Tag Archives: Kits

180º Wall Mount Hinge for 1/4″ Glass

Catalog Number: 3802009
Finish: SILVER

#
Provides the Appearance of a Heavy Glass Unit While You Actually Supply Only 1/4″ (6 mm) Glass

This CRL Frameless Dual Configuration Enclosure Kit has two possible configurations:

Finishes:

90º Wall Mount Hinge for 1/4″ Glass

Catalog Number: 3802006
Finish: SILVER

#
Provides Appearance of a Heavy Glass Unit While You Actually Supply Only 1/4″ (6 mm) Glass

This CRL Frameless Dual Configuration Enclosure Kit has two possible configurations:

Finishes:

CRL Slider Kits for 3/8″ Glass 60″ Wide x 72″ High

Catalog Number: S386072BA
Finish: BRITE ANODIZED

#
New and Improved Roller System Provides Smooth Gliding Panels With the Touch of a Finger
#
Bonded Hanger System for Easy Installation
#
# Bolt-Through Hanger System Available on Special Order Custom Units Available

Our new CRL Frameless Double KD Slider Kits provide all the extrusions necessary for installation (header, top hanger rails, bottom track and side jambs), and include a 24 inch (610 millimeter) towel bar, knob, rollers, guide and installation hardware. The glass and silicone sealer are supplied by the installer. The easy to clean bottom track utilizes a center mounted guide. Available in custom sizes, configurations and finishes by contacting CRL Technical Sales.

Finishes:

CRL Slider Kits for 3/8″ Glass 60″ Wide x 60″ High

Catalog Number: S386060BA
Finish: BRITE ANODIZED

#
New and Improved Roller System Provides Smooth Gliding Panels With the Touch of a Finger
#
Bonded Hanger System for Easy Installation
#
# Bolt-Through Hanger System Available on Special Order Custom Units Available

Our new CRL Frameless Double Door KD Slider Kits provide all the extrusions necessary for installation (header, top hanger rails, bottom track and side jambs), and also include a 24 inch (610 millimeter) towel bar, knob, guide, rollers and installation hardware. The easy to clean bottom track utilizes a center mounted guide. Available in custom sizes, configurations and finishes by contacting CRL Technical Sales.

Finishes:

CRL Slider Kits for 1/4″ Glass 60″ Wide x 72″ High

Catalog Number: S146072BA
Finish: BRITE ANODIZED

#
New and Improved Roller System Provides Smooth Gliding Panels With the Touch of a Finger
#
Bonded Hanger System for Easy Installation
#
# Bolt-Through Hanger System Available on Special Order Custom Units Available

Our new CRL Frameless Double “MK” Series Slider Kits provide all the extrusions necessary for installation (header, top hanger rails, bottom track and side jambs), and include a 24 inch (610 millimeter) towel bar, knob, rollers, guide and installation hardware. The glass and silicone sealer are supplied by the installer. The easy to clean bottom track utilizes a center mounted guide. Available in custom sizes, configurations and finishes by contacting CRL Technical Sales.

Finishes:

CRL Slider Kits for 1/4″ Glass 60″ Wide x 60″ High

Catalog Number: S146060BA
Finish: BRITE ANODIZED

#
New and Improved Roller System Provides Smooth Gliding Panels With the Touch of a Finger
#
Bonded Hanger System for Easy Installation
#
# Bolt-Through Hanger System Available on Special Order Custom Units Available

Our new CRL Frameless Double KD Slider Kits provide all the extrusions necessary for installation (header, top hanger rails, bottom track and side jambs), and include a 24 inch (610 millimeter) towel bar, knob, rollers, guide and installation hardware. The glass and silicone sealer are supplied by the installer. The easy to clean bottom track utilizes a center mounted guide. Available in custom sizes, configurations and finishes by contacting CRL Technical Sales.

Finishes:

CRL Hardware Pack for Cottage Series Sliding Shower Kits

Catalog Number: DK68B

#
Designed for 3/8″ (10 mm) glass
#
Available in Brite Anodized/Brushed Nickel, Brite Gold Anodized, and Oil Rubbed Bronze Finishes

This CRL Hardware Package for Cottage Series Sliding Shower Kits is available in matching finishes. It includes: Screws, Bumpers and Plastic anchors.
Finishes:

CRL Bottom Guides for Cottage Series Sliding Shower Doors

Catalog Number: DK6914

#
Designed for 1/4″ (6 mm) Glass

CRL Bottom Guide for CK/DK Cottage Series Sliders components add versatility to our Frameless Sliding Shower Door Kits, and allows you the option of adding additional panels to create a designer enclosure, or simply construct your own sliding unit by combining the various parts. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

CRL Wall Jamb for CK/DK Cottage/EK Suite Series Sliders

Catalog Number: DK7080BA
Finish: BRITE ANODIZED

#
Simply Field Fabricate As Desired
#
Jamb Can Be Cut at a Taper to Fill Vertical Gap When Glass Should Have Been Cut Out of Square But Was Not

CRL Tapered Wall Jambs for CK/DK Cottage and EK Suite Series Sliders add versatility to our Frameless Sliding Shower Door Kits. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

CRL Custom Tapered Wall Jamb for CK/DK Cottage/EK Suite Series Sliders

Catalog Number: DK70BA
Finish: BRITE ANODIZED

#
Individual Supplementary Extrusions and Hardware Components to Convert Our Frameless Shower Door Kits Into Angled Enclosures or Wider Inline Units
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Tapered Wall Jambs for CK/DK Cottage and EK Suite Series Sliders add versatility to our Frameless Sliding Shower Door Kits. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

CRL Sill Adaptor for CK/DK Cottage/EK Suite Series Sliders

Catalog Number: DK71720RB
Finish: OIL RUBBED BRONZE

#
Simply Field Fabricate As Desired
#
Bottom Sill Spacer Can Be Cut at a Taper to Bring the Bottom Sill to a Level Position

CRL Tapered Sill Adapter for CK/DK Cottage and EK Suite Series Sliders add versatility to our Frameless Sliding Shower Door Kits. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

CRL Custom Tapered Sill Adaptor for CK/DK Cottage/EK Suite Series Sliders

Catalog Number: DK71BA
Finish: BRITE ANODIZED

#
Individual Supplementary Extrusions and Hardware Components to Convert Our Frameless Shower Door Kits Into Angled Enclosures or Wider Inline Units
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Tapered Sill Adapter for CK/DK Cottage and EK Suite Series Sliders add versatility to our Frameless Sliding Shower Door Kits. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

CRL EK Series Outside Top Hanger Bracket

Catalog Number: EK670BA
Finish: BRITE ANODIZED

#
Several Architectural Finishes Available
#
Component to “EK” Series Shower Kits

This CRL Outside or Exterior Side Top Hanger Bracket is used with the EK Series Slider Kit. Works in conjunction with Interior Top Hangers Cat. No. EK671.

Finishes:

CRL EK Series Inside Top Hanger Bracket

Catalog Number: EK671BA
Finish: BRITE ANODIZED

#
Several Architectural Finishes Available
#
Component Item to The “EK” Series Shower Sliders

This CRL Inside or Interior Side Top Hanger Bracket is used with EK Series Slider Kit. Works in conjunction with Exterior Top Hangers cat. No. EK670.

Finishes:

CRL 121″ Header for Suite “EK” Series Sliders

Catalog Number: EK61121BA
Finish: BRITE ANODIZED

#
Several Designer Finishes Available
#
For 1/4″ (6 mm) Glass
#
Low profile 2-1/4″ (57 mm) Header is Reversible So You Can Expose Either the Curved or Flat Side

CRL component items for our new “EK” Suite Series Frameless Sliding Shower Doors are ideal for use as replacement parts, or for units you wish to fabricate yourself. Stock lengths of the Extrusions, individual Towel Bars, Knobs, and accessory hardware provide all of the options you need to build your own inline enclosures for 1/4 inch (6 millimeter) glass. You can also send our Technical Sales Shower Door Department a drawing of the enclosure. They will be happy to quote a custom unit.

Finishes:

CRL 61″ Header for Suite “EK” Series Sliders

Catalog Number: EK61BA
Finish: BRITE ANODIZED

#
Several Designer Finishes Available
#
For 1/4″ (6 mm) Glass
#
Low profile 2-9/16″ (65 mm) Header is Reversible So You Can Expose Either the Curved or Flat Side

CRL component items for our new “EK” Suite Series Frameless Sliding Shower Doors are ideal for use as replacement parts, or for units you wish to fabricate yourself. Stock lengths of the Extrusions, individual Towel Bars, Knobs, and accessory hardware provide all of the options you need to build your own inline enclosures for 1/4 inch (6 millimeter) glass. You can also send our Technical Sales Shower Door Department a drawing of the enclosure. They will be happy to quote a custom unit.

Finishes:

CRL 98″ T-Seal Polycarbonate

Catalog Number: DK98T

#
Vinyl Seals Used Glass-to-Glass or Glass-to-Wall

Polycarbonates Seals adhere to the glass or wall using our Clear Very Hi-Bond Tape.

Finishes:

CRL 98″ L-Seal Polycarbonate

Catalog Number: DK98L

#
This is a Frameless Sliding Shower Enclosure Component
#
Vinyl Seals Used Glass-to-Glass or Glass-to-Wall

Polycarbonates Seals adhere to the glass or wall using our Clear Very Hi-Bond Tape.

Finishes:

CRL Top Hanger Bracket for 1/2″

Catalog Number: DK67BA
Finish: BRITE ANODIZED

#
Roller Bracket Assembly Used in Cottage Series Applications for 1/4″ (6 mm) Glass
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Top Hanger for CK/DK Cottage Series Sliders components add versatility to our Frameless Sliding Shower Door Kits, and allows you the option of adding additional panels to create a designer enclosure, or simply construct your own sliding unit by combining the various parts. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

CRL Top Hanger Bracket for 3/8″

Catalog Number: DK66BA
Finish: BRITE ANODIZED

#
Roller Bracket Assembly Used in Cottage Series Applications for 3/8″ (10 mm) Glass
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Top Hanger for CK/DK Cottage Series Sliders components add versatility to our Frameless Sliding Shower Door Kits, and allows you the option of adding additional panels to create a designer enclosure, or simply construct your own sliding unit by combining the various parts. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

CRL 80″ Side Jamb

Catalog Number: DK65BA
Finish: BRITE ANODIZED

#
Side Jamb is Used Against the Vertical Wall in “DK” Series Slider Applications
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Side Jamb for CK/DK Cottage Series Sliders components add versatility to our Frameless Sliding Shower Door Kits, and allows you the option of adding additional panels to create a designer enclosure, or simply construct your own sliding unit by combining the various parts. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

CRL 144″ Shower Side Jamb

Catalog Number: DK65144BA
Finish: BRITE ANODIZED

#
Side Jamb is Used Against the Vertical Wall in “DK” Series Slider Applications
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Side Jamb for CK/DK Cottage Series Sliders components add versatility to our Frameless Sliding Shower Door Kits, and allows you the option of adding additional panels to create a designer enclosure, or simply construct your own sliding unit by combining the various parts. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

CRL 72″ Sidelite Sill

Catalog Number: DK64BA
Finish: BRITE ANODIZED

#
Sidelite Sill Used in Cottage Series Applications Where Fixed Panel is Same Height as Doors
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Sidelite Sill for CK/DK Cottage Series Sliders components add versatility to our Frameless Sliding Shower Door Kits, and allows you the option of adding additional panels to create a designer enclosure, or simply construct your own sliding unit by combining the various parts. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

CRL 144″ Shower Sidelite Sill

Catalog Number: DK64144BA
Finish: BRITE ANODIZED

#
Sidelite Sill Used in Cottage Series Applications Where Fixed Panel is Same Height as Doors
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Sidelite Sill for CK/DK Cottage Series Sliders components add versatility to our Frameless Sliding Shower Door Kits, and allows you the option of adding additional panels to create a designer enclosure, or simply construct your own sliding unit by combining the various parts. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

CRL 72″ Bottom Sill


Catalog Number: DK63BA
Finish: BRITE ANODIZED

#
# Individual Supplementary Extrusions and Hardware Components to Convert Our Frameless Shower Door Kits Into Angled Enclosures or Wider Inline Units Bottom Sill Extrusion Used in All Cottage Series Applications
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Bottom Sill for CK/DK Cottage Series Sliders components add versatility to our Frameless Sliding Shower Door Kits, and allows you the option of adding additional panels to create a designer enclosure, or simply construct your own sliding unit by combining the various parts. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

CRL 144″ Shower Bottom Sill

Catalog Number: DK63144BA
Finish: BRITE ANODIZED

#
# Individual Supplementary Extrusions and Hardware Components to Convert Our Frameless Shower Door Kits Into Angled Enclosures or Wider Inline Units Bottom Sill Extrusion Used in All Cottage Series Applications
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Bottom Sill for CK/DK Cottage Series Sliders components add versatility to our Frameless Sliding Shower Door Kits, and allows you the option of adding additional panels to create a designer enclosure, or simply construct your own sliding unit by combining the various parts. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

CRL 72″ Header Filler

Catalog Number: DK62BA
Finish: BRITE ANODIZED

#
# Individual Supplementary Extrusions and Hardware Components to Convert Our Frameless Shower Door Kits Into Angled Enclosures or Wider Inline Units Header Filler Used Where Fixed Panels are Located
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Header Filler for CK/DK Cottage Series Sliders components add versatility to our Frameless Sliding Shower Door Kits, and allows you the option of adding additional panels to create a designer enclosure, or simply construct your own sliding unit by combining the various parts. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

CRL 144″ Shower Header Filler


Catalog Number: DK62144BA
Finish: BRITE ANODIZED

#
# Components to Convert Our Frameless Shower Door Kits Into Angled Enclosures or Wider Inline Units Header Filler Used Where Fixed Panels are Located
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Header Filler for CK/DK Cottage Series Sliders components add versatility to our Frameless Sliding Shower Door Kits, and allows you the option of adding additional panels to create a designer enclosure, or simply construct your own sliding unit by combining the various parts. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

CRL 72″ Shower Header

Catalog Number: DK61BA
Finish: BRITE ANODIZED

#
# Individual Supplementary Extrusions and Hardware Components to Convert Our Frameless Shower Door Kits Into Angled Enclosures or Wider Inline Units Top Header Extrusion Acts as a Crown, and is Used in All Cottage Series Applications
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Header for CK/DK Cottage Series Sliders components add versatility to our Frameless Sliding Shower Door Kits, and allows you the option of adding additional panels to create a designer enclosure, or simply construct your own sliding unit by combining the various parts. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

CRL 144″ Shower Header

Catalog Number: DK61144BA
Finish: BRITE ANODIZED

#
Individual Supplementary Extrusions and Hardware Components to Convert Our Frameless Shower Door Kits Into Angled Enclosures or Wider Inline Units
#
Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze Finishes to Match Our Kits
#
Do It Yourself, or You Can Send Us a Drawing to Customize a Unit for You

CRL Header for CK/DK Cottage Series Sliders components add versatility to our Frameless Sliding Shower Door Kits, and allows you the option of adding additional panels to create a designer enclosure, or simply construct your own sliding unit by combining the various parts. Stock lengths of Headers, Header Fillers, Bottom Sills, Sidelite Sills, Side Jambs, Top Hangers and other accessory items complete the selection.

Finishes:

CRL Replacement Hinge for KD Door Kits

Catalog Number: MH1CH
Finish: BRITE ANODIZED

For 1/4″ (6 mm) Glass
Requires 1″ (25 mm) Hole in Glass Per Hinge
Works with HDK Series Frameless KD Shower Door Kits

These CRL Mini Hinges are designed to work with our HDK Series Frameless KD Shower Door Kits. They allow the look of heavy glass, while utilizing lower cost 1/4 inch (6 millimeter) thick glass. The hinges are applied through a 1 inch (25 millimeter) hole, and feature a molded nylon insert that allows a 3/16 inch (5 millimeter) horizontal adjustment in each direction. Minimum order is one each.

Finishes:

CRL 72″ High Frameless Hinge KD Kits

Catalog Number: HDK72BA
Finish: BRITE ANODIZED

Provides the Appearance of a Heavy Glass Unit While You Actually Supply Only 1/4″ (6 mm) Glass
Door is Manually Closed and Has a Magnetic Hold
Requires Only Two Holes in Glass

The CRL Frameless Hinge KD Door Kit allows the look of heavy glass, while lowering cost by utilizing 1/4 inch (6 millimeter) thick glass (not included). The hinges are applied through a one inch (25.4 millimeter) hole that is placed 1-1/4 inches (31.8 millimeters) from the edge of the glass.

Finishes:

CRL 64″ High Frameless Hinge KD Kits

Catalog Number: HDK64BA
Finish: BRITE ANODIZED

Provides the Appearance of a Heavy Glass Unit While You Actually Supply Only 1/4″ (6 mm) Glass
Door is Manually Closed and Has a Magnetic Hold
Requires Only Two Holes in Glass

The CRL Frameless Hinge KD Door Kit allows the look of heavy glass, while lowering cost by utilizing 1/4 inch (6 millimeter) thick glass (not included). The hinges are applied through a one inch (25.4 millimeter) hole that is placed 1-1/4 inches (31.8 millimeters) from the edge of the glass.

Finishes:

CRL Top Rail for 1/4″ Glass

Catalog Number: TR7214BA
Finish: BRITE ANODIZED

Concealed Overhead Roller Design Allows Greater Glass Exposure, Less Metal Exposure
Extruded Aluminum
For 1/4″ (6 mm) Thick Glass

This CRL Top Hanger for 1/4″ Glass is a replacement hanger for the S386060 Series Slider Kit. The same hanger TR72 for 3/8 inch (10 millimeter) is also available.

Finishes:

CRL Top Hanger Rail for 3/8″ Glass

Catalog Number: TR72BA
Finish: BRITE ANODIZED

Concealed Overhead Roller Design Allows Greater Glass Exposure, Less Metal Exposure
Extruded Aluminum
For 3/8″ (10 mm) Thick Glass

This CRL Top Hanger for 3/8″ Glass is a replacement hanger for the S386060 Series Slider Kit. The same hanger TR7214 for 1/4 inch (6 millimeter) is also available.

Finishes:

CRL Side Jamb for 3/8″ Glass

Catalog Number: SJ72BA
Finish: BRITE ANODIZED

Concealed Overhead Roller Design Allows Greater Glass Exposure, Less Metal Exposure
Extruded Aluminum
For Both 1/4″ and 3/8″ (6 and 10 mm) Glass

This CRL Side Rail for 1/4″ and 3/8″ Glass is a replacement rail for the S386060 Series Slider Kit.

Finishes:

CRL Header Extrusion for 3/8″ Glass

Catalog Number: H72BA
Finish: BRITE ANODIZED

Concealed Overhead Roller Design Allows Greater Glass Exposure, Less Metal Exposure
Extruded Aluminum
For Use With 3/8″ (10 mm) Thick Glass

This CRL Header for 3/8″ Glass is a replacement header for the S386060 Series Slider Kit.

Finishes:

CRL Header Extrusion for 1/4″ Glass

Catalog Number: H7214BA
Finish: BRITE ANODIZED

Concealed Overhead Roller Design Allows Greater Glass Exposure, Less Metal Exposure
Extruded Aluminum
For Use With 1/4″ (6 mm) Thick Glass

This CRL Header for 1/4″ Glass is a replacement header for the S1460 Series Slider Kit.

Finishes:

CRL Hardware Package for 3/8″ Glass

Catalog Number: HP38BA
Finish: BRITE ANODIZED

For Use With CRL “MK” Frameless Sliding Door Extrusions
Use With 3/8″ (10 mm) Thick Glass

CRL Hardware Package Kits provide all the hardware necessary for installation of the header, top hanger rails, bottom track and side jambs. The Kit contains screws, rollers, guides and other miscellaneous installation hardware as shown. The extrusions, glass and silicone sealer are supplied by the installer. The Hardware Package does not include Towel Bar or Knob.

Finishes:

CRL Hardware Package for 1/4″ Glass

Catalog Number: HP14BA
Finish: BRITE ANODIZED

For Use With CRL “MK” Frameless Sliding Door Extrusions
Use With 1/4″ (6 mm) Thick Glass

CRL Hardware Package Kits provide all the hardware necessary for installation of the header, top hanger rails, bottom track and side jambs. The Kit contains screws, rollers, guides and other miscellaneous installation hardware as shown. The extrusions, glass and silicone sealer are supplied by the installer. The Hardware Package does not include Towel Bar or Knob.

Finishes:

CRL Bottom Track for 3/8″ Glass

Catalog Number: BT72BA
Finish: BRITE ANODIZED

Concealed Overhead Roller Design Allows Greater Glass Exposure, Less Metal Exposure
Extruded Aluminum
For Both 1/4″ and 3/8″ (6 and 10 mm) Glass

This CRL Bottom Track for 1/4″ and 3/8″ Glass is a replacement track for the S386060 Series Slider Kit.

Finishes:

CRL 78″ Pinnacle Hinge Kit

Catalog Number: P1N03378CH
Finish: CHROME

Includes Hinges, Extrusion and Vinyl Seal
Designed for 3/8″ (10 mm) Glass
5 Degree Hinge Pins Ensure Positive Closure to Provide a Water Resistant Seal at Both the Sides and the Bottom
Self-Centering From 15 Degrees

This CRL Pinnacle Hinge Kit is designed for 3/8 inch (10 millimeter) glass and has the hinges already attached to aluminum extrusion in lengths of either 72 or 78 inches (1.83 or 1.98 meters). The Kit also includes an aluminum extrusion for the strike side as well as a 36 inch (914 millimeter) length of P990WS Bottom Sweep including mounting screws.

Finishes:

CRL 78″ Geneva Hinge Kit

Catalog Number: GEN03378CH
Finish: CHROME

Includes Hinges, Extrusion and Vinyl Seal
Designed for 3/8″ (10 mm) Glass
5 Degree Hinge Pins Ensure Positive Closure to Provide a Water Resistant Seal at Both the Sides and the Bottom
Self-Centering From 15 Degrees

This CRL Geneva Hinge Kit is designed for 3/8 inch (10 millimeter) glass and has the hinges already attached to aluminum extrusion in lengths of either 72 or 78 inches (1.83 or 1.98 meters). The Kit also includes an aluminum extrusion for the strike side as well as a 36 inch (914 millimeter) length of P990WS Bottom Sweep including mounting screws.

Finishes:

CRL 72″ Vienna Hinge Kit

Catalog Number: V1E03372CH
Finish: CHROME

Includes Hinges, Extrusion and Vinyl Seal
Designed for 3/8″ or 1/2″ (10 or 12 mm) Glass
5 Degree Hinge Pins Ensure Positive Closure to Provide a Water Resistant Seal at Both the Sides and the Bottom
Self-Centering From 15 Degrees

This CRL Vienna Hinge Kit is designed for both 3/8 and 1/2 inch (10 and 12 millimeter) glass and has the hinges already attached to aluminum extrusion in 72 inch (1.83 meter) lengths. The Kit also includes an aluminum extrusion for the strike side as well as a 36 inch (914 millimeter) length of P990WS Bottom Sweep including mounting screws.

Finishes:

CRL 72″ Pinnacle Hinge Kit

Catalog Number: P1N03372CH
Finish: CHROME

Includes Hinges, Extrusion and Vinyl Seal
Designed for 3/8″ (10 mm) Glass
5 Degree Hinge Pins Ensure Positive Closure to Provide a Water Resistant Seal at Both the Sides and the Bottom
Self-Centering From 15 Degrees

This CRL Pinnacle Hinge Kit is designed for 3/8 inch (10 millimeter) glass and has the hinges already attached to aluminum extrusion in lengths of either 72 or 78 inches (1.83 or 1.98 meters). The Kit also includes an aluminum extrusion for the strike side as well as a 36 inch (914 millimeter) length of P990WS Bottom Sweep including mounting screws.

Finishes:

CRL 72″ Geneva Hinge Kit

Catalog Number: GEN03372CH
Finish: CHROME

Includes Hinges, Extrusion and Vinyl Seal
Designed for 3/8″ (10 mm) Glass
5 Degree Hinge Pins Ensure Positive Closure to Provide a Water Resistant Seal at Both the Sides and the Bottom
Self-Centering From 15 Degrees

This CRL Geneva Hinge Kit is designed for 3/8 inch (10 millimeter) glass and has the hinges already attached to aluminum extrusion in lengths of either 72 or 78 inches (1.83 or 1.98 meters). The Kit also includes an aluminum extrusion for the strike side as well as a 36 inch (914 millimeter) length of P990WS Bottom Sweep including mounting screws.

Finishes:

CRL Hardware Pack for Suite Series Sliding Shower Kits

Catalog Number: EK68B

Designed for 1/4″ (6 mm) glass
Available in Brite Anodized, Brite Gold Anodized, Brushed Nickel and Oil Rubbed Bronze Finishes

This CRL Hardware Package for Suite Series Sliding Shower Kits is available in matching finishes. It includes: Screws, Bumpers and Plastic anchors.

Finishes:

CRL Hydroslide Wall Mount Hinge

Catalog Number: HYDH0370RB
Finish: OIL RUBBED BRONZE

Wall Mount and Glass-to-Glass Models
Allows Door to Bi-Fold Into Enclosure
Several Finishes to Match Hyroslide System

CRL Hydroslide Bi-Fold Hinges add a different element to the already popular Hydroslide System. Instead of a standard sliding door, you can now “Bi-Fold” two sliding panels of glass into the shower enclosure, creating a larger opening than the single sliding door will allow. Made of solid brass and available in four popular finishes, the Hydroslide Bi-Fold Hinges require holes in the glass. Minimum order is one each.

Finishes:

CRL Oil Rubbed Bronze Hydroslide Bi-Fold Glass-to-Glass Hinge

Catalog Number: HYDH0370RB
Finish: OIL RUBBED BRONZE

Wall Mount and Glass-to-Glass Models
Allows Door to Bi-Fold Into Enclosure
Several Finishes to Match Hyroslide System

CRL Hydroslide Bi-Fold Hinges add a different element to the already popular Hydroslide System. Instead of a standard sliding door, you can now “Bi-Fold” two sliding panels of glass into the shower enclosure, creating a larger opening than the single sliding door will allow. Made of solid brass and available in four popular finishes, the Hydroslide Bi-Fold Hinges require holes in the glass. Minimum order is one each.

Finishes:

CRL Hydroslide 90 Degree Header Connector Bracket

Catalog Number: HYDH90

Clean Sleek Lines
Quick and Easy Installation

Hydroslide component parts can be ordered as replacement parts, or you can order the individual parts to fabricate your own custom installation. CRL Hydroslide 90 Degree Header Connector Bracket is to be used when two Hydroslide doors come together in a 90 degree corner. NOTE: Sliding panels not to exceed 17 inches (432 millimeters) in width.

Finishes:

CRL Chrome Hydroslide 90 Degree Wall-to-Glass Bracket

Catalog Number: HYD05CH
Finish: CHROME

Clean Sleek Lines
Quick and Easy Installation
Available in Four Finishes

Hydroslide component parts can be ordered as replacement parts, or you can order the individual parts to fabricate your own custom installation. CRL Hydroslide 90 Degree Wall-to-Glass Bracket is for securing a glass panel at 90 degrees to the wall. Includes two Screws and Snap-In Screw Covers.

Finishes:

CRL Oil Rubbed Bronze Round Fixed Panel U-Clamp

Catalog Number: RC790RB
Finish: OIL RUBBED BRONZE

Clean Sleek Lines
Quick and Easy Installation
Available in Several Finishes
Glass Thickness Range: 5/16″ to 1/2″ (8 to 12 mm)

CRL Round Style Fixed Panel Clamps are made of solid brass and are designed to secure glass panels in contemporary shower enclosures. They assist in maintaining the frameless appearance and provide a clean looking alternative to U-Channel. The round shape of this clamp looks especially attractive when securing fixed panels of glass used with our Hydroslide Sliding Glass System, Vertical Post System, or hinge series such as Rondo and Classique. All clamps feature solid brass construction and a variety of finishes to match our Shower Door Hinges. Glass must be drilled with 5/8 or 3/4 inch (16 or 19 millimeter) diameter holes to accept clamps. Appropriate mounting screws and one set of clear gaskets are included with each clamp. Additional gaskets (UCG77) may be ordered separately.

Finishes:

CRL Hydroslide 90 Degree Wall-to-Upper Track Connector

Catalog Number: HYDW90

Clean Sleek Lines
Quick and Easy Installation

Hydroslide component parts can be ordered as replacement parts, or you can order the individual parts to fabricate your own custom installation. CRL Hydroslide 90 Degree Wall-to-Upper Track Connector is for attaching the Sliding Shower Door Upper Track to a 90 degree wall.

Finishes:

CRL Chrome Hydroslide 90 Degree Glass-to-Sliding Track Connector

Catalog Number: HYDG90CH
Finish: CHROME

Clean Sleek Lines
Quick and Easy Installation
Available in Four Finishes

Hydroslide component parts can be ordered as replacement parts, or you can order the individual parts to fabricate your own custom installation. CRL Hydroslide 90 Degree Glass-to-Sliding Track Connector is for attaching the fixed glass to the Sliding Shower Door Upper Track in 90 degree installations.

Finishes:

CRL 180 Degree Hydroslide Glass-to-Sliding Track Connector

Catalog Number: HYDG180CH
Finish: CHROME

Clean Sleek Lines
Quick and Easy Installation
Available in Four Finishes

Hydroslide component parts can be ordered as replacement parts, or you can order the individual parts to fabricate your own custom installation. CRL 180 Degree Glass-to-Sliding Track Connector is for attaching the fixed glass to the Sliding Shower Door Upper Track in 180 degree installations.

Finishes:

CRL Hydroslide Sliding Door Floor Guide Kit

Catalog Number: HYD03CH
Finish: CHROME

Clean Sleek Lines
Quick and Easy Installation
Available in Four Finishes

Hydroslide component parts can be ordered as replacement parts, or you can order the individual parts to fabricate your own custom installation. CRL Hydroslide Sliding Door Floor Guide Kit consists of one Floor Guide and two Screws.

Finishes:

CRL Chrome Hydroslide Snap-In Screw Cover Kit

Catalog Number: HYD04CH
Finish: CHROME

Quick and Easy Installation
Available in Four Finishes

Hydroslide component parts can be ordered as replacement parts, or you can order the individual parts to fabricate your own custom installation. CRL Hydroslide Snap-In Screw Cover Kit consists of two Snap-In Screw Covers.

Finishes:

CRL Hydroslide Sliding Door Roller Stop Kit

Catalog Number: HYD02

Quick and Easy Installation

Hydroslide component parts can be ordered as replacement parts, or you can order the individual parts to fabricate your own custom installation. CRL Hydroslide Roller Stop Kit consists of two Roller Stops and Screws.

Finishes:

CRL Hydroslide Sliding Door Hanger Kit

Catalog Number: HYD01CH
Finish: CHROME

Clean Sleek Lines
Quick and Easy Installation
Available in Four Finishes

Hydroslide component parts can be ordered as replacement parts, or you can order the individual parts to fabricate your own custom installation. CRL Hydroslide Sliding Door Hanger Kit consists of two Rollers, two Glass Hangers, and two Snap-In Screw Covers.

Finishes:

CRL 60″ Hydroslide Sliding Shower Door Upper Track

Catalog Number: HYD60BA
Finish: BRITE ANODIZED

Clean Sleek Lines
Quick and Easy Installation
Available in Four Finishes

Hydroslide component parts can be ordered as replacement parts, or you can order the individual parts to fabricate your own custom installation. CRL Hydroslide Sliding Shower Door Upper Track is an extruded aluminum track available in two lengths and four finishes. The Track can be easily cut to length for your installation.

Finishes:

CRL 84″ Hydroslide Sliding Shower Door Upper Track

Catalog Number: HYD84BA
Finish: BRITE ANODIZED

Clean Sleek Lines
Quick and Easy Installation
Available in Four Finishes

Hydroslide component parts can be ordered as replacement parts, or you can order the individual parts to fabricate your own custom installation. CRL Hydroslide Sliding Shower Door Upper Track is an extruded aluminum track available in two lengths and four finishes. The Track can be easily cut to length for your installation.

Finishes:

CRL Suite “EK” Series Shower Kits 60″ x 60″

Catalog Number: EK146060BA
Finish: BRITE ANODIZED

Designed for Use With 1/4″ (6 mm) Tempered Glass
Low Profile 2-9/16″ (65 mm) Header is Reversible So You Can Expose Either the Curved or Flat Side
Clamp-On Hanger Bracket Eliminates Glass Drilling
Two Stock Sizes in Designer Finishes Available
Custom Size and Finish Units Also Available

CRL’s Suite “EK” Series Frameless Sliding Shower Door Kits for 1/4 inch (6 millimeter) thick glass provides an alternative design and mounting method to our Deluxe Cottage Series Sliders. The Hanger Bracket is a cost-reducing device, as it clamps directly onto the glass and eliminates the need for drilling holes (set screws only). The brackets allow for smooth, quiet operation and long service life at a lower cost. The specially designed Header is reversible so the customer has the choice of using the gently curved side, or the flat side with top and bottom edge bevels. Two popular stock sizes are available: 60 inch wide x 60 inch high (1.52 x 1.52 meters) and 60 inch wide x 72 inch high (1.52 x 1.83 meters).

Finishes:

CRL 90 Degree Hydroslide Wall-to-Glass Accessory Kits

Catalog Number: HYDA9CH
Finish: CHROME

Excellent Design for Compact Areas
Clean Sleek Lines
Quick and Easy Installation
Available in Four Finishes
Accommodates a Wide Range of Shower Designs
Patent Pending

CRL Hydroslide Sliding Shower Door Kits were designed for full standing showers or above bathtubs. The Hydroslide System can accommodate a wide range of shower designs with fixed glass panels on either end, or both sides at 90 or 180 degrees. The Hydroslide System also accommodates the option of floor-to-near-ceiling glass panels with a sliding door. CRL Hydroslide Sliding Shower Door Kits feature the latest European ‘all-glass’ look. Kits are available in either 60 or 84 inch (1524 or 2134 millimeter) widths. Installers can cut the width to size, and height is optional as long as the sliding door glass weighs less than 88 pounds (40 kilograms). The 180 Degree Wall-to-Wall Installation only requires the 180 Degree Standard Kit for the installation. Individual or replacement parts can also be ordered. Bottom Glass Attachments, Thresholds, and Handles or Knobs must be ordered separately. CRL Hydroslide Kits come in four finishes; Chrome Fittings with a Brite Anodized Sliding track, polished Brass with a Brite Gold Anodized Sliding track, Brushed Nickel with Brushed Nickel Anodized Sliding Track, and Oil Rubbed Bronze Anodized Sliding Track. Each Kit comes with complete fabrication and installation instructions. 90 Degree Wall-to-Glass Accessory Kit consists of: One 90 Degree Glass-to-sliding Track Connector, and One 90 Degree Wall-to-Glass Bracket.

Finishes:

CRL 84″ 180 Degree Hydroslide Standard Kits

Catalog Number: HYDK84CH
Finish: CHROME

Excellent Design for Compact Areas
Clean Sleek Lines
Quick and Easy Installation
Available in Four Finishes
Accommodates a Wide Range of Shower Designs
Patent Pending

CRL Hydroslide Sliding Shower Door Kits were designed for full standing showers or above bathtubs. The Hydroslide System can accommodate a wide range of shower designs with fixed glass panels on either end, or both sides at 90 or 180 degrees. The Hydroslide System also accommodates the option of floor-to-near-ceiling glass panels with a sliding door. CRL Hydroslide Sliding Shower Door Kits feature the latest European ‘all-glass’ look. Kits are available in either 60 or 84 inch (1524 or 2134 millimeter) widths. Installers can cut the width to size, and height is optional as long as the sliding door glass weighs less than 88 pounds (40 kilograms). The 180 Degree Wall-to-Wall Installation only requires the 180 Degree Standard Kit for the installation. Individual or replacement parts can also be ordered. Bottom Glass Attachments, Thresholds, and Handles or Knobs must be ordered separately. CRL Hydroslide Kits come in four finishes; Chrome Fittings with a Brite Anodized Sliding track, polished Brass with a Brite Gold Anodized Sliding track, Brushed Nickel with Brushed Nickel Anodized Sliding Track, and Oil Rubbed Bronze Anodized Sliding Track. Each Kit comes with complete fabrication and installation instructions. 180 Degree Standard Kit consists of: One Sliding Glass Door Upper Track, Two Hangers for Sliding Glass Door, Two Sliding Glass Door Rollers, Two Sliding Glass Door Roller Stops, One Sliding Glass Door Floor Guide, Two 90 Degree Wall-to-Upper Track Connectors, Two 180 Degree Glass-to-Sliding Track Connectors One each 36″ (914 mm) Half-Round SDT980 Threshold, and One each 98″ (2489 mm) DK98L L-Seal for wall.

Finishes:

CRL 60″ 180 Degree Hydroslide Standard Kits

Catalog Number: HYDK60CH
Finish: CHROME

Excellent Design for Compact Areas
Clean Sleek Lines
Quick and Easy Installation
Available in Four Finishes
Accommodates a Wide Range of Shower Designs
Patent Pending

CRL Hydroslide Sliding Shower Door Kits were designed for full standing showers or above bathtubs. The Hydroslide System can accommodate a wide range of shower designs with fixed glass panels on either end, or both sides at 90 or 180 degrees. The Hydroslide System also accommodates the option of floor-to-near-ceiling glass panels with a sliding door. CRL Hydroslide Sliding Shower Door Kits feature the latest European ‘all-glass’ look. Kits are available in either 60 or 84 inch (1524 or 2134 millimeter) widths. Installers can cut the width to size, and height is optional as long as the sliding door glass weighs less than 88 pounds (40 kilograms). The 180 Degree Wall-to-Wall Installation only requires the 180 Degree Standard Kit for the installation. Individual or replacement parts can also be ordered. Bottom Glass Attachments, Thresholds, and Handles or Knobs must be ordered separately. CRL Hydroslide Kits come in four finishes; Chrome Fittings with a Brite Anodized Sliding track, polished Brass with a Brite Gold Anodized Sliding track, Brushed Nickel with Brushed Nickel Anodized Sliding Track, and Oil Rubbed Bronze Anodized Sliding Track. Each Kit comes with complete fabrication and installation instructions. 180 Degree Standard Kit consists of: One Sliding Glass Door Upper Track, Two Hangers for Sliding Glass Door, Two Sliding Glass Door Rollers, Two Sliding Glass Door Roller Stops, One Sliding Glass Door Floor Guide, Two 90 Degree Wall-to-Upper Track Connectors, Two 180 Degree Glass-to-Sliding Track Connectors, One each 36″ (914 mm) Half-Round SDT980 Threshold, and One each 98″ (2489 mm) DK98L L-Seal for wall.

Finishes:

CRL Cottage Style 72″ x 60″ Kit for 1/4″ Glass

Catalog Number: DK147260BA
Finish: BRITE ANODIZED

Designed for 1/4″ (6 mm) Glass. Bolt-Through Top Hangers Provide for Immediate Fabrication and Installation
Brite Anodized, Brite Gold Anodized, Brushed Nickel and Oil Rubbed Bronze finishes are available in Stock Sizes. Utilizes Traditional Metal Side Jambs.
Custom Cut-to-Size Units Available

Cottage Series DK Sliders utilize metal side jambs for a traditional frameless sliding shower door appearance. Bolt-Through Top Hangers allow immediate fabrication and installation, with no waiting for messy adhesive to dry. Our DK Series Kits come in Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze finishes, with other finishes available on special order. The top hung stock units include: Extruded Aluminum Header, Side Jambs, and Bottom Sill; Top Hangers for 1/4 inch (6 millimeter) glass, Back-to-Back Knob, 24 inch (610 millimeter) Towel Bar, Nylon Rollers, Bottom Guide, Screws, and Bumpers. Tempered glass and silicone sealant are supplied by the installer to complete the installation. Since all rollers are overhead, the Bottom Sill and Side Jambs are uncluttered, making cleaning easy. Available in up to six stock sizes. Extrusions, Bottom Guides, Hardware Packages, plus other accessories may be ordered separately. Custom Kits are available in multiple configurations and are cut-to-size for easy field installation, click here to inquire about custom sizes.

Finishes:

CRL Cottage Style 60″ x 72″ Kit for 1/4″ Glass

Catalog Number: DK146072BA
Finish: BRITE ANODIZED

Designed for 1/4″ (6 mm) Glass
Bolt-Through Top Hangers Provide for Immediate Fabrication and Installation
Brite Anodized, Brite Gold Anodized, Brushed Nickel and Oil Rubbed Bronze finishes are available in Stock Sizes. Utilizes Traditional Metal Side Jambs.
Custom Cut-to-Size Units Available

Cottage Series DK Sliders utilize metal side jambs for a traditional frameless sliding shower door appearance. Bolt-Through Top Hangers allow immediate fabrication and installation, with no waiting for messy adhesive to dry. Our DK Series Kits come in Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze finishes, with other finishes available on special order. The top hung stock units include: Extruded Aluminum Header, Side Jambs, and Bottom Sill; Top Hangers for 1/4 inch (6 millimeter) glass, Back-to-Back Knob, 24 inch (610 millimeter) Towel Bar, Nylon Rollers, Bottom Guide, Screws, and Bumpers. Tempered glass and silicone sealant are supplied by the installer to complete the installation. Since all rollers are overhead, the Bottom Sill and Side Jambs are uncluttered, making cleaning easy. Available in up to six stock sizes. Extrusions, Bottom Guides, Hardware Packages, plus other accessories may be ordered separately. Custom Kits are available in multiple configurations and are cut-to-size for easy field installation, click here to inquire about custom sizes.

Finishes:

CRL Cottage Style 60″ x 60″ Kit for 1/4″ Glass

Catalog Number: DK146060BA
Finish: BRITE ANODIZED

Designed for 1/4″ (6 mm) Glass. Bolt-Through Top Hangers Provide for Immediate Fabrication and Installation
Brite Anodized, Brite Gold Anodized, Brushed Nickel and Oil Rubbed Bronze finishes are available in Stock Sizes. Utilizes Traditional Metal Side Jambs.
Custom Cut-to-Size Units Available

Cottage Series DK Sliders utilize metal side jambs for a traditional frameless sliding shower door appearance. Bolt-Through Top Hangers allow immediate fabrication and installation, with no waiting for messy adhesive to dry. Our DK Series Kits come in Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze finishes, with other finishes available on special order. The top hung stock units include: Extruded Aluminum Header, Side Jambs, and Bottom Sill; Top Hangers for 1/4 inch (6 millimeter) glass, Back-to-Back Knob, 24 inch (610 millimeter) Towel Bar, Nylon Rollers, Bottom Guide, Screws, and Bumpers. Tempered glass and silicone sealant are supplied by the installer to complete the installation. Since all rollers are overhead, the Bottom Sill and Side Jambs are uncluttered, making cleaning easy. Available in up to six stock sizes. Extrusions, Bottom Guides, Hardware Packages, plus other accessories may be ordered separately. Custom Kits are available in multiple configurations and are cut-to-size for easy field installation, click here to inquire about custom sizes.

Finishes:

CRL Cottage Style 72″ x 80″ Kit for 3/8″ Glass

Catalog Number: CK387280BA
Finish: BRITE ANODIZED

Designed for 3/8″ (10mm) Glass. Bolt-Through Top Hangers Provide for Immediate Fabrication and Installation
Brite Anodized, Brite Gold Anodized, Brushed Nickel and Oil Rubbed Bronze finishes are available in Stock Sizes. Utilizes Clear Polycarbonate Jambs Instead of Traditional Metal Jambs
Custom Cut-to-Size Units Available

Cottage Series CK Sliders are unique in that they utilize clear polycarbonate side jambs instead of traditional metal side jambs, thus providing more of the popular ‘all-glass’ look. Bolt-Through Top Hangers allow immediate fabrication and installation, with no waiting for messy adhesive to dry. Cottage Series Kits come in Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze finishes, with other finishes available on special order. The top hung stock units include: Header, Top Hangers for 1/4 inch (6 millimeter) or 3/8 inch (10 millimeter) glass, Clear Polycarbonate Side Jambs, Bottom Sill, Back-to-Back Knob, 24 inch (610 millimeter) Towel Bar, Nylon Rollers, Bottom Guide, Screws, and Bumpers. Tempered glass and silicone sealant are supplied by the installer to complete the installation. Since all rollers are overhead, the Bottom Sill and Clear Jambs are uncluttered, making cleaning easy. Available in up to six stock sizes. Extrusions, Bottom Guides, Hardware Packages, and other accessories may be ordered separately as well. Custom Kits are available in multiple configurations and are cut-to-size for easy field installation, click here to inquire about custom sizes.

Finishes:

CRL Cottage Style 72″ x 72″ Kit for 3/8″ Glass

Catalog Number: CK387272BA
Finish: BRITE ANODIZED

Designed for 3/8″ (10mm) Glass. Bolt-Through Top Hangers Provide for Immediate Fabrication and Installation
Brite Anodized, Brite Gold Anodized, Brushed Nickel and Oil Rubbed Bronze finishes are available in Stock Sizes. Utilizes Clear Polycarbonate Jambs Instead of Traditional Metal Jambs
Custom Cut-to-Size Units Available

Cottage Series CK Sliders are unique in that they utilize clear polycarbonate side jambs instead of traditional metal side jambs, thus providing more of the popular ‘all-glass’ look. Bolt-Through Top Hangers allow immediate fabrication and installation, with no waiting for messy adhesive to dry. Cottage Series Kits come in Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze finishes, with other finishes available on special order. The top hung stock units include: Header, Top Hangers for 1/4 inch (6 millimeter) or 3/8 inch (10 millimeter) glass, Clear Polycarbonate Side Jambs, Bottom Sill, Back-to-Back Knob, 24 inch (610 millimeter) Towel Bar, Nylon Rollers, Bottom Guide, Screws, and Bumpers. Tempered glass and silicone sealant are supplied by the installer to complete the installation. Since all rollers are overhead, the Bottom Sill and Clear Jambs are uncluttered, making cleaning easy. Available in up to six stock sizes. Extrusions, Bottom Guides, Hardware Packages, and other accessories may be ordered separately as well. Custom Kits are available in multiple configurations and are cut-to-size for easy field installation, click here to inquire about custom sizes.

Finishes:

CRL Cottage Style 72″ x 60″ Kit for 3/8″ Glass

Catalog Number: CK387260BA
Finish: BRITE ANODIZED

Designed for 3/8″ (10mm) Glass. Bolt-Through Top Hangers Provide for Immediate Fabrication and Installation
Brite Anodized, Brite Gold Anodized, Brushed Nickel and Oil Rubbed Bronze finishes are available in Stock Sizes. Utilizes Clear Polycarbonate Jambs Instead of Traditional Metal Jambs
Custom Cut-to-Size Units Available

Cottage Series CK Sliders are unique in that they utilize clear polycarbonate side jambs instead of traditional metal side jambs, thus providing more of the popular ‘all-glass’ look. Bolt-Through Top Hangers allow immediate fabrication and installation, with no waiting for messy adhesive to dry. Cottage Series Kits come in Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze finishes, with other finishes available on special order. The top hung stock units include: Header, Top Hangers for 1/4 inch (6 millimeter) or 3/8 inch (10 millimeter) glass, Clear Polycarbonate Side Jambs, Bottom Sill, Back-to-Back Knob, 24 inch (610 millimeter) Towel Bar, Nylon Rollers, Bottom Guide, Screws, and Bumpers. Tempered glass and silicone sealant are supplied by the installer to complete the installation. Since all rollers are overhead, the Bottom Sill and Clear Jambs are uncluttered, making cleaning easy. Available in up to six stock sizes. Extrusions, Bottom Guides, Hardware Packages, and other accessories may be ordered separately as well. Custom Kits are available in multiple configurations and are cut-to-size for easy field installation, click here to inquire about custom sizes.

Finishes:

CRL Cottage Style 60″ x 80″ Kit for 3/8″ Glass

Catalog Number: CK386080BA
Finish: BRITE ANODIZED

Designed for 3/8″ (10mm) Glass. Bolt-Through Top Hangers Provide for Immediate Fabrication and Installation
Brite Anodized, Brite Gold Anodized, Brushed Nickel and Oil Rubbed Bronze finishes are available in Stock Sizes. Utilizes Clear Polycarbonate Jambs Instead of Traditional Metal Jambs
Custom Cut-to-Size Units Available

Cottage Series CK Sliders are unique in that they utilize clear polycarbonate side jambs instead of traditional metal side jambs, thus providing more of the popular ‘all-glass’ look. Bolt-Through Top Hangers allow immediate fabrication and installation, with no waiting for messy adhesive to dry. Cottage Series Kits come in Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze finishes, with other finishes available on special order. The top hung stock units include: Header, Top Hangers for 1/4 inch (6 millimeter) or 3/8 inch (10 millimeter) glass, Clear Polycarbonate Side Jambs, Bottom Sill, Back-to-Back Knob, 24 inch (610 millimeter) Towel Bar, Nylon Rollers, Bottom Guide, Screws, and Bumpers. Tempered glass and silicone sealant are supplied by the installer to complete the installation. Since all rollers are overhead, the Bottom Sill and Clear Jambs are uncluttered, making cleaning easy. Available in up to six stock sizes. Extrusions, Bottom Guides, Hardware Packages, and other accessories may be ordered separately as well. Custom Kits are available in multiple configurations and are cut-to-size for easy field installation, click here to inquire about custom sizes.

Finishes:

CRL Cottage Style 60″ x 72″ Kit for 3/8″ Glass

Catalog Number: CK386072BA
Finish: BRITE ANODIZED

Designed for 3/8″ (10mm) Glass. Bolt-Through Top Hangers Provide for Immediate Fabrication and Installation
Brite Anodized, Brite Gold Anodized, Brushed Nickel and Oil Rubbed Bronze finishes are available in Stock Sizes. Utilizes Clear Polycarbonate Jambs Instead of Traditional Metal Jambs
Custom Cut-to-Size Units Available

Cottage Series CK Sliders are unique in that they utilize clear polycarbonate side jambs instead of traditional metal side jambs, thus providing more of the popular ‘all-glass’ look. Bolt-Through Top Hangers allow immediate fabrication and installation, with no waiting for messy adhesive to dry. Cottage Series Kits come in Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze finishes, with other finishes available on special order. The top hung stock units include: Header, Top Hangers for 1/4 inch (6 millimeter) or 3/8 inch (10 millimeter) glass, Clear Polycarbonate Side Jambs, Bottom Sill, Back-to-Back Knob, 24 inch (610 millimeter) Towel Bar, Nylon Rollers, Bottom Guide, Screws, and Bumpers. Tempered glass and silicone sealant are supplied by the installer to complete the installation. Since all rollers are overhead, the Bottom Sill and Clear Jambs are uncluttered, making cleaning easy. Available in up to six stock sizes. Extrusions, Bottom Guides, Hardware Packages, and other accessories may be ordered separately as well. Custom Kits are available in multiple configurations and are cut-to-size for easy field installation, click here to inquire about custom sizes.

Finishes:

CRL Cottage Style 60″ x 72″ Kit for 3/8″ Glass

Catalog Number: CK386072BA
Finish: BRITE ANODIZED

Designed for 3/8″ (10mm) Glass. Bolt-Through Top Hangers Provide for Immediate Fabrication and Installation
Brite Anodized, Brite Gold Anodized, Brushed Nickel and Oil Rubbed Bronze finishes are available in Stock Sizes. Utilizes Clear Polycarbonate Jambs Instead of Traditional Metal Jambs
Custom Cut-to-Size Units Available

Cottage Series CK Sliders are unique in that they utilize clear polycarbonate side jambs instead of traditional metal side jambs, thus providing more of the popular ‘all-glass’ look. Bolt-Through Top Hangers allow immediate fabrication and installation, with no waiting for messy adhesive to dry. Cottage Series Kits come in Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze finishes, with other finishes available on special order. The top hung stock units include: Header, Top Hangers for 1/4 inch (6 millimeter) or 3/8 inch (10 millimeter) glass, Clear Polycarbonate Side Jambs, Bottom Sill, Back-to-Back Knob, 24 inch (610 millimeter) Towel Bar, Nylon Rollers, Bottom Guide, Screws, and Bumpers. Tempered glass and silicone sealant are supplied by the installer to complete the installation. Since all rollers are overhead, the Bottom Sill and Clear Jambs are uncluttered, making cleaning easy. Available in up to six stock sizes. Extrusions, Bottom Guides, Hardware Packages, and other accessories may be ordered separately as well. Custom Kits are available in multiple configurations and are cut-to-size for easy field installation, click here to inquire about custom sizes.

Finishes:

CRL Cottage Style 60″ x 60″ Kit for 3/8″ Glass

Catalog Number: CK386060BA
Finish: BRITE ANODIZED

Designed for 3/8″ (10 mm) Glass. Bolt-Through Top Hangers Provide for Immediate Fabrication and Installation
Brite Anodized, Brite Gold Anodized, Brushed Nickel and Oil Rubbed Bronze finishes are available in Stock Sizes. Utilizes Clear Polycarbonate Jambs Instead of Traditional Metal Jambs
Custom Cut-to-Size Units Available

Cottage Series CK Sliders are unique in that they utilize clear polycarbonate side jambs instead of traditional metal side jambs, thus providing more of the popular ‘all-glass’ look. Bolt-Through Top Hangers allow immediate fabrication and installation, with no waiting for messy adhesive to dry. Cottage Series Kits come in Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze finishes, with other finishes available on special order. The top hung stock units include: Header, Top Hangers for 1/4 inch (6 millimeter) or 3/8 inch (10 millimeter) glass, Clear Polycarbonate Side Jambs, Bottom Sill, Back-to-Back Knob, 24 inch (610 millimeter) Towel Bar, Nylon Rollers, Bottom Guide, Screws, and Bumpers. Tempered glass and silicone sealant are supplied by the installer to complete the installation. Since all rollers are overhead, the Bottom Sill and Clear Jambs are uncluttered, making cleaning easy. Available in up to six stock sizes. Extrusions, Bottom Guides, Hardware Packages, and other accessories may be ordered separately as well. Custom Kits are available in multiple configurations and are cut-to-size for easy field installation, click here to inquire about custom sizes.

Finishes:

CRL Cottage Style 72″ x 60″ Kit for 1/4″ Glass

Catalog Number: CK147260BA
Finish: BRITE ANODIZED

Designed for 1/4″ (6 mm) Glass. Bolt-Through Top Hangers Provide for Immediate Fabrication and Installation
Brite Anodized, Brite Gold Anodized, Brushed Nickel and Oil Rubbed Bronze finishes are available in Stock Sizes. Utilizes Clear Polycarbonate Jambs Instead of Traditional Metal Jambs
Custom Cut-to-Size Units Available

Cottage Series CK Sliders are unique in that they utilize clear polycarbonate side jambs instead of traditional metal side jambs, thus providing more of the popular ‘all-glass’ look. Bolt-Through Top Hangers allow immediate fabrication and installation, with no waiting for messy adhesive to dry. Cottage Series Kits come in Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze finishes, with other finishes available on special order. The top hung stock units include: Header, Top Hangers for 1/4 inch (6 millimeter) or 3/8 inch (10 millimeter) glass, Clear Polycarbonate Side Jambs, Bottom Sill, Back-to-Back Knob, 24 inch (610 millimeter) Towel Bar, Nylon Rollers, Bottom Guide, Screws, and Bumpers. Tempered glass and silicone sealant are supplied by the installer to complete the installation. Since all rollers are overhead, the Bottom Sill and Clear Jambs are uncluttered, making cleaning easy. Available in up to six stock sizes. Extrusions, Bottom Guides, Hardware Packages, and other accessories may be ordered separately as well. Custom Kits are available in multiple configurations and are cut-to-size for easy field installation, click here to inquire about custom sizes.

Finishes:

CRL Cottage Style 60″ x 72″ Kit for 1/4″ Glass

Catalog Number: CK146072BA
Finish: BRITE ANODIZED

Designed for 1/4″ (6 mm) Glass. Bolt-Through Top Hangers Provide for Immediate Fabrication and Installation
Brite Anodized, Brite Gold Anodized, Brushed Nickel and Oil Rubbed Bronze finishes are available in Stock Sizes. Utilizes Clear Polycarbonate Jambs Instead of Traditional Metal Jambs
Custom Cut-to-Size Units Available

Cottage Series CK Sliders are unique in that they utilize clear polycarbonate side jambs instead of traditional metal side jambs, thus providing more of the popular ‘all-glass’ look. Bolt-Through Top Hangers allow immediate fabrication and installation, with no waiting for messy adhesive to dry. Cottage Series Kits come in Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze finishes, with other finishes available on special order. The top hung stock units include: Header, Top Hangers for 1/4 inch (6 millimeter) or 3/8 inch (10 millimeter) glass, Clear Polycarbonate Side Jambs, Bottom Sill, Back-to-Back Knob, 24 inch (610 millimeter) Towel Bar, Nylon Rollers, Bottom Guide, Screws, and Bumpers. Tempered glass and silicone sealant are supplied by the installer to complete the installation. Since all rollers are overhead, the Bottom Sill and Clear Jambs are uncluttered, making cleaning easy. Available in up to six stock sizes. Extrusions, Bottom Guides, Hardware Packages, and other accessories may be ordered separately as well. Custom Kits are available in multiple configurations and are cut-to-size for easy field installation, click here to inquire about custom sizes.

Finishes:

CRL Cottage Style 60″ x 60″ Kit for 1/4″ Glass

Catalog Number: CK146060BA
Finish: BRITE ANODIZED

Designed for 1/4″ (6 mm) Glass. Bolt-Through Top Hangers Provide for Immediate Fabrication and Installation
Brite Anodized, Brite Gold Anodized, Brushed Nickel and Oil Rubbed Bronze finishes are available in Stock Sizes. Utilizes Clear Polycarbonate Jambs Instead of Traditional Metal Jambs
Custom Cut-to-Size Units Available

Cottage Series CK Sliders are unique in that they utilize clear polycarbonate side jambs instead of traditional metal side jambs, thus providing more of the popular ‘all-glass’ look. Bolt-Through Top Hangers allow immediate fabrication and installation, with no waiting for messy adhesive to dry. Cottage Series Kits come in Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze finishes, with other finishes available on special order. The top hung stock units include: Header, Top Hangers for 1/4 inch (6 millimeter) or 3/8 inch (10 millimeter) glass, Clear Polycarbonate Side Jambs, Bottom Sill, Back-to-Back Knob, 24 inch (610 millimeter) Towel Bar, Nylon Rollers, Bottom Guide, Screws, and Bumpers. Tempered glass and silicone sealant are supplied by the installer to complete the installation. Since all rollers are overhead, the Bottom Sill and Clear Jambs are uncluttered, making cleaning easy. Available in up to six stock sizes. Extrusions, Bottom Guides, Hardware Packages, and other accessories may be ordered separately as well. Custom Kits are available in multiple configurations and are cut-to-size for easy field installation, click here to inquire about custom sizes.

Finishes:

eXTReMe Tracker