of rotary shower is quite unusual and interesting. Therefore it brings not only a functional value, but also serves as a decoration of bathroom. But, unfortunately, experts recommend complete this showers with usual one. They believe that it is more suitable for a massage or a warming effect, but not to washing.

Cascade shower.

Choosing such shower, you will definitely appreciate it. It is designed for sophisticated connoisseurs. Cascade shower will warm you with water jets from soft and caressing to the simulations of a small waterfall. Yes, a waterfall! More than a hundred liters of water can be pumped through a cascade of in one minute.

Chandelier shower.

Modern deluxe bathrooms are usually equipped with such showers. The name speaks for itself: a shower is very similar to a chandelier. For example, it might be a chandelier, consisting of two sections, each with a diameter of almost 30 cm. And, since the title has the word “chandelier”, then of course, this shower has a spectacular illumination.

Stationary shower.

This type of shower has complex mobile joints, which help to change the angle of the direction of the jet directly at the end of the body. Water jets will give you unforgettable pleasure when they join.

Remember, no matter what type of shower you choose, the reliability and functional advantages of a shower nozzle are the most important features. And of course do not forget about the design: let the shower be the mean of decorating your bathroom.

Catalog Number: EHK980RB
Finish: OIL RUBBED BRONZE

Secures Shower Enclosure Not Going to Ceiling
Allows Horizontal (Side-to-Side) Adjustment of Hinge After Installation
No Hole Drilling Required Through Header or Adaptor, if Using Prima Hinge Model PPH06 or Senior Prima Hinge Model SRPPH06
Constructed of Heavy 6063-T5 Aluminum Alloy
For Use With 5/16″, 3/8″, and 1/2″ (8, 10, and 12 mm) Thick Glass

The CRL EZ-Adjust Shower Door Header Kit provides a safe and beautiful frameless shower installation by securing enclosures that do not reach the ceiling. Acting as a “crown” over the top of the glass, the EZ-Adjust Shower Door Header Kit is bracketed to each wall. The EZ-Adjust System allows adjustability after installation in that the hinge (PPH06 and SRPPH06 only) can be moved left and right as desired. No drilling through the Header is required for an Adaptor Block if Using Prima Hinge Model PPH06 or Senior Prima Hinge Model SRPPH06, due to a built-in adaptation to the hinges. Constructed of heavy 6063-T5 aluminum alloy, the EZ-Adjust Header Kit is stocked in several popular finishes. A choice of 98 and 144 inch (2.49 and 3.66 meters) stock lengths allow the user to cut as desired. A Snap-In Filler Insert for the door pocket, along with Wall Mounting Brackets and Clear Glazing Vinyl round out the Kit.
Finishes:

Secures Shower Enclosure Not Going to Ceiling
Allows Horizontal (Side-to-Side) Adjustment of Hinge After Installation
No Hole Drilling Required Through Header or Adaptor, if Using Prima Hinge Model PPH06 or Senior Prima Hinge Model SRPPH06
Constructed of Heavy 6063-T5 Aluminum Alloy
For Use With 5/16″, 3/8″, and 1/2″ (8, 10, and 12 mm) Thick Glass

The CRL EZ-Adjust Shower Door Header Kit provides a safe and beautiful frameless shower installation by securing enclosures that do not reach the ceiling. Acting as a “crown” over the top of the glass, the EZ-Adjust Shower Door Header Kit is bracketed to each wall. The EZ-Adjust System allows adjustability after installation in that the hinge (PPH06 and SRPPH06 only) can be moved left and right as desired. No drilling through the Header is required for an Adaptor Block if Using Prima Hinge Model PPH06 or Senior Prima Hinge Model SRPPH06, due to a built-in adaptation to the hinges. Constructed of heavy 6063-T5 aluminum alloy, the EZ-Adjust Header Kit is stocked in several popular finishes. A choice of 98 and 144 inch (2.49 and 3.66 meters) stock lengths allow the user to cut as desired. A Snap-In Filler Insert for the door pocket, along with Wall Mounting Brackets and Clear Glazing Vinyl round out the Kit.
Finishes:

For 3/8″ and 1/2″ (10 and 12 mm) Tempered Glass
Available in Several Finishes
Sold in 12’ Stock Lengths

This CRL Apollo Style Header is a unique, heavy profile which provides maximum strength and unmatched beauty to the traditional shower enclosure.
Finishes:

Catalog Number: 3800032
Finish: GOLD

For 3/8″ & 1/2″ (10 & 12 mm) Tempered Glass
Available in Several Finishes
Sold in 12’ Stock Lengths

This CRL Euro Style Header has slick, smooth styling makes the Euro Header the high fashion choice for today’s up-to-date, contemporary bathrooms.

Finishes:

Available in Several Finishes
This is a Separately Sold Header Extrusion Bar Only for the CRL Header Kit

This extrusion bar is a component part only of a complete CRL Header Kit. To see the entire Kit that this part comes from, enter the same part number as this one in the Search Box, but delete EXT from the end of the Catalog Number.

Finishes:

Acts as a Decorative Crown Over Shower Enclosure to Secure Fixed Panels of Glass Not Going All the Way to the Ceiling
Available in Three Standard Lengths
Choice of Profiles: Round on One Side and Flat on the Other, or Flat on Both Sides of Header
Includes Snap-In Filler for Door Pocket, Wall Mounting Brackets, and Appropriate Vinyl for Snug Fit of Glass

The CRL Deluxe Header Only will provide additional support and a level of safety while securing glass panels not reaching the ceiling. Deluxe Header Kits are designed to allow installers to do in-house fabrication using a selection of component parts. Sold in 66, 98 and 144 inch (1676, 2489 and 3657 millimeter) lengths, the double profile extrusion has a narrow 1-1/4 inch (31.8 millimeter) face to minimize the visible sight line. A choice of facing edges (round or flat with mitered edges) is possible by simply reversing the extrusion. 90º, 135º or Adjustable Corners are sold separately. Also Available is a special Adapter Block for use on pivot hinge installations. A 2-1/4 inch (57.2 millimeter) Blank Mounting Bracket is offered for installations when the Header does not meet the wall at 90º, and the standard Wall Mounting Brackets cannot be used. Header is constructed of aluminum alloy 6463. This Header is adaptable to Senior Prima or Prima Hinges, Junior Prima Hinges should be used with the Junior Header Kit.

Finishes:

Catalog Number: SDH660BAEXT
Finish: BRITE ANODIZED

Available in Several Finishes
This is a Separately Sold Header Extrusion Bar Only for the CRL Header Kit

This extrusion bar is a component part only of a complete CRL Header Kit. To see the entire Kit that this part comes from, enter the same part number as this one in the Search Box, but delete EXT from the end of the Catalog Number.

Finishes:

Acts as a Decorative Crown Over Shower Enclosure to Secure Fixed Panels of Glass Not Going All the Way to the Ceiling
Available in Three Standard Lengths
Choice of Profiles: Round on One Side and Flat on the Other, or Flat on Both Sides of Header
Includes Snap-In Filler for Door Pocket, Wall Mounting Brackets, and Appropriate Vinyl for Snug Fit of Glass

The CRL Deluxe Header Kit will provide additional support and a level of safety while securing glass panels not reaching the ceiling. Deluxe Header Kits are designed to allow installers to do in-house fabrication using a selection of component parts. Sold in 66, 98 and 144 inch (1676, 2489 and 3657 millimeter) lengths, the double profile extrusion has a narrow 1-1/4 inch (31.8 millimeter) face to minimize the visible sight line. A choice of facing edges (round or flat with mitered edges) is possible by simply reversing the extrusion. 90º, 135º or Adjustable Corners are sold separately. Also Available is a special Adapter Block for use on pivot hinge installations. A 2-1/4 inch (57.2 millimeter) Blank Mounting Bracket is offered for installations when the Header does not meet the wall at 90º, and the standard Wall Mounting Brackets cannot be used. Header is constructed of aluminum alloy 6463. This Header Kit is adaptable to Senior Prima or Prima Hinges, Junior Prima Hinges should be used with the Junior Header Kit.

Finishes:

Available in Several Finishes
This is a Separately Sold Header Extrusion Bar Only for the CRL Header Kit

This extrusion bar is a component part only of a complete CRL Header Kit. To see the entire Kit that this part comes from, enter the same part number as this one in the Search Box, but delete EXT from the end of the Catalog Number.

Finishes:

Acts as a Decorative Crown Over Shower Enclosure to Secure Fixed Panels of Glass Not Going All the Way to the Ceiling
Available in Three Standard Lengths
Choice of Profiles: Round on One Side and Flat on the Other, or Flat on Both Sides of Header
Includes Snap-In Filler for Door Pocket, Wall Mounting Brackets, and Appropriate Vinyl for Snug Fit of Glass

The CRL Deluxe Header Kit will provide additional support and a level of safety while securing glass panels not reaching the ceiling. Deluxe Header Kits are designed to allow installers to do in-house fabrication using a selection of component parts. The extrusion has a narrow 1-1/4 inch (31.8 millimeter) face to minimize the visible sight line. 90º, 135º or Adjustable Corners are sold separately. Also Available is a special Adapter Block for use on pivot hinge installations. A 2-1/4 inch (57.2 millimeter) Blank Mounting Bracket is offered for installations when the Header does not meet the wall at 90º, and the standard Wall Mounting Brackets cannot be used. Header is constructed of aluminum alloy 6463. This Header Kit is adaptable to Senior Prima or Prima Hinges, Junior Prima Hinges should be used with the Junior Header Kit.
Finishes:

Available in Several Finishes
This is a Separately Sold Header Extrusion Bar Only for the CRL Header Kit

This CRL Deluxe Header Only will provide additional support and a level of safety while securing glass panels not reaching the ceiling. Deluxe Headers are designed to allow installers to do in-house fabrication using a selection of component parts. Sold in 66, 98 and 144 inch (1676, 2489 and 3657 millimeter) lengths, the double profile extrusion has a narrow 1-1/4 inch (31.8 millimeter) face to minimize the visible sight line. A choice of facing edges (round or flat with mitered edges) is possible by simply reversing the extrusion. 90º, 135º or Adjustable Corners are sold separately. Also Available is a special Adapter Block for use on pivot hinge installations. A 2-1/4 inch (57.2 millimeter) Blank Mounting Bracket is offered for installations when the Header does not meet the wall at 90º, and the standard Wall Mounting Brackets cannot be used. Header is constructed of aluminum alloy 6463. This Header is adaptable to Senior Prima or Prima Hinges, Junior Prima Hinges should be used with the Junior Header.
Finishes:

Acts as a Decorative Crown Over Shower Enclosure to Secure Fixed Panels of Glass Not Going All the Way to the Ceiling
Available in Three Standard Lengths
Choice of Profiles: Round on One Side and Flat on the Other, or Flat on Both Sides of Header
Includes Snap-In Filler for Door Pocket, Wall Mounting Brackets, and Appropriate Vinyl for Snug Fit of Glass

The CRL Deluxe Header Kit will provide additional support and a level of safety while securing glass panels not reaching the ceiling. Deluxe Header Kits are designed to allow installers to do in-house fabrication using a selection of component parts. Sold in 66, 98 and 144 inch (1676, 2489 and 3657 millimeter) lengths, the double profile extrusion has a narrow 1-1/4 inch (31.8 millimeter) face to minimize the visible sight line. A choice of facing edges (round or flat with mitered edges) is possible by simply reversing the extrusion. 90º, 135º or Adjustable Corners are sold separately. Also Available is a special Adapter Block for use on pivot hinge installations. A 2-1/4 inch (57.2 millimeter) Blank Mounting Bracket is offered for installations when the Header does not meet the wall at 90º, and the standard Wall Mounting Brackets cannot be used. Header is constructed of aluminum alloy 6463. This Header Kit is adaptable to Senior Prima or Prima Hinges, Junior Prima Hinges should be used with the Junior Header Kit.

Finishes:

For Use Only with SDH980, SDH660, and SDH144 Deluxe Header Kits

These CRL Brass Wall Mounting Brackets for Prima, Rondo or Shell Hinges are used with our Deluxe Header Kits. Two brackets and screws per package.

Finishes:

Screws Provided
Slides Neatly Into the “T” Slot in the Top of Our Deluxe Header
Available in 90 Degree, 135 Degree, and Adjustable Corners

These CRL Brass Adjustable Aluminum Corners are used with our Deluxe Header Kits. Screws are included with each corner purchased.

Finishes:

Allows Hinges to be Mounted Into Deluxe Header Kits
Fits Senior Prima, and Senior Cardiff Series Pivot Hinges
Available in Several Finishes

This CRL Senior Adapter Block is commonly used with the Senior Prima (not Junior or Regular series), and Senior Cardiff Series of hinges. The Senior Adapter Block allows the hinge to be mounted directly into the Shower Deluxe Header Assembly and can be adjusted sideways to any position required. The Adapter Block has a clearance notch which allows it to fit under the wall bracket when the hinge is mounted close to a wall. A drilled 1/4 inch (6 millimeter) hole in the header is required for installation and the hinge base plate must be removed to mount the hinge to the header. Each Senior Adapter Block is individually packed with a screw.

Finishes:

Allows Hinges to be Mounted Into Deluxe Header Kits
Fits Prima, Cardiff, Shell and Rondo Series Pivot Hinges
Available in Several Finishes

This CRL Adapter Block is commonly used with the Prima (not Junior or Senior series), Cardiff, Shell, and Rondo Series of hinges. The Adapter Block allows the hinge to be mounted directly into the Shower Deluxe Header Assembly and can be adjusted sideways to any position required. The Adapter Block has a clearance notch which allows it to fit under the wall bracket when the hinge is mounted close to a wall. A drilled 3/16 inch (5 millimeter) hole in the header is required for installation and the hinge base plate must be removed to mount the hinge to the header. Each Adapter Block is individually packed with a screw.

Finishes:

For Wall Mount Application

This CRL 90º End Mount Header Bracket can be used with our Junior Header Kits.

Finishes:

For Use With the Deluxe Header Kits

The CRL Clear Deluxe Header Vinyl is used with our Deluxe Header Kits. CRL offers replacement vinyl if you want to keep extra on hand. Appropriate lengths of vinyl for 1/4 and 5/16 inch (6 and 8 millimeters) glass are also offered. All are sold in increments of eight feet. Minimum order is eight feet.

Finishes:

For Use With the Deluxe Header Kits

The CRL Clear Deluxe Header Vinyl is used with our Deluxe Header Kits. CRL offers replacement vinyl if you want to keep extra on hand. Appropriate lengths of vinyl for 5/16 and 3/8 inch (8 and 10 millimeters) glass are also offered. All are sold in increments of eight feet. Minimum order is eight feet.

Finishes:

Screws Provided
Slides Neatly Into the “T” Slot in the Top of Our Deluxe Header
Available in 90 Degree, 135 Degree, and Adjustable Corners

These CRL Adjustable Aluminum Corners are used with our Deluxe Header Kits. Screws are included with each corner purchased.

Finishes:

Screws Provided
Slides Neatly Into the “T” Slot in the Top of Our Deluxe Header
Available in 90 Degree, 135 Degree, and Adjustable Corners

These CRL Brass 135º Aluminum Corners are used with our Deluxe Header Kits. Screws are included with each corner purchased.

Finishes:

Package of Two
Same Bracket That is Included in Every Deluxe Header Kit

These CRL Standard Wall Mounting Brackets come standard with each Deluxe Shower Door Header Kit purchased. But make sure to keep a few extras on hand just in case!
Finishes:

For Shower Door Deluxe Headers
Make Your Own Angles With This Blank Bracket

This CRL 2-1/4″ Aluminum Blank Mounting Bracket is used with our Shower Door Headers when the Header does not meet the wall at a typical 90 degrees and standard wall mounting brackets will not work. Make this Blank Wall Mounting Bracket any angle by identifying the angle needed in the field and fabricating the bracket accordingly. Simple scribing, cutting, and filing will make this bracket exactly what you need to attach to the “off-angle” wall. Sold individually.
Finishes:

Replacement Vinyl for Cat. No. DUC38 Dry Glaze U-Channels
Clear Vinyl Secures Glass in Channel and Eliminate the Need for Messy Silicone
Two Pieces Available: Flexible and Rigid

The CRL Flexible Vinyl is inserted into Cat. No. DUC38 U-Channel on the interior of the shower, while the CRL Rigid Leg Vinyl is inserted into the U-Channel on the exterior side. Minimum order is one each. A Packing Charge will be added to orders of fewer than 10 combined lengths.

Finishes:

Clear Vinyl Secures Glass in Channel and Eliminate the Need for Messy Silicone
Recess in Bottom Channel Hides Caulk Line
Channel and Matching End Caps Available in Several Popular Finishes

Dry Glaze U-Channel offers the installer many benefits. It eliminates the need for messy silicone between the glass and metal, dramatically reducing installation time. If the glass is ever scratched or damaged it can be removed without the need to cut out the sealant. The extruded aluminum channel is wrapped in a protective poly sleeve with two pieces of clear vinyl to secure 3/8″ (10 mm) glass. The “Flexible” Vinyl goes on the interior of the shower, while the “Rigid Leg” Vinyl “rolls in” on the exterior side. Matching finish End Caps adhere to channel ends, and must be ordered separately.

Finishes:

Wet Glazed With Clear Silicone to Secure Fixed Panels of Glass
Lower Profile Allows Maximum Glass Exposure
Popular 98″ (2.49 m) Stock Lengths

This CRL Regular U-Channel has a low profile. The 3/8 inch (9.5 millimeter) height allows for maximum glass exposure. Most commonly used on the bottom and side of fixed panels, while the Deep U-Channel is commonly used on top for maximum coverage. Cat. No. 33SMRC Mildew Resistant Clear Silicone is used to secure glass in the channel.

Finishes:

Wet Glazed With Clear Silicone to Secure Fixed Panels of Glass
Lower Profile Allows Maximum Glass Exposure
Popular 98″ (2.49 m) Stock Lengths

This CRL Regular U-Channel has a low profile. The 3/8 inch (9.5 millimeter) height allows for maximum glass exposure. Most commonly used on the bottom and side of fixed panels, while the Deep U-Channel is commonly used on top for maximum coverage. Cat. No. 33SMRC Mildew Resistant Clear Silicone is used to secure glass in the channel.
Finishes:

Deep Pocket Does Excellent Job of Securing Fixed Panels of Glass
Wet Glazed With Clear Silicone to Secure Glass
Popular 98″ (2.49 m) or 144″ (3.66 m) Stock Lengths
End Caps Offered to Conceal Ends of Channel
May Be Used Alone or With Regular Depth U-Channel

This 3/4 inch (19 millimeter) tall profile CRL Deep U-Channel is used for securing fixed panels of glass to the wall, ceiling or floor. Widths suitable for 3/8 and 1/2 inch (10 and 12 millimeter) thick glass are available, and are individually wrapped to protect the finish. The 3/4 inch (19 millimeter) tall profile Deep U-Channel can be used also as the top channel in installations where the glass must be inserted into the top, then lowered into the Regular U-Channel used at the bottom of the enclosure. 144 inch (3.66 meter) stock length.

Finishes:

Deep Pocket Does Excellent Job of Securing Fixed Panels of Glass
May Be Used Alone or With Regular Depth U-Channel
Wet Glazed With Clear Silicone to Secure Glass
All Available in Popular 98″ (2.49 m) Lengths, Some Available in Economical 144″ (3.66 m) Stock Lengths
End Caps Offered to Conceal Ends of Channel

Deep U-Channel is for securing fixed panels of glass to the wall, ceiling or floor. Widths suitable for 3/8 and 1/2 inch (10 and 12 millimeter) thick glass are available, and are individually wrapped to protect the finish. The 3/4 inch (19 millimeter) tall profile Deep U-Channel can be used also as the top channel in installations where the glass must be inserted into the top, then lowered into the Regular U-Channel used at the bottom of the enclosure. Over a dozen stock finishes are offered.

Finishes:

Deep Pocket Does Excellent Job of Securing Fixed Panels of Glass
Wet Glazed With Clear Silicone to Secure Glass
Popular 98″ (2.49 m) or 144″ (3.66 m) Stock Lengths
End Caps Offered to Conceal Ends of Channel
May Be Used Alone or With Regular Depth U-Channel

This 3/4 inch (19 millimeter) tall profile CRL Deep U-Channel is used for securing fixed panels of glass to the wall, ceiling or floor. Widths suitable for 3/8 and 1/2 inch (10 and 12 millimeter) thick glass are available, and are individually wrapped to protect the finish. The 3/4 inch (19 millimeter) tall profile Deep U-Channel can be used also as the top channel in installations where the glass must be inserted into the top, then lowered into the Regular U-Channel used at the bottom of the enclosure. 144 inch (3.66 meter) stock length.

Finishes:

Deep Pocket Does Excellent Job of Securing Fixed Panels of Glass
May Be Used Alone or With Regular Depth U-Channel
Wet Glazed With Clear Silicone to Secure Glass
All Available in Popular 98″ (2.49 m) Lengths, Some Available in Economical 144″ (3.66 m) Stock Lengths
End Caps Offered to Conceal Ends of Channel

Deep U-Channel is for securing fixed panels of glass to the wall, ceiling or floor. Widths suitable for 3/8 and 1/2 inch (10 and 12 millimeter) thick glass are available, and are individually wrapped to protect the finish. The 3/4 inch (19 millimeter) tall profile Deep U-Channel can be used also as the top channel in installations where the glass must be inserted into the top, then lowered into the Regular U-Channel used at the bottom of the enclosure. Over a dozen stock finishes are offered.

Finishes:

For Use on Strike Side or Hinge Side of the Door Opening
Clear Vinyl Included With Each Set
Available in Several Popular Finishes

This extruded CRL Aluminum Jamb with Clear Vinyl Wipe provides water resistance when the door is closed. Clear Vinyl is included with each set. It can be used on the strike side of the door opening with any of our Frameless Shower Door Hinges. Also applicable to the hinge side when used with Top and Bottom Mount Pivot Hinges, such as the Prima, Senior Prima, Junior Prima, Cardiff, Shell and Rondo Series. Stock length is 78 inches (1.98 meters).
Finishes:

Aluminum Channel With Built-In Vinyl Wipe Fits Onto Bottom of Shower Door
Available in Several Finishes
Maintains Continuous Metal Sightline When Used on Door Next to Fixed Panels With Deep U-Channel

This door bottom mounted CRL U-Channel with Door Wipe has a 1/2 inch (12.7 millimeter) profile, which makes an even sight line when used next to a fixed panel glazed with Deep U-Channel on the bottom. While many will choose to use a clear wipe at the bottom of the shower door for an ‘all-glass’ look, others will want the continuous appearance of metal while using this Shower Door U-Channel With Wipe.

Finishes:

Aluminum Channel With Built-In Vinyl Wipe Fits Onto Bottom of Shower Door
Available in Several Finishes
Maintains Continuous Metal Sightline When Used on Door Next to Fixed Panels With Deep U-Channel

This door bottom mounted CRL U-Channel with Door Wipe has a 1/2 inch (12.7 millimeter) profile, which makes an even sight line when used next to a fixed panel glazed with Deep U-Channel on the bottom. While many will choose to use a clear wipe at the bottom of the shower door for an ‘all-glass’ look, others will want the continuous appearance of metal while using this Shower Door U-Channel With Wipe.

Finishes:

For Use With Junior Prima Hinges and Junior Header Kits Only

This CRL Junior Adapter Block is used with our Junior Prima Hinges and our Junior Header Kit. The Junior Header Kit for 1/4 inch (6 millimeter) glass provides support to shower enclosures not going all the way to the ceiling.

Finishes:

Kit Contains Everything Required for Installation
Secures Shower Enclosures Not Going All the Way to the Ceiling
Available in Several Finishes
Dual Profile Allows User Choice of Soft Rounded Side or Flat Side

The CRL Junior Header Kit for 1/4 inch (6 millimeter) thick glass provides support to shower enclosures not going all the way to the ceiling. Installers can do in-house or jobsite fabrication using the components provided.

Finishes:

36″ (914 mm) Replacement Snap-In Filler
Several Colors Available
Works With Junior Header

CRL 6 mm Junior Header Snap-In Filler is a 36 inch (914 millimeter) replacement piece that puts the finishing touch on the Junior Header. By simply press fitting the Filler into the Header directly above the door pocket, you create an even sightline of metal, and fill what would have been an unattractive Header pocket.
Finishes:

For Use With Apollo and Euro Headers

This CRL Snap-In Filler Strip snaps into header to fill in the pocket above the shower door, between the fixed panels. Vinyl fills 1/2 inch pocket when using 3/8 inch glass. For use with Apollo and Euro Headers. Filler strip snaps into header above door for a smooth, seamless look. Sold per length.

Finishes:

For Use With CRL Shower Door Deluxe Headers

A 36 inch (914 millimeter) piece of Snap-in-Filler is provided with each Deluxe Header Kit, and is also available for replacement in both 36 and 72 inch (914 and 1829 millimeter) lengths. Snap-in-Filler puts the finishing touch on the installation of the Deluxe Header. By simply press fitting the Filler into the Header directly above the door pocket, you create an even sightline of metal, and fill what would have been an unattractive Header pocket.

Finishes:

For Use With CRL Shower Door Deluxe Headers

A 36 inch (914 millimeter) piece of Snap-in-Filler is provided with each Deluxe Header Kit, and is also available for replacement in both 36 and 72 inch (914 and 1829 millimeter) lengths. Snap-in-Filler puts the finishing touch on the installation of the Deluxe Header. By simply press fitting the Filler into the Header directly above the door pocket, you create an even sightline of metal, and fill what would have been an unattractive Header pocket.

Finishes:

Available in Several Attractive Finishes
Covers Open End of SDCD12 and DUC38 Series U-Channels
Easy to Install

This CRL End Cap is designed to cover exposed ends of the Deep U-Channel to improve the beauty of your shower installation. Available in several attractive finishes, the End Caps are easily installed using a dab of Silicone.

Finishes:

Available in Several Attractive Finishes
Covers Open End of SDCD38 Series U-Channels
Easy to Install

This CRL End Cap is designed to cover exposed ends of the Deep U-Channel to improve the beauty of your shower installation. Available in three attractive finishes, the End Caps are easily installed using a dab of Silicone.

Finishes:

Available in Brite Silver and Brite Gold

This CRL Frameless Header is designed for use on 1/4 inch frameless glass units.

Finishes:

Available in 2 Finishes

This CRL 3/8″ Twin Roll Header is designed for use with sliding panels that have a total weight of 200 pounds or less.

Finishes:

Available in Several Colors

This CRL Twin Roll Header is designed for use with sliding panels that have a total weight of 135 pounds or less.

Finishes:

Available in Several Colors

This CRL Twin Roll Header is designed for use with sliding panels that have a total weight of 135 pounds or less.

Finishes:

Available in Several Finishes

This CRL Daylite Header is designed to be used with the standard framed style daylite unit.

Finishes:

Available in 98″ or 15’0″ (2.5 or 4.6 m) Lengths

This CRL Standard Bottom Track is a classic design, for use with framed twin roll panels.

Finishes:

Available in 98″ or 15’0″ (2.5 or 4.6 m) Lengths

The CRL E-Z Clean Bottom Track can be used with either framed or 1/4 and 3/8 inch frameless track guides.

Finishes:

Available in 98″ or 15’0″ (2.5 or 4.6 m) Lengths

33sc, rtv408c, bl9934, at04512, 491014, 17600.

Finishes:

Available in 98″ or 11’10″ (2.5 or 3.6 m) Lengths

This CRL Magnetic 135º Post is for use with framed daylite units.

Finishes:

Available in 98″ or 11’10″ (2.5 or 3.6 m) Lengths

This CRL Magnetic 135º Post is for use with framed daylite units.

Finishes:

Available in 98″ or 11’10″ (2.5 or 3.6 m) Lengths

This CRL Magnetic 90º Post is for use with framed daylite units.

Finishes:

Available in 98″ or 11’10″ (2.5 or 3.6 m) Lengths

This CRL Magnetic 90º Post is for use with framed daylite units.

Finishes:

Available in 98″ or 11’10″ (2.5 or 3.6 m) Lengths

This CRL Universal Post is available in several finishes and lengths.

Finishes:

Available in 98″ or 11’10″ Lengths

This CRL Universal Post is available in several finishes and lengths.

Finishes:

Available in 98″ or 11′-10″ (2.5 or 3.6 m) Lengths

This CRL Standard Rail can be used as side rail on twin roll sliding enclosures and as top and bottom rail on doors and fixed panels.

Finishes:

Available in 98″ or 11’10″ Lengths

This CRL Standard Rail can be used as side rail on twin roll sliding enclosures and as top and bottom rail on doors and fixed panels.

Finishes:

Available in 98″ or 11’10″ (2.5 or 3.6 m) Lengths

This CRL Magnetic Rail is used as a side rail on magnetic closure doors.

Finishes:

Available in 98″ or 16’0″ (2.5 or 4.9 m) Lengths

This CRL Hanger Rail is used as the top rail on twin roll sliding door units. The mounting slot on the top allows for the mounting of a roller bracket.

Finishes:

Available in 98″ or 16’0″ (2.5 or 4.9 m) Lengths

This CRL Hanger Rail is used as the top rail on twin roll sliding door units. The mounting slot on the top allows for the mounting of a roller bracket.

Finishes:

Available in 98″ or 16’0″ (2.5 or 4.9 m) Lengths

This CRL E-Z Clean Rail is used as a bottom rail on twin roll sliding door sets, the E-Z Clean rail has a guide slot in it for use with E-Z Clean bottom track and track guide 3801007.

Finishes:

Available in 98″ or 16’0″ (2.5 or 4.9 m) Lengths

This CRL E-Z Clean Rail is used as a bottom rail on twin roll sliding door sets, the E-Z Clean rail has a guide slot in it for use with E-Z Clean bottom track and track guide 3801007.

Finishes:

Available in 98″ or 12’0″ (2.5 or 3.6 m) Lengths

This CRL Frameless Adapter Rail is used as wall jamb and bottom rail for fixed panels in 1/4 inch dual configuration kits. Panels are wet glazed using clear setting blocks and clear silicone.

Finishes:

Assists Watershed Back Into Shower
Perfect for Flat or Out-Sloping Curbs

This CRL Shower Door Threshold is mounted directly below the shower door to let the water drain back into the shower stall. Ideal for flat or out-sloping curbs. The rounded low contour on the Half Round Threshold will not harm feet. The Tapered Style Sill leaves a minimal sightline from the exterior of the shower. Thresholds may be used in conjunction with a bottom sweep.

Finishes:

Assists Watershed Back Into Shower
Perfect for Flat or Out-Sloping Curbs

These CRL Shower Door Thresholds are mounted directly below the shower door to let the water drain back into the shower stall. Ideal for flat or out-sloping curbs. The rounded low contour of the Half Round Threshold will not harm feet. The Tapered Style Sill leaves a minimal sightline from the exterior of the shower. These thresholds may be used in conjunction with a bottom sweep. Use Mildew Resistant Silicone Sealant to adhere to curb of shower stall.

Finishes:

Available in 98″ or 12’0″ (2.5 or 3.6 m) Lengths

This CRL Twin Roll Wall Jamb is used as the upright wall receiver for the sliding panels.

Finishes:

Available in 98″ or 12’0″ (2.5 or 3.6 m) Lengths

This CRL Twin Roll Wall Jamb is used as the upright wall receiver for the sliding panels.

Finishes:

Available in 98″ or 16’0″ (2.5 or 4.9 m) Lengths

This CRL Pivot Bottom Jamb is available in several finishes and lengths.

Finishes:

Available in 98″ or 16’0″ (2.5 or 4.9 m) Lengths

This CRL Pivot Wall Jamb is used with a pivot bracket and retainer set catalog number 3801019 or 3801031.

Finishes:

Available in 98″ or 11’10″ (2.5 or 3.6 m) Lengths

This CRL Magnetic Fill Jamb slips on to a side rail.

Finishes:

Available in 98″ or 11’10″ (2.5 or 3.6 m) Lengths

This CRL Magnetic Fill Jamb slips on to a side rail.

Finishes:

Available in 98″ or 12’0″ (2.5 or 3.6 m) Lengths

This CRL Magnetic Strike Jamb is for use on glass-to-glass closures. This extrusion will bond to 1/4 inch glass only. There is an insert groove for a magnet.

Finishes:

Available in 98″ or 12’0″ (2.5 or 3.6 m) Lengths

This CRL Magnetic Strike Jamb is for use on glass-to-glass closures. This extrusion will bond to 1/4 inch glass only. There is an insert groove for a magnet.

Finishes:

Available in 98″ or 16’0″ (2.5 or 4.9 m) Lengths

This CRL Magnetic Strike Jamb is used for wall mounting.

Finishes:

Available in 98″ or 16’0″ (2.5 or 4.9 m) Lengths

This CRL Magnetic Strike Jamb is used for wall mounting.
Finishes:

Available in 98″ or 16’0″ (2.5 or 4.9 m) Lengths

This CRL Narrow Bottom Jamb comes in several colors and different lengths.
Finishes:

Available in 98″ and 12′ (2.5 and 3.6 m) Lengths in Several Finishes

This CRL Curb U-Channel is for use on frameless units.
Finishes:

Available in 98″ (2.5 m) Lengths and Several Finishes

This CRL Curb U-Channel is for use on frameless units.
Finishes:

Available in 98″ or 10′ (2.5 or 3 m) Lengths

This CRL 2″ High U-Channel Filler Stock is available in several finishes and lengths.

Finishes:

Available in 98″ or 10′ (2.5 or 3 m) Lengths

This CRL 2″ High U-Channel Filler Stock is available in several finishes and lengths.

Finishes:

Many Beautiful Finishes
Self-Centering With Reversible 5 Degree Pivot Pin
Custom Pivot Pin Available
Three Year Warranty

The CRL Roman 045 Series 135 Degrees Glass-to-Glass Hinges are able to accommodate 5/16 to 1/2 inch (8 to 12 millimeter) glass. Roman Hinges are self-centering, and contain a reversible 5 Degree Pivot Pin. In addition, Custom Pivot Pins are available to accommodate “off angle” installations. Made of solid brass with all moving parts (pins and springs) in stainless steel.

Finishes:

Accommodates 3/8″ to 1/2″ (10 to 12 mm) Glass
Available in Many Beautiful Finishes
Three Year Warranty

The CRL Cologne Series of professional hinges is designed to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. Available in both Wall Mount and Glass-to-Glass styles, it provides design flexibility. Cologne Series Hinges are constructed of solid brass with all moving parts (pins and springs) in stainless steel. Two strategically placed pins inside the hinge provide template options, and satisfy two schools of thought for mounting shower door hinges. It allows the Cologne Hinge to be used with it’s own CRL “mouse-ears” cut-out, or in some cases fit competitive “mouse-ear” cut-outs. On the other hand, to enable increased adjustability, the two pins can be removed which allows the Cologne Hinge to fit it’s own CRL rectangular shape, square cornered cut-out, or in some cases, fit competitive rectangular shaped, square cornered cut-outs.
Finishes:

135 Degree Glass-to-Glass, Self-Centering with Optional 5 Degree Pivot Pin Set
3 Year Warranty
U.S. Patent 5297313
Available in Several Beautiful Finishes

The CRL Prima Series of professional hinges is able to accommodate 5/16 to 3/8 inch (8 to 10 millimeter) tempered safety glass. A variety of four styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Prima Hinges are self-centering, with four springs for maximum retention strength. Optional 5 Degree Pivot Pin Sets are available to accommodate “off angle” installations. Some advantages of pivot type hinges include the fact that they carry the majority of the weight on the bottom, and have the ability to be inset from the wall, enabling clearance for towel bars and other projections.

Finishes:

135 Degree Glass-to-Glass, Self-Centering with Optional 5 Degree Pivot Pin Set
3 Year Warranty
U.S. Patent 5297313
Available in Several Beautiful Finishes

The CRL Prima Series of professional hinges is able to accommodate 5/16 to 3/8 inch (8 to 10 millimeter) tempered safety glass. A variety of four styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Prima Hinges are self-centering, with four springs for maximum retention strength. Optional 5 Degree Pivot Pin Sets are available to accommodate “off angle” installations. Some advantages of pivot type hinges include the fact that they carry the majority of the weight on the bottom, and have the ability to be inset from the wall, enabling clearance for towel bars and other projections.

Finishes:

Self-Centering with Reversible 5 Degree Pivot Pin
Custom Pivot Pin Available
Available in Several Beautiful Finishes
3 Year Warranty

These new CRL Geneva 045 Series 135 Degree Glass-to-Glass Hinges are used in conjunction with the appropriate Geneva Pony Wall Mount Hinge for a 135 Degree angle. Geneva Hinges are self-centering, and contain a reversible 5 Degree Pivot Pin. In addition, Custom Pivot Pins are available to accommodate “off angle” installations. Made of solid brass with all moving parts (pins and springs) in stainless steel.

Finishes:

Self-Centering with Reversible 5 Degrees Pivot Pin with Custom Pivot Pin Available
Available in Several Beautiful Finishes
3 Year Warranty

These new CRL Geneva 135 Degrees Glass-to-Glass Hinges are used in conjunction with the appropriate Geneva Pony Wall Mount Hinge for a 135 Degrees angle. Geneva Hinges are self-centering, and contain a reversible 5 Degree Pivot Pin. In addition, Custom Pivot Pins are available to accommodate “off angle” installations. Made of solid brass with all moving parts (pins and springs) in stainless steel.

Finishes:

Adjustable to Any Angle Up To 90 Degrees Without Removing Door
Available in Several Beautiful Finishes
3 Year Warranty

The CRL Pinnacle Adjustable Series of professional hinges is able to accommodate 5/16 to 1/2 inch (8 to 12 millimeter) tempered safety glass. A variety of two styles, Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Pinnacle Adjustable Series has taken our popular Pinnacle Series to a new level. Adjustment to accommodate the angle desired (up to 90 degrees) is done after the door is installed. Once the door is hung, simply loosen the allen screws and turn the door to the desired closed position. Tighten the Allen screws in the new self-centering location. The door can swing 90 degrees inwards and outwards (adjusting angle from factory set position will reduce 90 degrees swing in that direction). For doors pulling outwards only (using a clear door jamb), you can adjust the hinge to close 5 degrees inside the shower area, thus having the door close snugly against the jamb.

Finishes:

Self-Centering with Reversible 5 Degree Pivot Pin
Available in Several Beautiful Finishes
Three Year Warranty

The CRL Pinnacle Series of professional hinges is able to accommodate 5/16 to 1/2 inch (8 to 12 millimeter) glass. A variety of six styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Pinnacle Hinges are self-centering, and contain a Reversible 5 Degree Pivot Pin. In addition, Custom Pivot Pins are available to accommodate “off angle” installations.

Finishes:

Accommodates 3/8″ to 1/2″ (10 to 12 mm) Glass
Available in Many Beautiful Finishes
Three Year Warranty

The CRL Vienna Series of professional hinges is designed to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. Available in both Wall Mount and Glass-to-Glass styles, it provides design flexibility. Vienna Series Hinges are constructed of solid brass with all moving parts (pins and springs) in stainless steel. Two strategically placed pins inside the hinge provide template options, and satisfy two schools of thought for mounting shower door hinges. This allows the Vienna Hinge to be used with it’s own CRL “mouse-ears” cut-out, or in some cases fit competitive “mouse-ears” cut-outs. On the other hand, to enable increased adjustability, the two pins can be removed. This allows the Vienna Hinge to fit it’s own CRL rectangular shape, square cornered cut-out, or in some cases, fit competitive rectangular shaped, square cornered cut-outs. An Optional Custom Pivot pin can be ordered to accommodate off angle installations.

Finishes:

A Great Alternative to Floor Closers and Patch Fittings
For Self-Closing Glass Doors From 3/8″ to 1/2″ (10 to 12 mm) Thick
Hold Open at 90 Degrees
Adjustable Closing Speed

Ideal for hermetic closing. Swings one way a full 90 degrees, with stops at 0º and 90º. Closing speed can be adjusted. For doors up to 39 inches (1 meter) wide. Maximum weight per two hinges is 220 pounds (100 kilograms). Minimum order is one each.

Finishes:

A Great Alternative to Floor Closers and Patch Fittings
For Self-Closing Glass Doors and Gates from 3/8″ to 1/2″ (10 to 12 mm) Thick
Adjustable Closing Speed

Swings in and out a full 90 degrees, with stops at 0º, +90º, and -90º. Closing speed can be adjusted. For doors up to 39 inches (1 meter) wide. Maximum weight per two hinges is 220 pounds (100 kilograms). Minimum order is one each.
Finishes:

A Great Alternative to Floor Closers and Patch Fittings
For Self-Closing Glass Doors and Gates from 3/8″ to 1/2″ (10 to 12 mm) Thick
Adjustable Closing Speed

Swings in and out a full 90 degrees, with stops at 0º, +90º, and -90º. Closing speed can be adjusted. For doors up to 39 inches (1 meter) wide. Maximum weight per two hinges is 220 pounds (100 kilograms). Minimum order is one each.

Finishes:

Catalog Number: 3802009
Finish: SILVER

#
Provides the Appearance of a Heavy Glass Unit While You Actually Supply Only 1/4″ (6 mm) Glass

This CRL Frameless Dual Configuration Enclosure Kit has two possible configurations:

Finishes:

Ideal for Bi-Fold Application
Available in Several Beautiful Finishes
10 Year Warranty
ZURICH hinges are unavailable for the German market (ZURICH Beschläge sind für den deutschen Markt nicht verfügbar!)

The CRL Zurich Series of professional hinges is able to accommodate 5/16 to 3/8 inch (8 to 10 millimeter) tempered safety glass. A variety of 6 styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. The Zurich Series was C.R.Laurence’s first offering of the popular bi-fold hinges. All six styles of Zurich Hinges feature stainless steel construction and are available in seven finishes. The brass finish is also available in solid brass construction with a protective coating. In addition, screws and washers are interchangeable for a special design accent. Only two holes per attachment are required, with no cut-out necessary.

Finishes:

Catalog Number: 3802006
Finish: SILVER

#
Provides Appearance of a Heavy Glass Unit While You Actually Supply Only 1/4″ (6 mm) Glass

This CRL Frameless Dual Configuration Enclosure Kit has two possible configurations:

Finishes:

Catalog Number: S386072BA
Finish: BRITE ANODIZED

#
New and Improved Roller System Provides Smooth Gliding Panels With the Touch of a Finger
#
Bonded Hanger System for Easy Installation
#
# Bolt-Through Hanger System Available on Special Order Custom Units Available

Our new CRL Frameless Double KD Slider Kits provide all the extrusions necessary for installation (header, top hanger rails, bottom track and side jambs), and include a 24 inch (610 millimeter) towel bar, knob, rollers, guide and installation hardware. The glass and silicone sealer are supplied by the installer. The easy to clean bottom track utilizes a center mounted guide. Available in custom sizes, configurations and finishes by contacting CRL Technical Sales.

Finishes:

Ideal for Bi-Fold Application
Available in Several Beautiful Finishes
10 Year Warranty
ZURICH hinges are unavailable for the German market (ZURICH Beschläge sind für den deutschen Markt nicht verfügbar!)

The CRL Zurich Series of professional hinges is able to accommodate 5/16 to 3/8 inch (8 to 10 millimeter) tempered safety glass. A variety of six styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. The Zurich Series was C.R.Laurence’s first offering of the popular bi-fold hinges. All six styles of Zurich Hinges feature stainless steel construction and are available in six finishes. The brass finish is also available in solid brass construction with a protective coating. In addition, screws and washers are interchangeable for a special design accent. Only two holes per attachment are required, with no cut-out necessary.

Finishes:

Catalog Number: S386060BA
Finish: BRITE ANODIZED

#
New and Improved Roller System Provides Smooth Gliding Panels With the Touch of a Finger
#
Bonded Hanger System for Easy Installation
#
# Bolt-Through Hanger System Available on Special Order Custom Units Available

Our new CRL Frameless Double Door KD Slider Kits provide all the extrusions necessary for installation (header, top hanger rails, bottom track and side jambs), and also include a 24 inch (610 millimeter) towel bar, knob, guide, rollers and installation hardware. The easy to clean bottom track utilizes a center mounted guide. Available in custom sizes, configurations and finishes by contacting CRL Technical Sales.

Finishes:

Our Spider Type Design for the Construction of Frameless Showers
Glass-to-Glass Model Has Settings at 90, 135 or 180 Degrees
Choice of Two Mounting Options: Glass-to-Glass and Glass-to-Wall
Constructed of 316 Stainless Steel in Your Choice of Brushed or Polished Finishes

For a new design in Frameless Shower Door Hinges, look no further than our Sydney Series. The unique “Spider Type” design is certain to give the frameless shower door a different look that will surely be noticed. Constructed of durable 316 stainless steel, Sydney Hinges are available in Wall-to- Glass and Glass-to-Glass models. The Glass-to-Glass model offers three settings at 90, 135, and 180 degrees. For doors falling in between these common installation angles, the springs may be removed to allow a “free-swinging” hinge. Two holes are required per hinge for each panel to accommodate the through-bolts, with no cut- cut necessary. The 316 stainless steel body of the Sydney Hinge allows the door to swing 90 degrees outward. Polished Stainless Steel and Brushed Stainless Steel finishes are offered.

Finishes:

Catalog Number: S146072BA
Finish: BRITE ANODIZED

#
New and Improved Roller System Provides Smooth Gliding Panels With the Touch of a Finger
#
Bonded Hanger System for Easy Installation
#
# Bolt-Through Hanger System Available on Special Order Custom Units Available

Our new CRL Frameless Double “MK” Series Slider Kits provide all the extrusions necessary for installation (header, top hanger rails, bottom track and side jambs), and include a 24 inch (610 millimeter) towel bar, knob, rollers, guide and installation hardware. The glass and silicone sealer are supplied by the installer. The easy to clean bottom track utilizes a center mounted guide. Available in custom sizes, configurations and finishes by contacting CRL Technical Sales.

Finishes:

For 3/8″ and 1/2″ (10 and 12 mm) Tempered Glass
Solid Forged Brass Hinges With Square Corners & Edges
Available in Several Finishes

The CRL Cicero Series Shower Door Hinge features precision machined stainless steel components with mouse ear design for added holding strength. The Cicero Series has the same timeless styling as the Anaheim hinge, but with clean, rounded corners and beveled edges. It is self closing from 25 degrees to self centering 0 degree return. (5 degree positive closure and 45 degree configurations available) An allen wrench is included with each hinge. This series hinge conservatively rated at 40 pounds per hinge.

Finishes:

Catalog Number: S146060BA
Finish: BRITE ANODIZED

#
New and Improved Roller System Provides Smooth Gliding Panels With the Touch of a Finger
#
Bonded Hanger System for Easy Installation
#
# Bolt-Through Hanger System Available on Special Order Custom Units Available

Our new CRL Frameless Double KD Slider Kits provide all the extrusions necessary for installation (header, top hanger rails, bottom track and side jambs), and include a 24 inch (610 millimeter) towel bar, knob, rollers, guide and installation hardware. The glass and silicone sealer are supplied by the installer. The easy to clean bottom track utilizes a center mounted guide. Available in custom sizes, configurations and finishes by contacting CRL Technical Sales.

Finishes:

Our Most Unique Design for the Construction of Frameless Showers
Set Doors at 90, 135, or 180 Degrees, or Anywhere In-Between
Constructed of Stainless Steel in Your Choice of Brushed or Polished Finishes
Fits 5/16″ (8 mm) and 3/8″ (10 mm) Thick Glass (Holes Required)
ARCTIC hinges are not available in Europe

This CRL Arctic Series Hinge is constructed of stainless steel, and is available in Glass-to-Glass and Glass-to-Wall models. Both are intended for use with 5/16 and 3/8 inch (8 and 10 millimeter) tempered safety glass. Neither requires that the glass be notched, only that each glass panel have two 1/2 inch (12 millimeter) holes drilled for the through-bolts. The body of the Arctic Hinge is all stainless steel with a pivot point that swings a full 180 degrees. Arctic gives you the option to set doors at 90, 135, or 180 degrees, or anywhere in-between. That’s a feature most other hinges can’t offer. If you’re looking for something new in frameless hinges, try the Arctic Series.

Finishes:

Catalog Number: DK68B

#
Designed for 3/8″ (10 mm) glass
#
Available in Brite Anodized/Brushed Nickel, Brite Gold Anodized, and Oil Rubbed Bronze Finishes

This CRL Hardware Package for Cottage Series Sliding Shower Kits is available in matching finishes. It includes: Screws, Bumpers and Plastic anchors.
Finishes:

For 3/8″ and 1/2″ (10 and 12 mm) Tempered Glass
Solid Forged Brass Hinges With Square Corners & Edges
Available in Several Finishes

The CRL Anaheim Series Shower Door Hinge features precision machined stainless steel components with mouse ear design for added holding strength. The versatile, adaptable styling of this hinge will compliment a traditional as well as a contemporary shower installation. This graceful simple design, besides being very functional, is also timeless. It is self closing from 25 degrees to self centering 0 degree return. (5 degree positive closure and 45 degree configurations available) An allen wrench is included with each hinge. This series hinge conservatively rated at 40 pounds per hinge.

Finishes:

Rounded Design Ideal for “Soft Decors”
Available in Several Beautiful Finishes
3 Year Warranty

The Berlin Series of professional hinges is able to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) tempered safety glass. A variety of 4 styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Berlin Series of Hinges combines elegant design with superb quality. This family of hinges features a Wall Mount Hinge with Offset Back Plate, which leaves the mounting plate visible only from inside the shower. Three Glass-to-Glass models round out the selection. Choose from several beautiful finishes which will match the decor of most bathrooms. Berlin Hinges are constructed of solid brass, and will provide a new inspiration combined with a classic past.

Finishes:

Self-Centering with Reversible 5 Degree Pivot Pin
Available in Several Beautiful Two-Tone Finishes
3 Year Warranty

CRL Junior Cathedral Series of professional hinges are able to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) glass. A variety of four styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. The Junior Cathedral Series Hinge blends a unique two-tone design with the same internal mechanism as our Junior Geneva Hinge. The Junior Cathedral has a positive hold on the glass, utilizing a cut-out plus a hole to prevent door slippage. Constructed of solid brass, they come in one Wall Mount and three Glass-to-Glass styles. They contain a Reversible Pivot Pin for optional 5 degree offset door closure. The Junior Cathedral is self-centering, and is available in several color blends.

Finishes:

Precise Closing Feature to Zero Degrees
Available in Several Beautiful Finishes
3 Year Warranty

The CRL Monaco Series introduces charm, richness and character to the choice of frameless shower door hinges using 1/4 to 5/16 inch (6 to 8 millimeter) safety glass. Available in two wall mount and four glass-to-glass styles, Monaco Hinges present numerous design and configuration options. Aesthetically pleasing beveled edges and corners give Monaco Hinges the look many architects and designers desire. Several standard finishes are stocked.

Finishes:

Catalog Number: DK6914

#
Designed for 1/4″ (6 mm) Glass

CRL Bottom Guide for CK/DK Cottage Series Sliders components add versatility to our Frameless Sliding Shower Door Kits, and allows you the option of adding additional panels to create a designer enclosure, or simply construct your own sliding unit by combining the various parts. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

Precise Closing Feature to Zero Degrees
Available in Several Beautiful Finishes
3 Year Warranty

The CRL Petite Series of professional hinges is able to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) tempered safety glass. A variety of three styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Petite Series provides a complete spectrum of hinges for frameless shower doors using 1/4 to 5/16 inch (6 to 8 millimeter) safety glass. Developed to allow virtually every application configuration, Petite Series Hinges deliver design freedom. Petite Hinges have mitered edges with curved corners to provide an aesthetically pleasing look. Petite Hinges have 25% thicker plates than competitive hinges, thereby reducing deflection and providing greater holding power.
Finishes:

Catalog Number: DK7080BA
Finish: BRITE ANODIZED

#
Simply Field Fabricate As Desired
#
Jamb Can Be Cut at a Taper to Fill Vertical Gap When Glass Should Have Been Cut Out of Square But Was Not

CRL Tapered Wall Jambs for CK/DK Cottage and EK Suite Series Sliders add versatility to our Frameless Sliding Shower Door Kits. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

Precise Closing Feature to Zero Degrees
Available in Several Beautiful Finishes
Three Year Warranty

The CRL Milano Series of professional hinges is able to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) tempered safety glass. A variety of three styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The traditionally designed Milano Series of Hinges are constructed of solid brass material for reliable and durable performance. The closing action of the Milano allows the door precise closing to zero degrees. Two Wall Mount styles and one Glass-to-Glass style provide design flexibility. The Milano Series offers five elegant finishes from which to choose. Accommodates 1/4 to 5/16 inch (6 to 8 millimeter) thick glass.

Finishes:

Catalog Number: DK70BA
Finish: BRITE ANODIZED

#
Individual Supplementary Extrusions and Hardware Components to Convert Our Frameless Shower Door Kits Into Angled Enclosures or Wider Inline Units
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Tapered Wall Jambs for CK/DK Cottage and EK Suite Series Sliders add versatility to our Frameless Sliding Shower Door Kits. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

Catalog Number: DK71720RB
Finish: OIL RUBBED BRONZE

#
Simply Field Fabricate As Desired
#
Bottom Sill Spacer Can Be Cut at a Taper to Bring the Bottom Sill to a Level Position

CRL Tapered Sill Adapter for CK/DK Cottage and EK Suite Series Sliders add versatility to our Frameless Sliding Shower Door Kits. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

Self-Centering with Reversible 5 Degree Pivot Pin
Available in Several Beautiful Finishes
3 Year Warranty

The CRL Trianon 092 Series of professional hinges is able to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) glass. A variety of five styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. Trianon Hinges can be used to support glass in swinging door installations. They feature radiused corners and beveled edges in several decorator finishes. Trianon Hinges are constructed of solid brass with a self-centering mechanism for door alignment when within 15 degree of the center. They contain a Reversible Pivot Pin for optional 5 degree offset door closure. Five distinct models include two Wall Mount styles, along with three Glass-to-Glass styles.

Finishes:

Catalog Number: DK71BA
Finish: BRITE ANODIZED

#
Individual Supplementary Extrusions and Hardware Components to Convert Our Frameless Shower Door Kits Into Angled Enclosures or Wider Inline Units
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Tapered Sill Adapter for CK/DK Cottage and EK Suite Series Sliders add versatility to our Frameless Sliding Shower Door Kits. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

Self-Centering with Reversible 5 Degree Pivot Pin
Available in Several Beautiful Finishes
Three Year Warranty

CRL Junior Geneva Series of professional hinges are able to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) glass. A variety of six styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. The same elegant European design that has made our Geneva Series so popular is available in a smaller version, the Junior Geneva, to offer additional application opportunities. Used to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) thick glass, the Junior Geneva is made of solid brass. There are three Wall Mount styles along with 90, 135 and 180 Degrees Glass-to-Glass styles. The Junior Geneva is self-centering and available in seven popular finishes. They contain a Reversible Pivot Pin for optional 5 degree offset door closure.

Finishes:

Can be Side Mounted at Top and Bottom
Available in Several Beautiful Finishes
3 Year Warranty

Our CRL Grande Series of professional hinges are able to accommodate 5/16 to 3/8 inch (8 to 10 millimeter) tempered safety glass. A variety of five styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Grande Hinge incorporates a larger mounting surface to provide superior support for frameless shower doors. The beveled edges are an attractive accent to Grande’s strong rectangular design, and the Offset Back Plate Wall Mount Model gives a clean exterior appearance. Grande Hinges can be mounted on the top and bottom corners of the door, or anywhere in-between. Grande is constructed of solid brass for years of reliable service.

Finishes:

Features Round Design and Beveled Edges
Available in Several Beautiful Finishes
3 Year Warranty

The Classique Series of professional hinges is able to accommodate 5/16 to 3/8 inch (8 to 10 millimeter) tempered safety glass. A variety of 5 styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Classique Shower Door Hinge is a design apart from traditional hinges. Beautiful round design and beveled edges are the result of an artist’s unique concept of the perfect hinge for decors with strong curved and contoured influences.
Finishes:

Catalog Number: EK670BA
Finish: BRITE ANODIZED

#
Several Architectural Finishes Available
#
Component to “EK” Series Shower Kits

This CRL Outside or Exterior Side Top Hanger Bracket is used with the EK Series Slider Kit. Works in conjunction with Interior Top Hangers Cat. No. EK671.

Finishes:

Catalog Number: EK671BA
Finish: BRITE ANODIZED

#
Several Architectural Finishes Available
#
Component Item to The “EK” Series Shower Sliders

This CRL Inside or Interior Side Top Hanger Bracket is used with EK Series Slider Kit. Works in conjunction with Exterior Top Hangers cat. No. EK670.

Finishes:

Catalog Number: EK61121BA
Finish: BRITE ANODIZED

#
Several Designer Finishes Available
#
For 1/4″ (6 mm) Glass
#
Low profile 2-1/4″ (57 mm) Header is Reversible So You Can Expose Either the Curved or Flat Side

CRL component items for our new “EK” Suite Series Frameless Sliding Shower Doors are ideal for use as replacement parts, or for units you wish to fabricate yourself. Stock lengths of the Extrusions, individual Towel Bars, Knobs, and accessory hardware provide all of the options you need to build your own inline enclosures for 1/4 inch (6 millimeter) glass. You can also send our Technical Sales Shower Door Department a drawing of the enclosure. They will be happy to quote a custom unit.

Finishes:

Catalog Number: EK61BA
Finish: BRITE ANODIZED

#
Several Designer Finishes Available
#
For 1/4″ (6 mm) Glass
#
Low profile 2-9/16″ (65 mm) Header is Reversible So You Can Expose Either the Curved or Flat Side

CRL component items for our new “EK” Suite Series Frameless Sliding Shower Doors are ideal for use as replacement parts, or for units you wish to fabricate yourself. Stock lengths of the Extrusions, individual Towel Bars, Knobs, and accessory hardware provide all of the options you need to build your own inline enclosures for 1/4 inch (6 millimeter) glass. You can also send our Technical Sales Shower Door Department a drawing of the enclosure. They will be happy to quote a custom unit.

Finishes:

Catalog Number: DK98T

#
Vinyl Seals Used Glass-to-Glass or Glass-to-Wall

Polycarbonates Seals adhere to the glass or wall using our Clear Very Hi-Bond Tape.

Finishes:

Catalog Number: DK98L

#
This is a Frameless Sliding Shower Enclosure Component
#
Vinyl Seals Used Glass-to-Glass or Glass-to-Wall

Polycarbonates Seals adhere to the glass or wall using our Clear Very Hi-Bond Tape.

Finishes:

Unique Two-Tone Design
Available in Several Beautiful Finishes
3 Year Warranty

The CRL Cathedral Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) thick tempered safety glass. A variety of 4 styles, Wall Mount and Glass-to-Glass types, gives design flexibility. The Cathedral Series Hinge combines a unique two-tone accent design with a positive hold cut-out and through-stud system. The Cathedral Series offers the same internal mechanism as our popular Geneva Series and contains a Reversible Pivot Pin for optional 5 degree offset door closure. A Custom Pivot Pin is available for “off-angle” installations.
Finishes:

Catalog Number: DK67BA
Finish: BRITE ANODIZED

#
Roller Bracket Assembly Used in Cottage Series Applications for 1/4″ (6 mm) Glass
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Top Hanger for CK/DK Cottage Series Sliders components add versatility to our Frameless Sliding Shower Door Kits, and allows you the option of adding additional panels to create a designer enclosure, or simply construct your own sliding unit by combining the various parts. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

Catalog Number: DK66BA
Finish: BRITE ANODIZED

#
Roller Bracket Assembly Used in Cottage Series Applications for 3/8″ (10 mm) Glass
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Top Hanger for CK/DK Cottage Series Sliders components add versatility to our Frameless Sliding Shower Door Kits, and allows you the option of adding additional panels to create a designer enclosure, or simply construct your own sliding unit by combining the various parts. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

Self-Centering Action
Available in Several Beautiful Finishes
3 Year Warranty

The CRL Estate Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) tempered safety glass. A variety of four styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. These beautifully finished, solid brass forged Estate Hinges make it possible to mount 3/8 to 1/2 inch (10 to 12 millimeter) thick shower doors without surrounding frames, so the door has an almost “floating” appearance. The Estate Hinges heavy-duty stainless steel springs allow the door to swing 90 degrees inwards and outwards. A friction cam allows the door to be firmly maintained in any position, except when within 15 degrees of the closed position, where it is tapered to assist in centering the door.
Finishes:

Self-Centering Action
Available in Many Beautiful Finishes
3 Year Warranty

The CRL Concord Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) tempered safety glass. A variety of four styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. These beautifully finished, solid brass forged Concord Hinges make it possible to mount 3/8 to 1/2 inch (10 to 12 millimeter) thick shower doors without surrounding frames, so the door has an almost “floating” appearance. The Concords heavy-duty stainless steel springs allow the door to swing 90 degrees inwards and outwards. A friction cam allows the door to be firmly maintained in any position, except when within 15 degrees of the closed position, where it is tapered to assist in centering the door.

Finishes:

Catalog Number: DK65BA
Finish: BRITE ANODIZED

#
Side Jamb is Used Against the Vertical Wall in “DK” Series Slider Applications
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Side Jamb for CK/DK Cottage Series Sliders components add versatility to our Frameless Sliding Shower Door Kits, and allows you the option of adding additional panels to create a designer enclosure, or simply construct your own sliding unit by combining the various parts. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

New Model Eliminates Small End Plate Covering Hinge on Edge of Fixed Panel
Requires Holes in Fixed Panel and Cut-Out in Door
Three Year Warranty

The CRL Roman 092 Series 90 Degrees Glass-to-Glass Hinges are able to accommodate 5/16 to 1/2 inch (8 to 12 millimeter) glass. This new style requires only two holes (per hinge) in the fixed panel, and a cut-out in the door. This new Roman style hinge eliminates the necessity of a small end plate, leaving a more aesthetic, uninterrupted glass edge for the fixed panel.
Finishes:

Catalog Number: DK65144BA
Finish: BRITE ANODIZED

#
Side Jamb is Used Against the Vertical Wall in “DK” Series Slider Applications
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Side Jamb for CK/DK Cottage Series Sliders components add versatility to our Frameless Sliding Shower Door Kits, and allows you the option of adding additional panels to create a designer enclosure, or simply construct your own sliding unit by combining the various parts. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

Catalog Number: DK64BA
Finish: BRITE ANODIZED

#
Sidelite Sill Used in Cottage Series Applications Where Fixed Panel is Same Height as Doors
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Sidelite Sill for CK/DK Cottage Series Sliders components add versatility to our Frameless Sliding Shower Door Kits, and allows you the option of adding additional panels to create a designer enclosure, or simply construct your own sliding unit by combining the various parts. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

Catalog Number: DK64144BA
Finish: BRITE ANODIZED

#
Sidelite Sill Used in Cottage Series Applications Where Fixed Panel is Same Height as Doors
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Sidelite Sill for CK/DK Cottage Series Sliders components add versatility to our Frameless Sliding Shower Door Kits, and allows you the option of adding additional panels to create a designer enclosure, or simply construct your own sliding unit by combining the various parts. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

Catalog Number: C0L092CH
Finish: CHROME

Accommodates 3/8″ to 1/2″ (10 to 12 mm) Glass
Available in Many Beautiful Finishes

Three Year Warranty

The CRL Cologne Series of professional hinges is designed to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. Available in both Wall Mount and Glass-to-Glass styles, it provides design flexibility. Cologne Series Hinges are constructed of solid brass with all moving parts (pins and springs) in stainless steel. Two strategically placed pins inside the hinge provide template options, and satisfy two schools of thought for mounting shower door hinges. It allows the Cologne Hinge to be used with it’s own CRL “mouse-ears”
cut-out, or in some cases fit competitive “mouse-ear” cut-outs. On the other hand, to enable increased adjustability, the two pins can be removed which allows the Vienna Hinge to fit it’s own CRL rectangular shape, square cornered cut-out, or in some cases, fit competitive rectangular shaped, square cornered cut-outs.
Finishes:

#
# Individual Supplementary Extrusions and Hardware Components to Convert Our Frameless Shower Door Kits Into Angled Enclosures or Wider Inline Units Bottom Sill Extrusion Used in All Cottage Series Applications
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Bottom Sill for CK/DK Cottage Series Sliders components add versatility to our Frameless Sliding Shower Door Kits, and allows you the option of adding additional panels to create a designer enclosure, or simply construct your own sliding unit by combining the various parts. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

Catalog Number: DK63144BA
Finish: BRITE ANODIZED

#
# Individual Supplementary Extrusions and Hardware Components to Convert Our Frameless Shower Door Kits Into Angled Enclosures or Wider Inline Units Bottom Sill Extrusion Used in All Cottage Series Applications
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Bottom Sill for CK/DK Cottage Series Sliders components add versatility to our Frameless Sliding Shower Door Kits, and allows you the option of adding additional panels to create a designer enclosure, or simply construct your own sliding unit by combining the various parts. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

Accommodates 3/8″ to 1/2″ (10 to 12 mm) Glass
Available in Many Beautiful Finishes
Three Year Warranty

The CRL Vienna Series of professional hinges is designed to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. Available in both Wall Mount and Glass-to-Glass styles, it provides design flexibility. Vienna Series Hinges are constructed of solid brass with all moving parts (pins and springs) in stainless steel. Two strategically placed pins inside the hinge provide template options, and satisfy two schools of thought for mounting shower door hinges. This allows the Vienna Hinge to be used with it’s own CRL “mouse-ears” cut-out, or in some cases fit competitive “mouse-ears” cut-outs. On the other hand, to enable increased adjustability, the two pins can be removed. This allows the Vienna Hinge to fit it’s own CRL rectangular shape, square cornered cut-out, or in some cases, fit competitive rectangular shaped, square cornered cut-outs. An Optional Custom Pivot pin can be ordered to accommodate off angle installations.
Finishes:

New Model Eliminates Small End Plate Covering Hinge on Edge of Fixed Panel
Requires Holes in Fixed Panel and Cut-Out in Door
3 Year Warranty

The new style CRL Pinnacle 092 Series 90 Degrees Glass-to-Glass Hinge replaces the old style Pinnacle 090 Series 90 Degrees Glass-to-Glass Hinge which required a cut-out in both the door and the fixed panel. This new style requires only two holes (per hinge) in the fixed panel, and a cut-out in the door.

Finishes:

New Model Eliminates Small End Plate Covering Hinge on Edge of Fixed Panel
Requires Holes in Fixed Panel and Cut-Out in Door
3 Year Warranty

The CRL Geneva 092 Series 90 Degrees Glass-to-Glass Hinges replace the old style Geneva 090 Series 90 Degrees Glass-to-Glass Hinge which required a cut-out in both the door and the fixed panel. This new style requires only two holes (per hinge) in the fixed panel, and a cut-out in the door.

Finishes:

For 3/8″ & 1/2″ (10 & 12 mm) Tempered Glass
Solid Forged Brass Construction
Available in Several Finishes

The CRL Sausalito Series Shower Door Hinge features precision machined stainless steel components with dual precision wound stainless steel return springs. The sleek clean lines of these oversized, forged solid brass hinges will add an optimal sense of style to any contemporary installation. The large surface area provides superior support for glass mounting. It is self closing from 25 degrees to self centering 0 degree return. (5 degree positive closure and 45 degree configurations available) Matched finish stainless steel Allen style clamp screws with an Allen wrench is included. Wall mount hinges include matched finish stainless steel mounting screws. Conservatively rated at 50 pounds per hinge.

Finishes:

For 3/8″ & 1/2″ (10 & 12 mm) Tempered Glass
Solid Forged Brass Hinges With Square Corners & Edges
Available in Several Finishes

The CRL Anaheim Series Shower Door Hinge features precision machined stainless steel components with mouse ear design for added holding strength. The versatile, adaptable styling of this hinge will compliment a traditional as well as a contemporary shower installation. This graceful simple design, besides being very functional, is also timeless. It is self closing from 25 degrees to self centering 0 degree return. (5 degree positive closure and 45 degree configurations available) An allen wrench is included with each hinge. This series hinge conservatively rated at 40 pounds per hinge.

Finishes:

Catalog Number: DK62BA
Finish: BRITE ANODIZED

#
# Individual Supplementary Extrusions and Hardware Components to Convert Our Frameless Shower Door Kits Into Angled Enclosures or Wider Inline Units Header Filler Used Where Fixed Panels are Located
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Header Filler for CK/DK Cottage Series Sliders components add versatility to our Frameless Sliding Shower Door Kits, and allows you the option of adding additional panels to create a designer enclosure, or simply construct your own sliding unit by combining the various parts. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Accommodates 3/8″ to 1/2″ (10 to 12 mm) Glass
Available in Several Beautiful Finishes
Three Year Warranty

The CRL Vienna Series of professional hinges is designed to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. Available in both Wall Mount and Glass-to-Glass styles, it provides design flexibility. Vienna Series Hinges are constructed of solid brass with all moving parts (pins and springs) in stainless steel. Two strategically placed pins inside the hinge provide template options, and satisfy two schools of thought for mounting shower door hinges. It allows the Vienna Hinge to be used with it’s own CRL “mouse-ears” cut-out, or in some cases fit competitive “mouse-ear” cut-outs. On the other hand, to enable increased adjustability, the two pins can be removed which allows the Vienna Hinge to fit it’s own CRL rectangular shape, square cornered cut-out, or in some cases, fit competitive rectangular shaped, square cornered cut-outs. An Optional Custom Pivot pin can be ordered to accommodate off angle installations.

Finishes:

#
# Components to Convert Our Frameless Shower Door Kits Into Angled Enclosures or Wider Inline Units Header Filler Used Where Fixed Panels are Located
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Header Filler for CK/DK Cottage Series Sliders components add versatility to our Frameless Sliding Shower Door Kits, and allows you the option of adding additional panels to create a designer enclosure, or simply construct your own sliding unit by combining the various parts. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

Catalog Number: DK61BA
Finish: BRITE ANODIZED

#
# Individual Supplementary Extrusions and Hardware Components to Convert Our Frameless Shower Door Kits Into Angled Enclosures or Wider Inline Units Top Header Extrusion Acts as a Crown, and is Used in All Cottage Series Applications
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Header for CK/DK Cottage Series Sliders components add versatility to our Frameless Sliding Shower Door Kits, and allows you the option of adding additional panels to create a designer enclosure, or simply construct your own sliding unit by combining the various parts. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

Factory Set For 5 Degree Offset Closure into Shower Interior
Available in Several Beautiful Finishes
3 Year Warranty

The CRL Pinnacle Series of professional hinges is able to accommodate 5/16 to 1/2 inch (8 to 12 millimeter) glass. A variety of six styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Pinnacle Hinges are self-centering, and contain a Reversible 5 Degree Pivot Pin. In addition, Custom Pivot Pins are available to accommodate “off angle” installations.

Finishes:

Catalog Number: DK61144BA
Finish: BRITE ANODIZED

#
Individual Supplementary Extrusions and Hardware Components to Convert Our Frameless Shower Door Kits Into Angled Enclosures or Wider Inline Units
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Header for CK/DK Cottage Series Sliders components add versatility to our Frameless Sliding Shower Door Kits, and allows you the option of adding additional panels to create a designer enclosure, or simply construct your own sliding unit by combining the various parts. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

Factory Set for Standard Closing Position
Available in Several Beautiful Finishes
3 Year Warranty

The CRL Pinnacle Series of professional hinges is able to accommodate 5/16 to 1/2 inch (8 to 12 millimeter) glass. A variety of six styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Pinnacle Hinges are self-centering, and contain a Reversible 5 Degree Pivot Pin. In addition, Custom Pivot Pins are available to accommodate “off angle” installations.

Finishes:

Self-Centering with Reversible 5 Degree Pivot Pin
Available in Several Beautiful Finishes
3 Year Warranty

The Geneva Series of professional hinges is able to accommodate 5/16 to 1/2 inch (8 to 12 millimeter) glass. A variety of six styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. The cut-out with the short Back Plate allows glass to be closer to the wall. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Geneva Hinges are self-centering, and contain a Reversible 5 Degree Pivot Pin. In addition, Custom Pivot Pins are available to accommodate “off angle” installations.
Finishes:

Self-Centering with Reversible 5 Degree Pivot Pin
Available in Several Beautiful Finishes
Three Year Warranty

The CRL Geneva Series of professional hinges is able to accommodate 5/16 to 1/2 inch (8 to 12 millimeter) glass. A variety of six styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. The cut-out with the short Back Plate allows glass to be closer to the wall. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Geneva Hinges are self-centering, and contain a Reversible 5 Degree Pivot Pin. In addition, Custom Pivot Pins are available to accommodate “off angle” installations.

Finishes:

Reliable Performance at a Value Price

Our NEW International Series Hinge blends value with performance. Offered in both traditional square cornered style, or with modern beveled edges,the International Series Hinge provides design flexibility. Wall Mount with Full Back Plate and 180 Degree Glass-to-Glass Models cover the majority of popular installation configurations. The solid brass constructed International Series Hinge will accommodate 5/16″ (8 mm), 3/8″ (10 mm), and 1/2″ (12 mm) thick tempered glass. Stocked in popular polished chrome and brushed nickel finishes.

Finishes:

Reliable Performance at a Value Price

Our NEW International Series Hinge blends value with performance. Offered in both traditional square cornered style, or with modern beveled edges,the International Series Hinge provides design flexibility. Wall Mount with Full Back Plate and 180 Degree Glass-to-Glass Models cover the majority of popular installation configurations. The solid brass constructed International Series Hinge will accommodate 5/16″ (8 mm), 3/8″ (10 mm), and 1/2″ (12 mm) thick tempered glass. Stocked in popular polished chrome and brushed nickel finishes.

Finishes:

Self-Centering with Optional 5 Degree Pivot Pin Set
Available in Many Beautiful Finishes
3 Year Warranty
U.S. Patent 5297313

The CRL Prima Series of professional hinges is able to accommodate 5/16 to 3/8 inch (8 to 10 millimeter) tempered safety glass. A variety of four styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Prima Hinges are self-centering, with four springs for maximum retention strength. Optional 5 Degree Pivot Pin Sets are available to accommodate “off angle” installations. Some advantages of pivot type hinges include the fact that they carry the majority of the weight on the bottom, and have the ability to be inset from the wall, enabling clearance for towel bars and other projections. The Prima Series is adaptable to CRL’s Deluxe Header System for shower enclosures not extending to full ceiling height.
Finishes:

For 3/8″ and 1/2″ (10 and 12 mm) Tempered Glass
Solid Forged Brass Hinges With Square Corners & Edges
Available in Several Finishes

The CRL Cicero Series Shower Door Hinge features precision machined stainless steel components with mouse ear design for added holding strength. The Cicero Series has the same timeless styling as the Anaheim hinge, but with clean, rounded corners and beveled edges. It is self closing from 25 degrees to self centering 0 degree return. (5 degree positive closure and 45 degree configurations available) An allen wrench is included with each hinge. This series hinge conservatively rated at 40 pounds per hinge.

Finishes:

Precise Closing Feature to Zero Degrees
Available in Several Beautiful Finishes
Three Year Warranty

The CRL Petite Series of professional hinges is able to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) tempered safety glass. The Petite 045 Series is designed to be able to mount a door on a wall that runs at a 45 degree inside plane. A variety of three styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Petite Series provides a complete spectrum of hinges for frameless shower doors using 1/4 to 5/16 inch (6 to 8 millimeter) safety glass. Developed to allow virtually every application configuration, Petite Series Hinges deliver design freedom. Petite Hinges have mitered edges with curved corners to provide an aesthetically pleasing look. Petite Hinges have 25% thicker plates than competitive hinges, thereby reducing deflection and providing greater holding power.

Finishes:

Precise Closing Feature to Zero Degrees
Available in Several Beautiful Finishes
3 Year Warranty

The CRL Petite Series of professional hinges is able to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) tempered safety glass. A variety of three styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Petite Series provides a complete spectrum of hinges for frameless shower doors using 1/4 to 5/16 inch (6 to 8 millimeter) safety glass. Developed to allow virtually every application configuration, Petite Series Hinges deliver design freedom. Petite Hinges have mitered edges with curved corners to provide an aesthetically pleasing look. Petite Hinges have 25% thicker plates than competitive hinges, thereby reducing deflection and providing greater holding power.

Finishes:

Precise Closing Feature to Zero Degrees
Available in Several Beautiful Finishes
3 Year Warranty

The CRL Petite Series of professional hinges is able to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) tempered safety glass. The Petite 054 Series is designed to be able to mount a door on a wall that runs at a 45 degrees outside plane. The Petite Series provides a complete spectrum of hinges for frameless shower doors using 1/4 to 5/16 inch (6 to 8 millimeter) safety glass. Developed to allow virtually every application configuration, Petite Series Hinges deliver design freedom.

Finishes:

Used to Wall Mount on a 45 Degree Inside Plane
Available in Several Beautiful Finishes
3 Year Warranty

The CRL Monaco Series introduces charm, richness and character to the choice of frameless shower door hinges using 1/4 to 5/16 inch (6 to 8 millimeter) safety glass. Available in two wall mount and four glass-to-glass styles, Monaco Hinges present numerous design and configuration options. Aesthetically pleasing beveled edges and corners give Monaco Hinges the look many architects and designers desire. Several standard finishes are stocked.

Finishes:

Used to Wall Mount on a 45 Degree Outside Plane
Available in Several Beautiful Finishes
Three Year Warranty

The CRL Monaco Series introduces charm, richness and character to the choice of frameless shower door hinges using 1/4 to 5/16 inch (6 to 8 millimeter) safety glass. Available in two wall mount and four glass-to-glass styles, Monaco Hinges present numerous design and configuration options. Aesthetically pleasing beveled edges and corners give Monaco Hinges the look many architects and designers desire. Several standard finishes are stocked.

Finishes:

Precise Closing Feature to Zero Degrees
Available in Several Beautiful Finishes
3 Year Warranty

The CRL Monaco Series introduces charm, richness and character to the choice of frameless shower door hinges using 1/4 to 5/16 inch (6 to 8 millimeter) safety glass. Available in two wall mount and four glass-to-glass styles, Monaco Hinges present numerous design and configuration options. Aesthetically pleasing beveled edges and corners give Monaco Hinges the look many architects and designers desire. Several standard finishes are stocked.
Finishes:

Catalog Number: 3800112
Finish: CHROME

For 3/8″ & 1/2″ (10 & 12 mm) Tempered Glass
Solid Forged Brass Hinges With Square Corners & Edges
Available in Several Finishes

The CRL Anaheim Series Shower Door Hinge features precision machined stainless steel components with mouse ear design for added holding strength. The versatile, adaptable styling of this hinge will compliment a traditional as well as a contemporary shower installation. This graceful simple design, besides being very functional, is also timeless. It is self closing from 25 degrees to self centering 0 degree return. (5 degree positive closure and 45 degree configurations available) An allen wrench is included with each hinge. This series hinge conservatively rated at 40 pounds per hinge.

Finishes:

Precise Closing Feature to Zero Degrees
Available in Several Beautiful Finishes
3 Year Warranty

The CRL Milano Series of professional hinges is able to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) tempered safety glass. A variety of three styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The traditionally designed Milano Series of Hinges are constructed of solid brass material for reliable and durable performance. The closing action of the Milano allows the door precise closing to zero degrees. Two Wall Mount styles and one Glass-to-Glass style provide design flexibility. The Milano Series offers five elegant finishes from which to choose. Accommodates 1/4 to 5/16 inch (6 to 8 millimeter) thick glass.

Finishes:

Self-Centering with Reversible 5 Degree Pivot Pin
3 Year Warranty

CRL Junior Geneva Series of professional hinges are able to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) glass. A variety of six styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. The same elegant European design that has made our Geneva Series so popular is available in a smaller version, the Junior Geneva, to offer additional application opportunities. Used to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) thick glass, the Junior Geneva is made of solid brass. There are three Wall Mount styles along with 90, 135 and 180 Degrees Glass-to-Glass styles. The Junior Geneva is self-centering and available in seven popular finishes. They contain a Reversible Pivot Pin for optional 5 degree offset door closure.

Finishes:

Self-Centering with Reversible 5 Degrees Pivot Pin
Available in Several Beautiful Finishes
3 Year Warranty

CRL Junior Geneva Series of professional hinges are able to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) glass. A variety of six styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. The same elegant European design that has made our Geneva Series so popular is available in a smaller version, the Junior Geneva, to offer additional application opportunities. Used to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) thick glass, the Junior Geneva is made of solid brass. There are three Wall Mount styles along with 90, 135 and 180 Degrees Glass-to-Glass styles. The Junior Geneva is self-centering and available in seven popular finishes. They contain a Reversible Pivot Pin for optional 5 degree offset door closure.

Finishes:

Self-Centering with Reversible 5 Degree Pivot Pin
Available in Several Beautiful Finishes
Three Year Warranty

CRL Junior Geneva Series of professional hinges are able to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) glass. A variety of six styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. The same elegant European design that has made our Geneva Series so popular is available in a smaller version, the Junior Geneva, to offer additional application opportunities. Used to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) thick glass, the Junior Geneva is made of solid brass. There are three Wall Mount styles along with 90, 135 and 180 Degrees Glass-to-Glass styles. The Junior Geneva is self-centering and available in seven popular finishes. They contain a Reversible Pivot Pin for optional 5 degree offset door closure.

Finishes:

Self-Centering with Reversible 5 Degree Pivot Pin
Available in Several Beautiful Finishes
3 Year Warranty

The CRL Trianon Series of professional hinges is able to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) glass. A variety of five styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. Trianon Hinges can be used to support glass in swinging door installations. They feature radiused corners and beveled edges in several decorator finishes. Trianon Hinges are constructed of solid brass with a self-centering mechanism for door alignment when within 15 degrees of the center. They contain a Reversible Pivot Pin for optional 5 degree offset door closure. Five distinct models include two Wall Mount styles, along with three Glass-to-Glass styles.

Can be Side Mounted at Top and Bottom
Available in Several Beautiful Finishes
3 Year Warranty

Our CRL Grande Series of professional hinges are able to accommodate 5/16 to 3/8 inch (8 to 10 millimeter) tempered safety glass. A variety of five styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Grande Hinge incorporates a larger mounting surface to provide superior support for frameless shower doors. The beveled edges are an attractive accent to Grande’s strong rectangular design, and the Offset Back Plate Wall Mount Model gives a clean exterior appearance. Grande Hinges can be mounted on the top and bottom corners of the door, or anywhere in-between. Grande is constructed of solid brass for years of reliable service.

Finishes:

Features Round Design and Beveled Edges
Available in Several Beautiful Finishes
3 Year Warranty

The CRL Classique Series of professional hinges is able to accommodate 5/16 to 3/8 inch (8 to 10 millimeter) tempered safety glass. A variety of five styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Classique Shower Door Hinge is a design apart from traditional hinges. Beautiful round design and beveled edges are the result of an artist’s unique concept of the perfect hinge for decors with strong curved and contoured influences. There are five distinct models, including a Flush Back Plate Wall Mount Hinge for clean exterior sight lines. The Classique’s beveled edges make an excellent presentation of sleek design, while the solid brass construction ensures superior quality and long life.

Finishes:

Ideal for Bi-Fold Application
Available in Several Beautiful Finishes
10 Year Warranty
ZURICH hinges are unavailable for the German market (ZURICH Beschläge sind für den deutschen Markt nicht verfügbar!)

The CRL Zurich Series of professional hinges is able to accommodate 5/16 to 3/8 inch (8 to 10 millimeter) tempered safety glass. A variety of six styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. The Zurich Series was CRL’s first offering of the popular bi-fold hinges. All six styles of Zurich Hinges feature stainless steel construction and are available in a variety of finishes. The brass finish is also available in solid brass construction with a protective coating. In addition, screws and washers are interchangeable for a special design accent. Only two holes per attachment are required, with no cut-out necessary.

Finishes:

Ideal for Bi-Fold Application
Available in Several Beautiful Finishes
10 Year Warranty
ZURICH hinges are unavailable for the German market (ZURICH Beschläge sind für den deutschen Markt nicht verfügbar!)

The CRL Zurich Series of professional hinges is able to accommodate 5/16 to 3/8 inch (8 to 10 millimeter) tempered safety glass. A variety of six styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. The Zurich Series was C.R. Laurence’s first offering of the popular bi-fold hinges. All six styles of Zurich Hinges feature stainless steel construction and are available in a variety of finishes. The brass finish is also available in solid brass construction with a protective coating. In addition, screws and washers are interchangeable for a special design accent. Only two holes per attachment are required, with no cut-out necessary.

Finishes:

Our Most Unique Design for the Construction of Frameless Showers
Set Doors at 90, 135, or 180 Degrees, or Anywhere In-Between
Constructed of Stainless Steel in Your Choice of Brushed or Polished Finishes
Fits 5/16″ (8 mm) and 3/8″ (10 mm) Thick Glass (Holes Required)
ARCTIC hinges are not available in Europe

This CRL Arctic Series Hinge is constructed of stainless steel, and is available in Glass-to-Glass and Glass-to-Wall models. Both are intended for use with 5/16 and 3/8 inch (8 and 10 millimeter) tempered safety glass. Neither requires that the glass be notched, only that each glass panel have two 1/2 inch (12 millimeter) holes drilled for the through-bolts. The body of the Arctic Hinge is all stainless steel with a pivot point that swings a full 180 degrees. Arctic gives you the option to set doors at 90, 135, or 180 degrees, or anywhere in-between. That’s a feature most other hinges can’t offer. If you’re looking for something new in frameless hinges, try the Arctic Series.

Finishes:

Our Spider Type Design for the Construction of Frameless Showers
Choice of Two Mounting Options: Glass-to-Glass and Glass-to-Wall
Constructed of 316 Stainless Steel in Your Choice of Brushed or Polished Finishes

For a new design in Frameless Shower Door Hinges, look no further than our Sydney Series. The unique “Spider Type” design is certain to give the frameless shower door a different look that will surely be noticed. Constructed of durable 316 stainless steel, Sydney Hinges are available in Wall-to- Glass and Glass-to-Glass models. The Glass-to-Glass model offers three settings at 90, 135, and 180 degrees. For doors falling in between these common installation angles, the springs may be removed to allow a “free-swinging” hinge. Two holes are required per hinge for each panel to accommodate the through-bolts, with no cut- cut necessary. The 316 stainless steel body of the Sydney Hinge allows the door to swing 90 degrees outward. Polished Stainless Steel and Brushed Stainless Steel finishes are offered.

Finishes:

Ability to be Side Mounted at Top and Bottom Corners
Available in Several Beautiful Finishes
3 Year Warranty

The CRL Elite Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) thick tempered safety glass. The Elite Series is a premium hinge for the wider and heavier glass doors. Unlike most other hinges, the Elite can be side mounted on the top and bottom corners of the door, or anywhere in-between. Containing a positive three-screw clamping system, the Elite Hinge incorporates a cut-out and through-stud that eliminates slippage. The Elite Series offers the same internal mechanism as our popular Geneva Series and contains a Reversible Pivot Pin for optional 5 degree offset door closure. A Custom Pivot Pin is available for “off-angle” installations.

Finishes:

Self-Centering with Reversible 5 Degree Pivot Pin
Available in Two Beautiful Finishes
3 Year Warranty

The CRL Ultimate Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. A variety of two styles, Wall Mount and Glass-to-Glass types, gives design flexibility. The Ultimate Series Hinge is named primarily for its combination of design elegance and service life. Featuring the same beautiful rounded corners and beveled edges of the Pinnacle Hinge, the Ultimate Hinge is constructed entirely of stainless steel. This all-stainless construction gives the Ultimate Hinge a durability not usually found in brass hinges. The Ultimate has superior survivability in conditions of accelerated corrosion, such as seaside communities with high atmospheric salt levels. The Ultimate Hinge has stainless steel plunger tips, pins and springs to endure long service life and reliable door closure. It also has the same Reversible 5 Degree Pivot Pin featured in our Geneva, Cathedral, Pinnacle and Elite Series. A Custom Pivot Pin is available for “off-angle” installations.

Finishes:

Self-Centering Action
Available in Many Beautiful Finishes
3 Year Warranty

The CRL Estate Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) tempered safety glass. A variety of four styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. These beautifully finished, solid brass forged Estate Hinges make it possible to mount 3/8 to 1/2 inch (10 to 12 millimeter) thick shower doors without surrounding frames, so the door has an almost “floating” appearance. The Estates heavy-duty stainless steel springs allow the door to swing 90 degrees inwards and outwards. A friction cam allows the door to be firmly maintained in any position, except when within 15 degrees of the closed position, where it is tapered to assist in centering the door.

Finishes:

Self-Centering Action
Available in Several Beautiful Finishes
3 Year Warranty

The CRL Concord Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) tempered safety glass. A variety of four styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. These beautifully finished, solid brass forged Concord Hinges make it possible to mount 3/8 to 1/2 inch (10 to 12 millimeter) thick shower doors without surrounding frames, so the door has an almost “floating” appearance. The Concords heavy- duty stainless steel springs allow the door to swing 90 degrees inwards and outwards. A friction cam allows the door to be firmly maintained in any position, except when within 15 degrees of the closed position, where it is tapered to assist in centering the door.

Finishes:

Factory Set for 5º Offset Closure into Shower Interior
Available in Several Beautiful Finishes
Three Year Warranty

The CRL Roman Series of professional hinges is able to accommodate 5/16 to 1/2 inch (8 to 12 millimeter) glass. A variety of five styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Roman Hinges are self-centering, Factory Set for 5º Offset Closure into Shower Interior. In addition, Custom Pivot Pins are available to accommodate “off angle” installations.

Finishes:

Self-Centering with Reversible 5 Degree Pivot Pin
Available in Several Beautiful Finishes
Three Year Warranty

The CRL Roman Series of professional hinges is able to accommodate 5/16 to 1/2 inch (8 to 12 millimeter) glass. A variety of five styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Roman Hinges are self-centering, and contain a Reversible 5 Degree Pivot Pin. In addition, Custom Pivot Pins are available to accommodate “off angle” installations.