Tag Archives: Wipes

CRL 135º Magnetic Profile

Catalog Number: PMD10

Provide Positive Door Closure
Made of Co-Extruded Material with Soft Magnetic Receiver
Mix and Match Configurations to Achieve Desired Result

This CRL Magnetic Profile provides positive door closure for glass-to-glass applications. It is made of co-extruded material with soft magnetic receiver and will accommodate 1/4 to 3/8 inch (6 to 10 millimeter) Glass.

Finishes:

CRL 90º Magnetic Profile

Catalog Number: PMC8

Provide Positive Door Closure
Made of Co-Extruded Material with Soft Magnetic Receiver
Mix and Match Configurations to Achieve Desired Result

This CRL Magnetic Profile provides positive door closure for glass-to-glass applications. It is made of co-extruded material with soft magnetic receiver and will accommodate 1/4 to 5/16 inch (6 to 8 millimeter) Glass.

Finishes:

CRL 45º Magnetic Profile

Catalog Number: PMA8

Provide Positive Door Closure
Made of Co-Extruded Material with Soft Magnetic Receiver
Mix and Match Configurations to Achieve Desired Result

This CRL Magnetic Profile provides positive door closure for glass-to-glass applications. It is made of co-extruded material with soft magnetic receiver and will accommodate 1/4 to 5/16 inch (6 to 8 millimeter) Glass.

Finishes:

CRL One-Piece Polycarbonate Bottom Rail with Clear Wipe

Catalog Number: P501BR

Two Sizes Available
Single-Piece Bottom Shower Door Sweep
Snaps Onto Door Bottom to Achieve a Seal
98″ (2.49 m) Stock Length

This ultra clear CRL One-Piece Bottom Rail With Clear Wipe in snapped on the bottom of the door to achieve a seal. Because it is a single piece sweep, it means the vinyl seal that hangs down from the sweep will firmly direct water back into the shower enclosure.

Finishes:

CRL Large Translucent Vinyl Bulb Seal


Catalog Number: SDLB

Most Popular Use is for Hinge Side Seal
Bulb Compresses When Door Closes
Applies With VHB Tape
98″ (2.49 m) Stock Length

CRL Translucent Vinyl Bulb Seal can be used on inswing or outswing doors. Cat. No. SDLB closes gaps from 3/16 to 3/8 inches (5 to 10 millimeters) Cat. No. SDTB closes gaps from 5/32 to 7/32 inches (4 to 5.5 millimeters). Cat. No. SDTJ closes gaps from 1/8 to 5/32 inches (3 to 4 millimeters). Adhere rigid flat base to glass edge or wall using our Clear Very Hi-Bond Tape. Minimum order is five each. Packing Charge added to orders fewer than 10 combined lengths.

Finishes:

CRL Translucent Vinyl Edge “L” Seals

Catalog Number: SDTL

•Used for Outswinging Doors Only
•Can be used on Both Hinge and Strike Jambs

•One Rigid and One Soft Leg
•98″ (2.49 m) Stock Length

Our CRL Translucent “L” Seal is for use on outswing doors, and can be used on both hinge and strike side jambs. The rigid 5/16 inch (8 millimeter) leg is applied using our Clear Very Hi-Bond Tape. Soft 3/8 inch (10 millimeter) leg acts as a seal and allows for a quiet and forgiving door closure. Minimum order is five each. Packing Charge added to orders fewer than 10 combined lengths.

Finishes:

CRL Translucent Vinyl Edge “V” Seal for 1/4″ Maximum Gap

Catalog Number: SDTS

•Used for Doors That Swing Only One Way
•One Rigid and One Soft Leg

•Seals Gaps from 3/16 to 1/4″ (5 to 6 mm)
•98″ (2.49 m) Stock Length

Our CRL Translucent “V” shaped Edge Seal is used only on doors swinging one way to seal gaps from 3/16 to 1/4 inch (5 to 6 millimeter). Adhere 5/16 inch (8 millimeter) rigid leg to glass edge or wall using our Clear Very Hi-Bond Tape. Door closes into soft vinyl leg. Minimum order is five each. Packing Charge added to orders fewer than 10 combined lengths.

Finishes:

CRL Translucent Vinyl Bulb Seal 7/32″ Gap

Catalog Number: SDTB

•Most Popular Use is for Hinge Side Seal
•Bulb Compresses When Door Closes
•Applies With VHB Tape
•98″ (2.49 m) Stock Length

CRL Translucent Vinyl Bulb Seal can be used on inswing or outswing doors. Cat. No. SDLB closes gaps from 3/16 to 3/8 inches (5 to 10 millimeters) Cat. No. SDTB closes gaps from 5/32 to 7/32 inches (4 to 5.5 millimeters). Cat. No. SDTJ closes gaps from 1/8 to 5/32 inches (3 to 4 millimeters). Adhere rigid flat base to glass edge or wall using our Clear Very Hi-Bond Tape. Minimum order is five each. Packing Charge added to orders fewer than 10 combined lengths.

Finishes:

CRL Translucent Silicone Bulb Seal

Catalog Number: S1LB

•Can be Used on Inswing and Outswing Doors
•Close Gaps from 1/16 to 3/16 Inches (1.6 to 5 mm)

•98″ (2.49 m) Stock Length

This CRL Translucent Silicone Bulb Seal can be used on inswing or outswing doors to close gaps from 1/16 to 3/16 inch (1.6 to 5 millimeters). Adhere flat base to glass edge or wall using our Clear Silicone Sealant. Minimum order is five each. Packing Charge added to orders fewer than 10 combined lengths.

Finishes:

CRL Translucent Vinyl “Double Fin” Seal

Catalog Number: SDTDF

•Can Be Used With Inswing or Outswing Doors
•Different Length Legs Allow Versatility
•Can be Trimmed Easily

•98″ (2.49 m) Stock Length

The CRL Translucent “Double Leg” Seal can be used for inswing or outswing doors. The two different size legs allow the installer a choice of seal lengths. Use as is, or simply trim the legs as necessary. Adhere 5/16 inch (8 millimeter) rigid base to either glass edge or wall using our Clear Very Hi-Bond Tape. Minimum order is five each. Packing Charge added to orders fewer than 10 combined lengths.

Finishes:

CRL Translucent Vinyl Edge “T” Wipe

Catalog Number: SDTW

•7/16″ (11 mm) Leg Offers Design Flexibility
•98″ (2.49 m) Stock Length

Our CRL Translucent “T” shaped Edge Wipe can be used on inswing or outswing doors. Leg Closes gaps up to 7/16 inch (11 millimeter) and can be trimmed for smaller gaps. Adhere 5/16 inch (8 millimeter) rigid base to either glass edge or wall using our Clear Very Hi-Bond Tape. Minimum order is five each. Packing Charge added to orders fewer than 10 combined lengths.

Finishes:

CRL Clear Co-Extruded Bottom Wipe with Drip Rail for 5/16″ Glass

Catalog Number: P956WS

•Our Most Popular Bottom Sweep
•Snaps on Bottom of Door

•45 Degree Drip Rail Assists in Deflecting Water Back Into Enclosure
•98″ (2.49 m) Stock Lengths

The CRL Clear Bottom Wipe with Drip Rail snaps onto bottom of door. The soft wipes on bottom create a water resistant seal. 45 degree Drip Rail sheds water back into the shower stall.

Finishes:

CRL Polycarbonate Bottom Rail With Wipe for 5/16″ Glass

Catalog Number: P450BR

•Includes Insert Slot With Our SDTW “T” Wipe Included
•Snaps Onto Door Bottom to Achieve a Seal

•98″ (2.49 m) Stock Length

This CRL Clear Polycarbonate Bottom Rail with Wipe is snapped onto door bottom to achieve a seal. It includes our No. SDTW Translucent “T” Wipe.

Finishes:

CRL Multi-Purpose “H” Wipe for 1/4″ Glass

Catalog Number: P250HW

•One of Our Most Versatile Seals
•Available for Four Glass Thicknesses

•98″ (2.49 m) Stock Lengths
•Can be Used as a Bottom Sweep or as Seal

CRL’s Versatile Multi-Purpose “H” Wipe has two rigid legs and two soft legs. It can be used as a bottom sweep, or as a seal if run vertically up the edge of the door. One or both soft legs can be trimmed to accommodate many installation options. Installs easily by simply pressing on to edge of glass.

Finishes:

CRL Dual Durometer PVC Seal and Wipe for 1/4″ Glass


Catalog Number: P14WS

•Versatile Seal Can Be Used as Bottom Sweep, or Vertically on Bi-Fold Doors
•Snap on Application

•98″ (2.49 m) Stock Lengths

This CRL Clear Dual Durometer PVC Seal and Wipe has two uses: Snap it on door bottom and the soft lip acts as a wipe; snap it on an overlapping bi-fold door and the soft lip acts as a seal.

Finishes:

CRL “h” Inline Panel Seal With Vinyl Cushion Fin for 180 Degree Application

Catalog Number: PCK8

•Soft Vinyl Cushions Door Closure
•Snaps Easily Into Place

•98″ (2.49 m) Stock Length

CRL’s “h” Inline Panel Seal with Vinyl Cushion Fin for 180 Degree Application is for use on inline glass-to-glass installations. Snap onto the fixed panel with the lip on the strike side. Soft vinyl helps cushion door closure and reduce noise.

Finishes:

CRL Clear Multi-Purpose Polycarbonate Strike Angle Jamb for 1/4″ to 1/2″ Glass

Catalog Number: P12LJ

•Multiple Uses for Versatility
•Commonly Used in 135 Degree Neo-Angle Applications
•98″ (2.49 m) Stock Length

This CRL Clear Polycarbonate Strike Angle Jamb is used for both hinge and strike jambs. It can be adhered to the wall of a fixed panel using our CRL Clear Very Hi-Bond Tape. It is commonly used as a jamb for neo-angle installations when a clean look is most desired. Minimum order is five each. Packing Charge added to orders fewer than 10 combined lengths.

Finishes:

CRL Polycarbonate 135 Degree Strike Jamb for 5/16″ Glass

Catalog Number: P045SJ

•Popular Neo-Angle Strike Jamb for Mitered Fixed Panel
•Snaps Onto Fixed Panel or Door

•Vinyl Insert Included
•For Glass to Glass Applications

•98″ (2.49 m) Stock Lengths

This CRL Clear Polycarbonate 135 Degree Strike Jamb is snapped onto the fixed mitered strike panel when using hinges in 135 degree neo-angle installations. Vinyl insert is included with each length.

Finishes:

CRL Polycarbonate 135 Degree Door Jamb for 5/16″ Glass

Catalog Number: P045DJ

•Popular Neo-Angle Door Jamb
•Snaps Onto Fixed Panel or Door
•Vinyl Insert Included

•For Glass to Glass Applications
•98″ (2.49 m) Stock Length

This CRL Clear Polycarbonate 135 Degree Door Jamb is snapped onto the door on the hinge side to achieve a seal to the fixed panel in 135 degree neo-angle installations. Clear vinyl insert is included with each length.

Finishes:

CRL “U” Seal Polycarbonate Strike With Leg and Insert at 90 Degrees for 3/8″ Glass

Catalog Number: P090SJ

•Snaps Onto Fixed Panel
•Vinyl Insert Included for Extra Protection

•For Glass to Glass Applications
•98″ (2.49 m) Stock Lengths

This CRL “U” Seal Polycarbonate Strike With Leg and Insert at 90 Degrees is snapped onto the strike side fixed panel at a 90 degree angle from the door. Vinyl insert is included with each length. Configuration and sturdiness of seal contributes to additional protection.

Finishes:

CRL “Y” Inline 180 Degree Panel Seal for 3/8″ Glass

Catalog Number: PCC10

•Soft Vinyl Single Leg for Quieter Door Closure
•Snaps Onto Fixed Panel

•For Glass to Glass Applications
•98″ (2.49 m) Stock Length

This CRL “Y” Inline Panel Seal is for use on 180 degree inline glass-to-glass applications. Snaps on to the fixed panel inline with the door and the lip on the strike side. The “U” portion PVC is rigid, and the single leg is soft to cushion the closing.

Finishes:

CRL Polycarbonate Strike and Door “h” Jamb With Vinyl Insert 180 Degree for 3/8″ Glass

Catalog Number: P180SDJ

•Snaps Onto Fixed Panel or Door
•Vinyl Insert for Added Coverage
•For Glass-to-Glass Applications

•98″ (2.49 m) Stock Length

This CRL Clear 180 degree Polycarbonate Strike and Door “h” Jamb With Vinyl Insert is snapped onto the fixed panel running inline with the door. Contains clear vinyl insert. Sturdiness of this seal makes it one of our better jambs at reducing water leakage for inline installations.

Finishes:

CRL Polycarbonate “h” Jamb 180 Degree for 1/2″ Glass

Catalog Number: P120HJ

•Our Most Popular 180 Degree Inline Seal
•Snaps Onto Fixed Panel or Door

•For Glass to Glass Applications
•98″ (2.49 m) Stock Length

This CRL Clear Polycarbonate “h” Jamb is for use on 180 degree inline glass-to-glass applications. Snap onto the fixed panel with the lip on the strike side, or onto the door with the lip on the hinge side. Leaves a clear appearance while serving as a functional seal. Entire “h” Jamb is made of hard polycarbonate.

Finishes:

CRL Polycarbonate and Vinyl Profile Set

Catalog Number: PVPS95

•6″ (152 mm) Pieces of All Profiles
•Helpful in Calculating Glass Size Deductions
•Allows Customers to Visualize Seals for Their Shower
•Great for Showrooms and Portfolios

We offer this CRL Polycarbonate and Vinyl Profile Set which consists of 6 inch (152 millimeter) pieces of all Wipes and Seals that we carry. Use them to show your customers how they will assist in minimizing water escape from their shower. You will also find them helpful in calculating deductions for final glass size measurements. Our Water Seal and Sweep Profile Set is perfect for your showroom or portfolio so customers can evaluate the various options they will have to seal their new frameless shower enclosure.

Finishes:

eXTReMe Tracker