Tag Archives: Headers

CRL 98″ EZ-Adjust Header Kits

Catalog Number: EHK980RB
Finish: OIL RUBBED BRONZE

Secures Shower Enclosure Not Going to Ceiling
Allows Horizontal (Side-to-Side) Adjustment of Hinge After Installation
No Hole Drilling Required Through Header or Adaptor, if Using Prima Hinge Model PPH06 or Senior Prima Hinge Model SRPPH06
Constructed of Heavy 6063-T5 Aluminum Alloy
For Use With 5/16″, 3/8″, and 1/2″ (8, 10, and 12 mm) Thick Glass

The CRL EZ-Adjust Shower Door Header Kit provides a safe and beautiful frameless shower installation by securing enclosures that do not reach the ceiling. Acting as a “crown” over the top of the glass, the EZ-Adjust Shower Door Header Kit is bracketed to each wall. The EZ-Adjust System allows adjustability after installation in that the hinge (PPH06 and SRPPH06 only) can be moved left and right as desired. No drilling through the Header is required for an Adaptor Block if Using Prima Hinge Model PPH06 or Senior Prima Hinge Model SRPPH06, due to a built-in adaptation to the hinges. Constructed of heavy 6063-T5 aluminum alloy, the EZ-Adjust Header Kit is stocked in several popular finishes. A choice of 98 and 144 inch (2.49 and 3.66 meters) stock lengths allow the user to cut as desired. A Snap-In Filler Insert for the door pocket, along with Wall Mounting Brackets and Clear Glazing Vinyl round out the Kit.
Finishes:

CRL 144″ EZ-Adjust Header Kits


Catalog Number: EHK144BA
Finish: BRITE ANODIZED

Secures Shower Enclosure Not Going to Ceiling
Allows Horizontal (Side-to-Side) Adjustment of Hinge After Installation
No Hole Drilling Required Through Header or Adaptor, if Using Prima Hinge Model PPH06 or Senior Prima Hinge Model SRPPH06
Constructed of Heavy 6063-T5 Aluminum Alloy
For Use With 5/16″, 3/8″, and 1/2″ (8, 10, and 12 mm) Thick Glass

The CRL EZ-Adjust Shower Door Header Kit provides a safe and beautiful frameless shower installation by securing enclosures that do not reach the ceiling. Acting as a “crown” over the top of the glass, the EZ-Adjust Shower Door Header Kit is bracketed to each wall. The EZ-Adjust System allows adjustability after installation in that the hinge (PPH06 and SRPPH06 only) can be moved left and right as desired. No drilling through the Header is required for an Adaptor Block if Using Prima Hinge Model PPH06 or Senior Prima Hinge Model SRPPH06, due to a built-in adaptation to the hinges. Constructed of heavy 6063-T5 aluminum alloy, the EZ-Adjust Header Kit is stocked in several popular finishes. A choice of 98 and 144 inch (2.49 and 3.66 meters) stock lengths allow the user to cut as desired. A Snap-In Filler Insert for the door pocket, along with Wall Mounting Brackets and Clear Glazing Vinyl round out the Kit.
Finishes:

CRL 144″ Apollo Style Shower Door Headers


Catalog Number: 3800064
Finish: BRITE SILVER

For 3/8″ and 1/2″ (10 and 12 mm) Tempered Glass
Available in Several Finishes
Sold in 12’ Stock Lengths

This CRL Apollo Style Header is a unique, heavy profile which provides maximum strength and unmatched beauty to the traditional shower enclosure.
Finishes:

CRL 144″ Euro Style Shower Door Headers

Catalog Number: 3800032
Finish: GOLD

For 3/8″ & 1/2″ (10 & 12 mm) Tempered Glass
Available in Several Finishes
Sold in 12’ Stock Lengths

This CRL Euro Style Header has slick, smooth styling makes the Euro Header the high fashion choice for today’s up-to-date, contemporary bathrooms.

Finishes:

CRL 144″ Round/Flat Profile Deluxe Headers Only


Catalog Number: SDH144BAEXT
Finish: BRITE ANODIZED

Available in Several Finishes
This is a Separately Sold Header Extrusion Bar Only for the CRL Header Kit

This extrusion bar is a component part only of a complete CRL Header Kit. To see the entire Kit that this part comes from, enter the same part number as this one in the Search Box, but delete EXT from the end of the Catalog Number.

Finishes:

CRL 144″ Round/Flat Profile Deluxe Header Kits


Catalog Number: SDH144BA
Finish: BRITE ANODIZED

Acts as a Decorative Crown Over Shower Enclosure to Secure Fixed Panels of Glass Not Going All the Way to the Ceiling
Available in Three Standard Lengths
Choice of Profiles: Round on One Side and Flat on the Other, or Flat on Both Sides of Header
Includes Snap-In Filler for Door Pocket, Wall Mounting Brackets, and Appropriate Vinyl for Snug Fit of Glass

The CRL Deluxe Header Only will provide additional support and a level of safety while securing glass panels not reaching the ceiling. Deluxe Header Kits are designed to allow installers to do in-house fabrication using a selection of component parts. Sold in 66, 98 and 144 inch (1676, 2489 and 3657 millimeter) lengths, the double profile extrusion has a narrow 1-1/4 inch (31.8 millimeter) face to minimize the visible sight line. A choice of facing edges (round or flat with mitered edges) is possible by simply reversing the extrusion. 90º, 135º or Adjustable Corners are sold separately. Also Available is a special Adapter Block for use on pivot hinge installations. A 2-1/4 inch (57.2 millimeter) Blank Mounting Bracket is offered for installations when the Header does not meet the wall at 90º, and the standard Wall Mounting Brackets cannot be used. Header is constructed of aluminum alloy 6463. This Header is adaptable to Senior Prima or Prima Hinges, Junior Prima Hinges should be used with the Junior Header Kit.

Finishes:

CRL 66″ Round/Flat Profile Deluxe Headers Only

Catalog Number: SDH660BAEXT
Finish: BRITE ANODIZED

Available in Several Finishes
This is a Separately Sold Header Extrusion Bar Only for the CRL Header Kit

This extrusion bar is a component part only of a complete CRL Header Kit. To see the entire Kit that this part comes from, enter the same part number as this one in the Search Box, but delete EXT from the end of the Catalog Number.

Finishes:

CRL 66″ Round/Flat Profile Deluxe Header Kits


Catalog Number: SDH660BA
Finish: BRITE ANODIZED

Acts as a Decorative Crown Over Shower Enclosure to Secure Fixed Panels of Glass Not Going All the Way to the Ceiling
Available in Three Standard Lengths
Choice of Profiles: Round on One Side and Flat on the Other, or Flat on Both Sides of Header
Includes Snap-In Filler for Door Pocket, Wall Mounting Brackets, and Appropriate Vinyl for Snug Fit of Glass

The CRL Deluxe Header Kit will provide additional support and a level of safety while securing glass panels not reaching the ceiling. Deluxe Header Kits are designed to allow installers to do in-house fabrication using a selection of component parts. Sold in 66, 98 and 144 inch (1676, 2489 and 3657 millimeter) lengths, the double profile extrusion has a narrow 1-1/4 inch (31.8 millimeter) face to minimize the visible sight line. A choice of facing edges (round or flat with mitered edges) is possible by simply reversing the extrusion. 90º, 135º or Adjustable Corners are sold separately. Also Available is a special Adapter Block for use on pivot hinge installations. A 2-1/4 inch (57.2 millimeter) Blank Mounting Bracket is offered for installations when the Header does not meet the wall at 90º, and the standard Wall Mounting Brackets cannot be used. Header is constructed of aluminum alloy 6463. This Header Kit is adaptable to Senior Prima or Prima Hinges, Junior Prima Hinges should be used with the Junior Header Kit.

Finishes:

CRL 98″ Flat/Flat Profile Deluxe Headers Only


Catalog Number: SQH980BAEXT
Finish: BRITE ANODIZED

Available in Several Finishes
This is a Separately Sold Header Extrusion Bar Only for the CRL Header Kit

This extrusion bar is a component part only of a complete CRL Header Kit. To see the entire Kit that this part comes from, enter the same part number as this one in the Search Box, but delete EXT from the end of the Catalog Number.

Finishes:

CRL 98″ Flat/Flat Profile Deluxe Header Kits


Catalog Number: SQH980BA
Finish: BRITE ANODIZED

Acts as a Decorative Crown Over Shower Enclosure to Secure Fixed Panels of Glass Not Going All the Way to the Ceiling
Available in Three Standard Lengths
Choice of Profiles: Round on One Side and Flat on the Other, or Flat on Both Sides of Header
Includes Snap-In Filler for Door Pocket, Wall Mounting Brackets, and Appropriate Vinyl for Snug Fit of Glass

The CRL Deluxe Header Kit will provide additional support and a level of safety while securing glass panels not reaching the ceiling. Deluxe Header Kits are designed to allow installers to do in-house fabrication using a selection of component parts. The extrusion has a narrow 1-1/4 inch (31.8 millimeter) face to minimize the visible sight line. 90º, 135º or Adjustable Corners are sold separately. Also Available is a special Adapter Block for use on pivot hinge installations. A 2-1/4 inch (57.2 millimeter) Blank Mounting Bracket is offered for installations when the Header does not meet the wall at 90º, and the standard Wall Mounting Brackets cannot be used. Header is constructed of aluminum alloy 6463. This Header Kit is adaptable to Senior Prima or Prima Hinges, Junior Prima Hinges should be used with the Junior Header Kit.
Finishes:

CRL 98″ Round/Flat Profile Deluxe Headers Only


Catalog Number: SDH980BAEXT
Finish: BRITE ANODIZED

Available in Several Finishes
This is a Separately Sold Header Extrusion Bar Only for the CRL Header Kit

This CRL Deluxe Header Only will provide additional support and a level of safety while securing glass panels not reaching the ceiling. Deluxe Headers are designed to allow installers to do in-house fabrication using a selection of component parts. Sold in 66, 98 and 144 inch (1676, 2489 and 3657 millimeter) lengths, the double profile extrusion has a narrow 1-1/4 inch (31.8 millimeter) face to minimize the visible sight line. A choice of facing edges (round or flat with mitered edges) is possible by simply reversing the extrusion. 90º, 135º or Adjustable Corners are sold separately. Also Available is a special Adapter Block for use on pivot hinge installations. A 2-1/4 inch (57.2 millimeter) Blank Mounting Bracket is offered for installations when the Header does not meet the wall at 90º, and the standard Wall Mounting Brackets cannot be used. Header is constructed of aluminum alloy 6463. This Header is adaptable to Senior Prima or Prima Hinges, Junior Prima Hinges should be used with the Junior Header.
Finishes:

CRL 98″ Round/Flat Profile Deluxe Header Kits


Catalog Number: SDH980BA
Finish: BRITE ANODIZED

Acts as a Decorative Crown Over Shower Enclosure to Secure Fixed Panels of Glass Not Going All the Way to the Ceiling
Available in Three Standard Lengths
Choice of Profiles: Round on One Side and Flat on the Other, or Flat on Both Sides of Header
Includes Snap-In Filler for Door Pocket, Wall Mounting Brackets, and Appropriate Vinyl for Snug Fit of Glass

The CRL Deluxe Header Kit will provide additional support and a level of safety while securing glass panels not reaching the ceiling. Deluxe Header Kits are designed to allow installers to do in-house fabrication using a selection of component parts. Sold in 66, 98 and 144 inch (1676, 2489 and 3657 millimeter) lengths, the double profile extrusion has a narrow 1-1/4 inch (31.8 millimeter) face to minimize the visible sight line. A choice of facing edges (round or flat with mitered edges) is possible by simply reversing the extrusion. 90º, 135º or Adjustable Corners are sold separately. Also Available is a special Adapter Block for use on pivot hinge installations. A 2-1/4 inch (57.2 millimeter) Blank Mounting Bracket is offered for installations when the Header does not meet the wall at 90º, and the standard Wall Mounting Brackets cannot be used. Header is constructed of aluminum alloy 6463. This Header Kit is adaptable to Senior Prima or Prima Hinges, Junior Prima Hinges should be used with the Junior Header Kit.

Finishes:

CRL Brass Wall Mount Brackets


Catalog Number: BWB2

For Use Only with SDH980, SDH660, and SDH144 Deluxe Header Kits

These CRL Brass Wall Mounting Brackets for Prima, Rondo or Shell Hinges are used with our Deluxe Header Kits. Two brackets and screws per package.

Finishes:

CRL Brass Adjustable Header Corner


Catalog Number: BHC373
Finish: BRASS

Screws Provided
Slides Neatly Into the “T” Slot in the Top of Our Deluxe Header
Available in 90 Degree, 135 Degree, and Adjustable Corners

These CRL Brass Adjustable Aluminum Corners are used with our Deluxe Header Kits. Screws are included with each corner purchased.

Finishes:

CRL Adapter Blocks Used with Senior Prima Hinges


Catalog Number: SRHAB01BA
Finish: BRITE ANODIZED

Allows Hinges to be Mounted Into Deluxe Header Kits
Fits Senior Prima, and Senior Cardiff Series Pivot Hinges
Available in Several Finishes

This CRL Senior Adapter Block is commonly used with the Senior Prima (not Junior or Regular series), and Senior Cardiff Series of hinges. The Senior Adapter Block allows the hinge to be mounted directly into the Shower Deluxe Header Assembly and can be adjusted sideways to any position required. The Adapter Block has a clearance notch which allows it to fit under the wall bracket when the hinge is mounted close to a wall. A drilled 1/4 inch (6 millimeter) hole in the header is required for installation and the hinge base plate must be removed to mount the hinge to the header. Each Senior Adapter Block is individually packed with a screw.

Finishes:

CRL Adapter Blocks Used with Prima Hinges


Catalog Number: HAB01BA
Finish: BRITE ANODIZED

Allows Hinges to be Mounted Into Deluxe Header Kits
Fits Prima, Cardiff, Shell and Rondo Series Pivot Hinges
Available in Several Finishes

This CRL Adapter Block is commonly used with the Prima (not Junior or Senior series), Cardiff, Shell, and Rondo Series of hinges. The Adapter Block allows the hinge to be mounted directly into the Shower Deluxe Header Assembly and can be adjusted sideways to any position required. The Adapter Block has a clearance notch which allows it to fit under the wall bracket when the hinge is mounted close to a wall. A drilled 3/16 inch (5 millimeter) hole in the header is required for installation and the hinge base plate must be removed to mount the hinge to the header. Each Adapter Block is individually packed with a screw.

Finishes:

CRL 90º End Mount Header Bracket


Catalog Number: CD406CH
Finish: CHROME

For Wall Mount Application

This CRL 90º End Mount Header Bracket can be used with our Junior Header Kits.

Finishes:

CRL 5/16″ & 3/8″ Header Vinyl


Catalog Number: HV380

For Use With the Deluxe Header Kits

The CRL Clear Deluxe Header Vinyl is used with our Deluxe Header Kits. CRL offers replacement vinyl if you want to keep extra on hand. Appropriate lengths of vinyl for 1/4 and 5/16 inch (6 and 8 millimeters) glass are also offered. All are sold in increments of eight feet. Minimum order is eight feet.

Finishes:

CRL 1/4″ Shower Header Vinyl


Catalog Number: HV140

For Use With the Deluxe Header Kits

The CRL Clear Deluxe Header Vinyl is used with our Deluxe Header Kits. CRL offers replacement vinyl if you want to keep extra on hand. Appropriate lengths of vinyl for 5/16 and 3/8 inch (8 and 10 millimeters) glass are also offered. All are sold in increments of eight feet. Minimum order is eight feet.

Finishes:

CRL Adjustable Corner


Catalog Number: CD373

Screws Provided
Slides Neatly Into the “T” Slot in the Top of Our Deluxe Header
Available in 90 Degree, 135 Degree, and Adjustable Corners

These CRL Adjustable Aluminum Corners are used with our Deluxe Header Kits. Screws are included with each corner purchased.

Finishes:

CRL Header Corners


Catalog Number: BHC135
Finish: BRASS

Screws Provided
Slides Neatly Into the “T” Slot in the Top of Our Deluxe Header
Available in 90 Degree, 135 Degree, and Adjustable Corners

These CRL Brass 135º Aluminum Corners are used with our Deluxe Header Kits. Screws are included with each corner purchased.

Finishes:

CRL Standard Wall Mounting Bracket


Catalog Number: SHB100

Package of Two
Same Bracket That is Included in Every Deluxe Header Kit

These CRL Standard Wall Mounting Brackets come standard with each Deluxe Shower Door Header Kit purchased. But make sure to keep a few extras on hand just in case!
Finishes:

CRL 2-1/4″ Blank Mounting Bracket


Catalog Number: SHB225

For Shower Door Deluxe Headers
Make Your Own Angles With This Blank Bracket

This CRL 2-1/4″ Aluminum Blank Mounting Bracket is used with our Shower Door Headers when the Header does not meet the wall at a typical 90 degrees and standard wall mounting brackets will not work. Make this Blank Wall Mounting Bracket any angle by identifying the angle needed in the field and fabricating the bracket accordingly. Simple scribing, cutting, and filing will make this bracket exactly what you need to attach to the “off-angle” wall. Sold individually.
Finishes:

CRL Replacement Vinyls for Dry Glaze U-Channel for 3/8″ Glass


Catalog Number: FV4DUC

Replacement Vinyl for Cat. No. DUC38 Dry Glaze U-Channels
Clear Vinyl Secures Glass in Channel and Eliminate the Need for Messy Silicone
Two Pieces Available: Flexible and Rigid

The CRL Flexible Vinyl is inserted into Cat. No. DUC38 U-Channel on the interior of the shower, while the CRL Rigid Leg Vinyl is inserted into the U-Channel on the exterior side. Minimum order is one each. A Packing Charge will be added to orders of fewer than 10 combined lengths.

Finishes:

CRL Dry Glaze U-Channel for 3/8″ Glass Only


Catalog Number: DUC38BA
Finish: BRITE ANODIZED

Clear Vinyl Secures Glass in Channel and Eliminate the Need for Messy Silicone
Recess in Bottom Channel Hides Caulk Line
Channel and Matching End Caps Available in Several Popular Finishes

Dry Glaze U-Channel offers the installer many benefits. It eliminates the need for messy silicone between the glass and metal, dramatically reducing installation time. If the glass is ever scratched or damaged it can be removed without the need to cut out the sealant. The extruded aluminum channel is wrapped in a protective poly sleeve with two pieces of clear vinyl to secure 3/8″ (10 mm) glass. The “Flexible” Vinyl goes on the interior of the shower, while the “Rigid Leg” Vinyl “rolls in” on the exterior side. Matching finish End Caps adhere to channel ends, and must be ordered separately.

Finishes:

CRL Regular U-Channel for 1/2″ Glass – 98″


Catalog Number: SDCR12BA
Finish: BRITE ANODIZED

Wet Glazed With Clear Silicone to Secure Fixed Panels of Glass
Lower Profile Allows Maximum Glass Exposure
Popular 98″ (2.49 m) Stock Lengths

This CRL Regular U-Channel has a low profile. The 3/8 inch (9.5 millimeter) height allows for maximum glass exposure. Most commonly used on the bottom and side of fixed panels, while the Deep U-Channel is commonly used on top for maximum coverage. Cat. No. 33SMRC Mildew Resistant Clear Silicone is used to secure glass in the channel.

Finishes:

CRL Regular U-Channel for 3/8″ Glass – 98″


Catalog Number: SDCR38BA
Finish: BRITE ANODIZED

Wet Glazed With Clear Silicone to Secure Fixed Panels of Glass
Lower Profile Allows Maximum Glass Exposure
Popular 98″ (2.49 m) Stock Lengths

This CRL Regular U-Channel has a low profile. The 3/8 inch (9.5 millimeter) height allows for maximum glass exposure. Most commonly used on the bottom and side of fixed panels, while the Deep U-Channel is commonly used on top for maximum coverage. Cat. No. 33SMRC Mildew Resistant Clear Silicone is used to secure glass in the channel.
Finishes:

CRL Deep U-Channel for 3/8″ Glass – 144″


Catalog Number: SDCD3812BA
Finish: BRITE ANODIZED

Deep Pocket Does Excellent Job of Securing Fixed Panels of Glass
Wet Glazed With Clear Silicone to Secure Glass
Popular 98″ (2.49 m) or 144″ (3.66 m) Stock Lengths
End Caps Offered to Conceal Ends of Channel
May Be Used Alone or With Regular Depth U-Channel

This 3/4 inch (19 millimeter) tall profile CRL Deep U-Channel is used for securing fixed panels of glass to the wall, ceiling or floor. Widths suitable for 3/8 and 1/2 inch (10 and 12 millimeter) thick glass are available, and are individually wrapped to protect the finish. The 3/4 inch (19 millimeter) tall profile Deep U-Channel can be used also as the top channel in installations where the glass must be inserted into the top, then lowered into the Regular U-Channel used at the bottom of the enclosure. 144 inch (3.66 meter) stock length.

Finishes:

CRL Deep U-Channel for 3/8″ Glass – 98″


Catalog Number: SDCD38BA
Finish: BRITE ANODIZED

Deep Pocket Does Excellent Job of Securing Fixed Panels of Glass
May Be Used Alone or With Regular Depth U-Channel
Wet Glazed With Clear Silicone to Secure Glass
All Available in Popular 98″ (2.49 m) Lengths, Some Available in Economical 144″ (3.66 m) Stock Lengths
End Caps Offered to Conceal Ends of Channel

Deep U-Channel is for securing fixed panels of glass to the wall, ceiling or floor. Widths suitable for 3/8 and 1/2 inch (10 and 12 millimeter) thick glass are available, and are individually wrapped to protect the finish. The 3/4 inch (19 millimeter) tall profile Deep U-Channel can be used also as the top channel in installations where the glass must be inserted into the top, then lowered into the Regular U-Channel used at the bottom of the enclosure. Over a dozen stock finishes are offered.

Finishes:

CRL Deep U-Channel for 1/2″ Glass – 144″


Catalog Number: SDCD1212BA
Finish: BRITE ANODIZED

Deep Pocket Does Excellent Job of Securing Fixed Panels of Glass
Wet Glazed With Clear Silicone to Secure Glass
Popular 98″ (2.49 m) or 144″ (3.66 m) Stock Lengths
End Caps Offered to Conceal Ends of Channel
May Be Used Alone or With Regular Depth U-Channel

This 3/4 inch (19 millimeter) tall profile CRL Deep U-Channel is used for securing fixed panels of glass to the wall, ceiling or floor. Widths suitable for 3/8 and 1/2 inch (10 and 12 millimeter) thick glass are available, and are individually wrapped to protect the finish. The 3/4 inch (19 millimeter) tall profile Deep U-Channel can be used also as the top channel in installations where the glass must be inserted into the top, then lowered into the Regular U-Channel used at the bottom of the enclosure. 144 inch (3.66 meter) stock length.

Finishes:

CRL Deep U-Channel for 1/2″ Glass – 98″


Catalog Number: SDCD12BA
Finish: BRITE ANODIZED

Deep Pocket Does Excellent Job of Securing Fixed Panels of Glass
May Be Used Alone or With Regular Depth U-Channel
Wet Glazed With Clear Silicone to Secure Glass
All Available in Popular 98″ (2.49 m) Lengths, Some Available in Economical 144″ (3.66 m) Stock Lengths
End Caps Offered to Conceal Ends of Channel

Deep U-Channel is for securing fixed panels of glass to the wall, ceiling or floor. Widths suitable for 3/8 and 1/2 inch (10 and 12 millimeter) thick glass are available, and are individually wrapped to protect the finish. The 3/4 inch (19 millimeter) tall profile Deep U-Channel can be used also as the top channel in installations where the glass must be inserted into the top, then lowered into the Regular U-Channel used at the bottom of the enclosure. Over a dozen stock finishes are offered.

Finishes:

CRL Jamb With Vinyl Wipe


Catalog Number: AJ78BA
Finish: BRITE ANODIZED

For Use on Strike Side or Hinge Side of the Door Opening
Clear Vinyl Included With Each Set
Available in Several Popular Finishes

This extruded CRL Aluminum Jamb with Clear Vinyl Wipe provides water resistance when the door is closed. Clear Vinyl is included with each set. It can be used on the strike side of the door opening with any of our Frameless Shower Door Hinges. Also applicable to the hinge side when used with Top and Bottom Mount Pivot Hinges, such as the Prima, Senior Prima, Junior Prima, Cardiff, Shell and Rondo Series. Stock length is 78 inches (1.98 meters).
Finishes:

CRL U-Channel with Wipe for 1/2″ Glass – 98″


Catalog Number: SDW12BA
Finish: BRITE ANODIZED

Aluminum Channel With Built-In Vinyl Wipe Fits Onto Bottom of Shower Door
Available in Several Finishes
Maintains Continuous Metal Sightline When Used on Door Next to Fixed Panels With Deep U-Channel

This door bottom mounted CRL U-Channel with Door Wipe has a 1/2 inch (12.7 millimeter) profile, which makes an even sight line when used next to a fixed panel glazed with Deep U-Channel on the bottom. While many will choose to use a clear wipe at the bottom of the shower door for an ‘all-glass’ look, others will want the continuous appearance of metal while using this Shower Door U-Channel With Wipe.

Finishes:

CRL U-Channel with Wipe for 3/8″ Glass – 98″


Catalog Number: SDW38BA
Finish: BRITE ANODIZED

Aluminum Channel With Built-In Vinyl Wipe Fits Onto Bottom of Shower Door
Available in Several Finishes
Maintains Continuous Metal Sightline When Used on Door Next to Fixed Panels With Deep U-Channel

This door bottom mounted CRL U-Channel with Door Wipe has a 1/2 inch (12.7 millimeter) profile, which makes an even sight line when used next to a fixed panel glazed with Deep U-Channel on the bottom. While many will choose to use a clear wipe at the bottom of the shower door for an ‘all-glass’ look, others will want the continuous appearance of metal while using this Shower Door U-Channel With Wipe.

Finishes:

CRL Junior Header Adapter Blocks


Catalog Number: JRHAB01BGA
Finish: BRITE GOLD

For Use With Junior Prima Hinges and Junior Header Kits Only

This CRL Junior Adapter Block is used with our Junior Prima Hinges and our Junior Header Kit. The Junior Header Kit for 1/4 inch (6 millimeter) glass provides support to shower enclosures not going all the way to the ceiling.

Finishes:

CRL 98″ Junior Header Kits


Catalog Number: HEADER06CH
Finish: CHROME

Kit Contains Everything Required for Installation
Secures Shower Enclosures Not Going All the Way to the Ceiling
Available in Several Finishes
Dual Profile Allows User Choice of Soft Rounded Side or Flat Side

The CRL Junior Header Kit for 1/4 inch (6 millimeter) thick glass provides support to shower enclosures not going all the way to the ceiling. Installers can do in-house or jobsite fabrication using the components provided.

Finishes:

CRL Junior Header Replacement Snap-In Filler


Catalog Number: 1N06CH
Finish: BRITE ANODIZED

36″ (914 mm) Replacement Snap-In Filler
Several Colors Available
Works With Junior Header

CRL 6 mm Junior Header Snap-In Filler is a 36 inch (914 millimeter) replacement piece that puts the finishing touch on the Junior Header. By simply press fitting the Filler into the Header directly above the door pocket, you create an even sightline of metal, and fill what would have been an unattractive Header pocket.
Finishes:

CRL 122″ Snap-In Filler Strip


Catalog Number: 3800502
Finish: BRITE GOLD

For Use With Apollo and Euro Headers

This CRL Snap-In Filler Strip snaps into header to fill in the pocket above the shower door, between the fixed panels. Vinyl fills 1/2 inch pocket when using 3/8 inch glass. For use with Apollo and Euro Headers. Filler strip snaps into header above door for a smooth, seamless look. Sold per length.

Finishes:

CRL 72″ Snap-In Filler Strip


Catalog Number: S1F720BAEXT
Finish: BRITE ANODIZED

For Use With CRL Shower Door Deluxe Headers

A 36 inch (914 millimeter) piece of Snap-in-Filler is provided with each Deluxe Header Kit, and is also available for replacement in both 36 and 72 inch (914 and 1829 millimeter) lengths. Snap-in-Filler puts the finishing touch on the installation of the Deluxe Header. By simply press fitting the Filler into the Header directly above the door pocket, you create an even sightline of metal, and fill what would have been an unattractive Header pocket.

Finishes:

CRL 36″ Snap-In Filler Strip


Catalog Number: S1F360BAEXT
Finish: BRITE ANODIZED

For Use With CRL Shower Door Deluxe Headers

A 36 inch (914 millimeter) piece of Snap-in-Filler is provided with each Deluxe Header Kit, and is also available for replacement in both 36 and 72 inch (914 and 1829 millimeter) lengths. Snap-in-Filler puts the finishing touch on the installation of the Deluxe Header. By simply press fitting the Filler into the Header directly above the door pocket, you create an even sightline of metal, and fill what would have been an unattractive Header pocket.

Finishes:

CRL End Caps for 1/2″ Deep U-Channel


Catalog Number: SDCEC12BN
Finish: BRUSHED NICKEL

Available in Several Attractive Finishes
Covers Open End of SDCD12 and DUC38 Series U-Channels
Easy to Install

This CRL End Cap is designed to cover exposed ends of the Deep U-Channel to improve the beauty of your shower installation. Available in several attractive finishes, the End Caps are easily installed using a dab of Silicone.

Finishes:

CRL End Caps for 3/8″ Deep U-Channel


Catalog Number: SDCEC38CH
Finish: CHROME

Available in Several Attractive Finishes
Covers Open End of SDCD38 Series U-Channels
Easy to Install

This CRL End Cap is designed to cover exposed ends of the Deep U-Channel to improve the beauty of your shower installation. Available in three attractive finishes, the End Caps are easily installed using a dab of Silicone.

Finishes:

CRL Frameless Header 98″ Length


Catalog Number: 3800757
Finish: BRITE SILVER

Available in Brite Silver and Brite Gold

This CRL Frameless Header is designed for use on 1/4 inch frameless glass units.

Finishes:

CRL 3/8″ Twin Roll Headers 98″ Length


Catalog Number: 3800790
Finish: BRITE GOLD

Available in 2 Finishes

This CRL 3/8″ Twin Roll Header is designed for use with sliding panels that have a total weight of 200 pounds or less.

Finishes:

CRL Twin Roll Headers 98″ Length


Catalog Number: 3800591
Finish: BRITE GOLD

Available in Several Colors

This CRL Twin Roll Header is designed for use with sliding panels that have a total weight of 135 pounds or less.

Finishes:

CRL Twin Roll Headers 15′ Length


Catalog Number: 3800591
Finish: BRITE GOLD

Available in Several Colors

This CRL Twin Roll Header is designed for use with sliding panels that have a total weight of 135 pounds or less.

Finishes:

CRL Daylite Headers 98″ Length


Catalog Number: 3800596
Finish: SATIN SILVER

Available in Several Finishes

This CRL Daylite Header is designed to be used with the standard framed style daylite unit.

Finishes:

98″ Standard Bottom Track


Catalog Number: 3800604
Finish: SATIN SILVER

Available in 98″ or 15’0″ (2.5 or 4.6 m) Lengths

This CRL Standard Bottom Track is a classic design, for use with framed twin roll panels.

Finishes:

98″ E-Z Clean Bottom Track


Catalog Number: 3800615
Finish: BRITE GOLD

Available in 98″ or 15’0″ (2.5 or 4.6 m) Lengths

The CRL E-Z Clean Bottom Track can be used with either framed or 1/4 and 3/8 inch frameless track guides.

Finishes:

98″ E-Z Clean Track


Catalog Number: 3800797
Finish: BRITE SILVER

Available in 98″ or 15’0″ (2.5 or 4.6 m) Lengths

33sc, rtv408c, bl9934, at04512, 491014, 17600.

Finishes:

98″ Magnetic 135º Post


Catalog Number: 3800620
Finish: SATIN SILVER

Available in 98″ or 11’10″ (2.5 or 3.6 m) Lengths

This CRL Magnetic 135º Post is for use with framed daylite units.

Finishes:

11’10″ Magnetic 135º Post


Catalog Number: 3800626
Finish: BRITE SILVER

Available in 98″ or 11’10″ (2.5 or 3.6 m) Lengths

This CRL Magnetic 135º Post is for use with framed daylite units.

Finishes:

11’10″ Magnetic 90º Post


Catalog Number: 3800634
Finish: BRITE SILVER

Available in 98″ or 11’10″ (2.5 or 3.6 m) Lengths

This CRL Magnetic 90º Post is for use with framed daylite units.

Finishes:

98″ Magnetic 90º Post


Catalog Number: 3800628
Finish: SATIN SILVER

Available in 98″ or 11’10″ (2.5 or 3.6 m) Lengths

This CRL Magnetic 90º Post is for use with framed daylite units.

Finishes:

98″ Universal Post


Catalog Number: 3800636
Finish: SATIN SILVER

Available in 98″ or 11’10″ (2.5 or 3.6 m) Lengths

This CRL Universal Post is available in several finishes and lengths.

Finishes:

11’10″ Universal Post


Catalog Number: 3800642
Finish: BRITE SILVER

Available in 98″ or 11’10″ Lengths

This CRL Universal Post is available in several finishes and lengths.

Finishes:

98″ Standard Rails


Catalog Number: 3800503
Finish: BRITE GOLD

Available in 98″ or 11′-10″ (2.5 or 3.6 m) Lengths

This CRL Standard Rail can be used as side rail on twin roll sliding enclosures and as top and bottom rail on doors and fixed panels.

Finishes:

11’10″ Standard Rails


Catalog Number: 3800507
Finish: BRITE GOLD

Available in 98″ or 11’10″ Lengths

This CRL Standard Rail can be used as side rail on twin roll sliding enclosures and as top and bottom rail on doors and fixed panels.

Finishes:

98″ Magnetic Rails


Catalog Number: 3800510
Finish: BRITE SILVER

Available in 98″ or 11’10″ (2.5 or 3.6 m) Lengths

This CRL Magnetic Rail is used as a side rail on magnetic closure doors.

Finishes:

16′ Hanger Rails


Catalog Number: 3800522
Finish: BRITE SILVER

Available in 98″ or 16’0″ (2.5 or 4.9 m) Lengths

This CRL Hanger Rail is used as the top rail on twin roll sliding door units. The mounting slot on the top allows for the mounting of a roller bracket.

Finishes:

98″ Hanger Rails


Catalog Number: 3800516
Finish: SATIN SILVER

Available in 98″ or 16’0″ (2.5 or 4.9 m) Lengths

This CRL Hanger Rail is used as the top rail on twin roll sliding door units. The mounting slot on the top allows for the mounting of a roller bracket.

Finishes:

16′ E-Z Clean Rails


Catalog Number: 3800530
Finish: BRITE SILVER

Available in 98″ or 16’0″ (2.5 or 4.9 m) Lengths

This CRL E-Z Clean Rail is used as a bottom rail on twin roll sliding door sets, the E-Z Clean rail has a guide slot in it for use with E-Z Clean bottom track and track guide 3801007.

Finishes:

98″ E-Z Clean Rails


Catalog Number: 3800524
Finish: SATIN SILVER

Available in 98″ or 16’0″ (2.5 or 4.9 m) Lengths

This CRL E-Z Clean Rail is used as a bottom rail on twin roll sliding door sets, the E-Z Clean rail has a guide slot in it for use with E-Z Clean bottom track and track guide 3801007.

Finishes:

12′ Frameless Adapter Rails


Catalog Number: 3800737
Finish: BRITE SILVER

Available in 98″ or 12’0″ (2.5 or 3.6 m) Lengths

This CRL Frameless Adapter Rail is used as wall jamb and bottom rail for fixed panels in 1/4 inch dual configuration kits. Panels are wet glazed using clear setting blocks and clear silicone.

Finishes:

CRL Frameless Shower Door Half-Round Threshold


Catalog Number: SDT980BA
Finish: BRITE ANODIZED

Assists Watershed Back Into Shower
Perfect for Flat or Out-Sloping Curbs

This CRL Shower Door Threshold is mounted directly below the shower door to let the water drain back into the shower stall. Ideal for flat or out-sloping curbs. The rounded low contour on the Half Round Threshold will not harm feet. The Tapered Style Sill leaves a minimal sightline from the exterior of the shower. Thresholds may be used in conjunction with a bottom sweep.

Finishes:

CRL Frameless Shower Door Tapered Threshold


Catalog Number: S1L001CH
Finish: CHROME

Assists Watershed Back Into Shower
Perfect for Flat or Out-Sloping Curbs

These CRL Shower Door Thresholds are mounted directly below the shower door to let the water drain back into the shower stall. Ideal for flat or out-sloping curbs. The rounded low contour of the Half Round Threshold will not harm feet. The Tapered Style Sill leaves a minimal sightline from the exterior of the shower. These thresholds may be used in conjunction with a bottom sweep. Use Mildew Resistant Silicone Sealant to adhere to curb of shower stall.

Finishes:

98″ Twin Roll Jambs


Catalog Number: 3800534
Finish: BRITE SILVER

Available in 98″ or 12’0″ (2.5 or 3.6 m) Lengths

This CRL Twin Roll Wall Jamb is used as the upright wall receiver for the sliding panels.

Finishes:

12′ Twin Roll Jambs


Catalog Number: 3800538
Finish: BRITE SILVER

Available in 98″ or 12’0″ (2.5 or 3.6 m) Lengths

This CRL Twin Roll Wall Jamb is used as the upright wall receiver for the sliding panels.

Finishes:

98″ Pivot Bottom Jamb


Catalog Number: 3800564
Finish: SATIN SILVER

Available in 98″ or 16’0″ (2.5 or 4.9 m) Lengths

This CRL Pivot Bottom Jamb is available in several finishes and lengths.

Finishes:

98″ Pivot Wall Jambs


Catalog Number: 3800548
Finish: SATIN SILVER

Available in 98″ or 16’0″ (2.5 or 4.9 m) Lengths

This CRL Pivot Wall Jamb is used with a pivot bracket and retainer set catalog number 3801019 or 3801031.

Finishes:

11’10″ Magnetic Fill Jambs


Catalog Number: 3800587
Finish: BRITE GOLD

Available in 98″ or 11’10″ (2.5 or 3.6 m) Lengths

This CRL Magnetic Fill Jamb slips on to a side rail.

Finishes:

98″ Magnetic Fill Jambs


Catalog Number: 3800580
Finish: SATIN SILVER

Available in 98″ or 11’10″ (2.5 or 3.6 m) Lengths

This CRL Magnetic Fill Jamb slips on to a side rail.

Finishes:

12′ Magnetic Strike


Catalog Number: 3800754
Finish: BRITE SILVER

Available in 98″ or 12’0″ (2.5 or 3.6 m) Lengths

This CRL Magnetic Strike Jamb is for use on glass-to-glass closures. This extrusion will bond to 1/4 inch glass only. There is an insert groove for a magnet.

Finishes:

98″ Magnetic Strike


Catalog Number: 3800749
Finish: BRITE SILVER

Available in 98″ or 12’0″ (2.5 or 3.6 m) Lengths

This CRL Magnetic Strike Jamb is for use on glass-to-glass closures. This extrusion will bond to 1/4 inch glass only. There is an insert groove for a magnet.

Finishes:

16′ Magnetic Strike Jambs


Catalog Number: 3800576
Finish: SATIN SILVER

Available in 98″ or 16’0″ (2.5 or 4.9 m) Lengths

This CRL Magnetic Strike Jamb is used for wall mounting.

Finishes:

98″ Magnetic Strike Jambs


Catalog Number: 3800572
Finish: SATIN SILVER

Available in 98″ or 16’0″ (2.5 or 4.9 m) Lengths

This CRL Magnetic Strike Jamb is used for wall mounting.
Finishes:

98″ Narrow Bottom Jambs


Catalog Number: 3800556
Finish: SATIN SILVER

Available in 98″ or 16’0″ (2.5 or 4.9 m) Lengths

This CRL Narrow Bottom Jamb comes in several colors and different lengths.
Finishes:

98″ – 1/2″ Wide U-Channel


Catalog Number: 3800543
Finish: BRITE GOLD

Available in 98″ and 12′ (2.5 and 3.6 m) Lengths in Several Finishes

This CRL Curb U-Channel is for use on frameless units.
Finishes:

98″ – 3/8″ Wide U-Channel


Catalog Number: 3800670
Finish: BRITE SILVER

Available in 98″ (2.5 m) Lengths and Several Finishes

This CRL Curb U-Channel is for use on frameless units.
Finishes:

10′ Long 2″ High Filler Stock


Catalog Number: 3800699
Finish: BRITE GOLD

Available in 98″ or 10′ (2.5 or 3 m) Lengths

This CRL 2″ High U-Channel Filler Stock is available in several finishes and lengths.

Finishes:

98″ Long 2″ High Filler Stock


Catalog Number: 3800695
Finish: BRITE GOLD

Available in 98″ or 10′ (2.5 or 3 m) Lengths

This CRL 2″ High U-Channel Filler Stock is available in several finishes and lengths.

Finishes:

eXTReMe Tracker